Aromamizer RDTA by Steam Crave

[BoostAddict]

Nice..I am to scared to bring out all my mods together for a group pic. Don't want the wife to see them all together lmao!

 

[cigatron]

I never used the rubber band. Currently I only have a VTC mini and an istick 100w, so I'm running dual claptons, 0.36ohms, at 75w but I can take them to 100w with no dry hits. And I can lay mine down for hours without leaking. I've mentioned in this thread before, I've ridden roller coasters with my Aromamizer without leaks as well. I feel no RTA should leak at all, and from my experience they don't when wicked correctly. That's why I had a love-hate relationship with my Billow v2, that thing was so finicky. I couldn't lay it down for very long before an air bubble would make it's way into the chamber and proceed to push every drop of the 5ml tank through the airflow slots. I finally sold it though. I'm hoping my Bellus will be as leak-free as both my Aromamizers are. *crosses fingers*

Soooo, juice holes covered or not? Assuming covered. I don't cover my airholes either.

100w with claptons is not a very high heat flux. Probably equivalent to 50-60w with my 24g single strand build in my experience. With my current wicking stradegy, wick barely grazing the deck over the juice holes, I am chaining at 85-90w for flavor but can chain at 115w max with no dryhits. But it leaks when laying horz.

I'm asking all these questions to figure out if I'm missing something or perhaps I have a seal leak. Doubt I have a seal leak though cuz it doesn't leak when vertical.

Sounds like I'm just wicking for more power by not allowing the wicktails to lay directly on/in the juice holes and getting leaking when laying horz as a result.

 

[ismokeinbinary]

Soooo, juice holes covered or not? Assuming covered. I don't cover my airholes either.

100w with claptons is not a very high heat flux. Probably equivalent to 50-60w with my 24g single strand build in my experience. With my current wicking stradegy, wick barely grazing the deck over the juice holes, I am chaining at 85-90w for flavor but can chain at 115w max with no dryhits. But it leaks when laying horz.

I'm asking all these questions to figure out if I'm missing something or perhaps I have a seal leak. Doubt I have a seal leak though cuz it doesn't leak when vertical.

Sounds like I'm just wicking for more power by not allowing the wicktails to lay directly on/in the juice holes and getting leaking when laying horz as a result.

Oh, yeah I have the juice holes covered, on my deck I have cotton covering everything all the way the the little "ledge" inside. I'll try to get a pic, but I have some terrible phone cameras..

 

[cigatron]

Does look very nice. I really like the Crius on that mod with those lines going down the mod, matches very nice also. Oh and the firing button matches the Crius RBA cap also, looks real good.

The mod is a Hotcig DNA200. It's a sweet match for the Crius. Nice flavor at 50w.

 

[ismokeinbinary]

The mod is a Hotcig DNA200. It's a sweet match for the Crius. Nice flavor at 50w.

And how does the crius stack up to the Aromamizer, in your experience?

 

[cigatron]

How you like that Crius in comparison to the Aromamizer? I got a Bellus otw from China, was thinking about ordering an MT or a Crius, can't really decide.

If I were to buy one today I'd get the clone from FT with the Velocity Style deck and plastic (peek?) insulator. The ceramic insulators are cracked on most peeps OBS Crius V2 and V3 tanks, mine included.

The Aromamizer flows more juice for better flavor at higher power levels and tastes identical to to plume veil rda with the same build and power levels.

 

[ashtrayogdc]

If I were to buy one today I'd get the clone from FT with the Velocity Style deck and plastic (peek?) insulator. The ceramic insulators are cracked on most peeps OBS Crius V2 and V3 tanks, mine included.

The Aromamizer flows more juice for better flavor at higher power levels.

Ya one of my insulators was badly cracked like in about 4 pieces. The other one just has one crack. I like it enough to get some clones now though.

Sorry for off topic, I don't have an aromamizer but like reading about it. Want to get one some day but waiting for a shweet deal.

