Ana Box Mod Dna30

[MrWire]

I see there is a similR post in the apv forum but it wont let me post since im a new member.

I bought the anabox dna30 off ebay from alivapors
It should be at my door in the next 2 hours. Tracking confirms this.
I have to brand new sony vtc 5s reads to go.

Quick question to more experienced modds,

I want to test this thing pretty well as I kno its another clone.. it does look MUCH better and cleaner than most dna clones ive seen, however I do not care I want to test and show and see what I got b4 I go balls deep.

Can I test the voltage output and resistance accurately w a multimeter? If so how?
What other steps or things should I do to test?
More than willing to take any pics needed to identify components and everything!
Please let me know what you guys think!

 

[jbarrick]

I posted the op and wanted to hear from people that have used it before buying it.

Can I test the voltage output and resistance accurately w a multimeter? If so how?
yes; Ohm Reader Resistance Tester

What other steps or things should I do to test?
Try did different wattages on different tanks and rba's
test recharging the battery with usb charging cable
watch video on a Cloupor DNA30 Box Mod and compare

FASTTECH

Cloupor DNA30 Box Mod this is a very detailed vid

just use it and good luck with your new mod

 

[MrWire]

Thanks so much on reaching out. I will also take pics and a video for you.
The only thing that kind of worries me a bit is the thin guage wires on the buttons. The power and 510 looks like 18 or 20 guage. I was always told use 20 or below on high power mods. Maybe im wrong?

I ended up paying 40 bucks because I signed up for paypal card and got 30 dollars off my ebay purchase, so if this doesnt workout im not mad. Plus the seller has 14day no questions full refund and 90 day manufacturer warranty.

All I have with me is my nautilus mini with 1.8 ohm Bvc coil. (Visiting relatives, not at home) I will try and go buy a kayfun to do more testing, I think theres a vape shop about 20 min from here.
Any recommendations on good kayfuns or clones to buy for intermediate builder?

Tia

 

[MrWire]

@jbarrick , on the multimeter I ment like an actual electricians multimeter. My uncle has one in the garage. I have a ohm reader at home n not sure I can buy one where im at now. Any clue if its posdible w a standard one?

Ps package arrived early.
Box and packaging was nice and clean cutt. Came w usb cable and mini screw driver. Had a paper cutt out in the battery holder saying place batteries in correctly, similar to cloupor mod. No stickers over pcb board cover. Looks clean. Feels more like plastic not alluminum to me... but it could be powder coated or something (I got black).

Will take pics and video as well as test in a couple hours. Vtc5 is still charging.

Thanks again

 

[TheTurk]

Is the 510 pin adjustable?

 

[jbarrick]

Is the 510 pin adjustable?

great question I for got to ask.

 

[MrWire]

It doesnt seem so. Its a flat top pin. No screw head. Doesnt spring either. Just solid. It is not crooked and seats my nautilus mini pretty flat and even wen I just screwed it on to check looks.

 

[jbarrick]

Keep us updated as you continue testing

 

[MrWire]

Here are some pics I was able to snap real quick.

 

[TheTurk]

I was looking for the one with the adjustable pin , the one from FT looks like the way to go but quick read thru forums on FT makes it look like a horror movie, way too many people with problems , i wonder if there is one out there from cloupor at this price ???

Congrats on the new mod op i hope it helps you stay away from the stinkies ....
And put a Kayfun lite plus v2 on it

 

[MrWire]

Here are the insides...

 

[MrWire]

BTW definitely aluminum. Dont know why initially it felt like plastic. Its cold and collecting warm finger marks.
I think its powder coated tho..

 

[jbarrick]

I was looking for the one with the adjustable pin , the one from FT looks like the way to go but quick read thru forums on FT makes it look like a horror movie, way too many people with problems , i wonder if there is one out there from cloupor at this price ???

I am looking to do the same thing. I place a small order with FT for a test run. Ordered 7.12.14,over a month and still have not got it!
So I started looking on EBay, this is what I came up with.

Dovpo E Mech Mod V3

Cloupor DNA30 Box Mod

KSD DNA 30 Box Mod v3

I still need to do more research on the KDS

 

[The Rebel]

Check out the Ehpro Kayfun clone if you want a nice solid imposter. I bought mine locally (have to support the little guys) so it cost a little more than the internet. Have nothing but good things to say about it and it's performance. Rock solid. Oh and that's the Cloupor DNA30 it's sitting on. Another rock solid performer.

 

[mightymen]

Just place an order. This will replace a Segelei-30 I had to send back and got my money back.

Was going to get DNA 30 from fastech but now there saying 45-60 for delivery.

Was browsing the web for two days and for this price I didn't see any Warranty being offered, yea you can get a Warranty for $30+ MORE, that's BULL.

This is what clinch the deal for me and much neater on the inside also...
Warranty: WE OFFER A 90 DAY WARRANTY AGAINST MANUFACTURER'S DEFECTS ONLY IF PURCHASED THROUGH ALIVAPOR, THE ONLY US DISTRIBUTOR OF ANA BOX CURRENTLY. WARRANTY WILL BE VOID IF YOU EXCEED THE OPERATING DISCHARGE TEMPERATURE (-10 - 60 Degree Celsius). TAMPERING WITH THE ELECTRONICS AND/OR USING A NON-RECOMMENDED BATTERY WILL ALSO VOID YOUR WARRANTY. USE AT YOUR OWN RISK.

 

[MrWire]

About how much does the EHpro kayfun run for in stores?
Is it a lite or version 2.1 or any of that??
I like the black n exposed glass looks dope!


Still waiting for these vtc5s to finish charging on my nite core i2. Soon as they are done il run it thru the tests. Just want to ensure I kno my battery is fully charged first to see all the reading are acurate on the anabox.

 

[mightymen]

Dovpo E Mech Mod V3 sale 69.99 -20% off = $56.01 free shipping (It's a pulse modulation mod though.)
Aquavaporcigs.com has 20% coupon until the 17th "save20" it will bring the price down.

I also was looking at it, read the manual and was not impressed.

 

[MrWire]

Can anyone tell me if such thin gauge wires are scetchy if im gonna push this thing hard? As j mentiones b4 I thought all wire should be 20awg, not just battery and 510. Any thoughts?

 

[The Rebel]

Here's a shot of the wires in my Cloupor. They are covered with the plastic sheet, but you can make them out pretty good. Seem to be thicker than the wires in your Ana.

 

[MrWire]

Wow! Thats a bigg diff!
Hopefully the buttons on this mod are just triggering the chip and the main current isnt running thru them all...