 

[ismokeinbinary]

Ya one of my insulators was badly cracked like in about 4 pieces. The other one just has one crack. I like it enough to get some clones now though.

Sorry for off topic, I don't have an aromamizer but like reading about it. Want to get one some day but waiting for a shweet deal.

$20 on vapeNW is about as schweet as it gets. I paid $40 for my OG and $36 for my black one.

 

[cigatron]

$20 on vapeNW is about as schweet as it gets. I paid $40 for my OG and $36 for my black one.

Beat me to it.

 

[NGGrant]

I paid 22.99 on VapeNW for a black 6ml that's not bad at all.

 

[ashtrayogdc]

Hmmm that is pretty good. I wonder what shipping to Canada costs. I really like when stores give you the option to check shipping costs real quick without having to make an account. Maybe I just didn't look hard enough :/

 

[ismokeinbinary]

Hmmm that is pretty good. I wonder what shipping to Canada costs. I really like when stores give you the option to check shipping costs real quick without having to make an account. Maybe I just didn't look hard enough :/

I know there's a banner on the bottom of the page saying if you buy a $6+ bottle of juice you get free shipping. Might work for Canada. *shrugs*

 

[NGGrant]

Hmmm that is pretty good. I wonder what shipping to Canada costs. I really like when stores give you the option to check shipping costs real quick without having to make an account. Maybe I just didn't look hard enough :/

You can check shipping cost in checkout before putting your cc in
I added a 15ml of juice to get free shipping

 

[BoostAddict]

It's slow shipping if you live on the East Coast! I always upgrade to 2 day if ordering from NW..... 75.00 or more they will upgrade to 2 day for free if you tell them you live on the East Coast in the comment box @ check out.

 

[pevinsghost]

Hmmm that is pretty good. I wonder what shipping to Canada costs. I really like when stores give you the option to check shipping costs real quick without having to make an account. Maybe I just didn't look hard enough :/

If you use the MAP coupon code, authentics are $27 from fasttech, which I understand is actually ok ship times for Canadia... and free shipping.

The $20 VapeNW are 3ml, 6ml are $23, so if you were looking to get some other cheap stuff anyway, it's not much price difference.

I'm always cruising ft for tools and such anyway, so it's worth a couple bucks and two week shipping for one site shopping and PayPal payment to me.

Edit: oops, looks like I'm behind on pricing, the $20 is 6ml

 

[ashtrayogdc]

If you use the MAP coupon code, authentics are $27 from fasttech, which I understand is actually ok ship times for Canadia... and free shipping.

The $20 VapeNW are 3ml, 6ml are $23, so if you were looking to get some other cheap stuff anyway, it's not much price difference.

I'm always cruising ft for tools and such anyway, so it's worth a couple bucks and two week shipping for one site shopping and PayPal payment to me.

Ah must have missed the MAP code on FT for this one, will check that out when I make my next order from there. Thanks.

 

[Highwayman1224]

Love my aromamizer on top of my new rx200! Both of these were EXTREMELY good purchases!

 

[dwcraig1]

Love my aromamizer on top of my new rx200! Both of these were EXTREMELY good purchases! View attachment 517916

Look is that unopened vape mail on the couch?

 

[Highwayman1224]

Look is that unopened vape mail on the couch?

Haha, no it's stuff that is getting mailed!

 

[jcash74]

My first build (twisted 26ga dual coils) wicked great and tasted very good once I applied the correct amount of power. My 2nd build is a 26ga dual coil .62 ohm @ 45 watts. I keep getting dry hits on it though. I turned it down but sure enough after a couple puffs another dry hit. I know it must be my wicking but I've removed cotton and pulled the cotton up and cut more off but I still get dry hits.
I need a work safe build (less vapor) and can't seem to get it right. Any suggestions? I apologize but I can't post a pic at the moment. I have less cotton now then I used in previous build.

Sent from my SM-N910W8