Ask IMAGINE & S_Steve - Thread :)

[Gormy]

Not yet, but I can I guess. 90% of what I vape is based on my coffee extracts with different flavors used for accents. If I cannot vape this through it then the clearomizer will not work for me...

I'm thinking you may of gotten a dud. Even i was able to figure out how to fill it without a mess and have had no issues with flavor. This of right out of the plastic. No cleaning. Did you order any others to try? I've also laid this bad boy every which way. Only thing is the color of the juice (started as a nice pink looks a little icky now. LOL. Kind of a dark brownish pink. Assuming it's from the fact that more sun can get to it? I was outside most of the day. Tastes the same though so all is well.

Sent from my ADR6300 using Tapatalk

 

[Semiretired]

I'm thinking you may of gotten a dud. Even i was able to figure out how to fill it without a mess and have had no issues with flavor. This of right out of the plastic. No cleaning. Did you order any others to try? I've also laid this bad boy every which way. Only thing is the color of the juice (started as a nice pink looks a little icky now. LOL. Kind of a dark brownish pink. Assuming it's from the fact that more sun can get to it? I was outside most of the day. Tastes the same though so all is well.

Sent from my ADR6300 using Tapatalk

Now that you mentioned it - the juice did change color over time. I would bet it is the heat from the vaping that is causing it. These things really are not designed to fill and use over several days or several weeks - they are designed to vape. I cannot understand when some one wants a 5ml tank. I like to change my flavors to much... That is why I bought two of these so I could load two flavors and change through out the day. I vape about 3ml a day so two would be just about right... Made sense to me... Now I just got to figure this bad taste out. I am going to try the other one this morning. I cleaned the other one again. We will see...

 

[Retriever]

Not every vaper/delivery/juice combination is going to be a hit...if a gazillion reviews have taught us anything, it's that. Try it with a different juice. Even cartomizers, which seem to be the most level playing field, deliver a different experience with different juices for different people. Just like there is no perfect car for everybody, there is no perfect carto/clearo/atty/tank/whetaver that will be for everyone.

I think these clearomizers would be perfect for me if the wick was at the bottom. I was so excited when I first filled one of them up because the things put out an amazing amount of vapor. Much better than the regular cartos IMO. It is just a pain to have to turn it upside down to wet the wicks. I know, I'm being picky.

 

[Imagine]

I am looking in to this today for you.

Imagine my personal coupon code doesn't work, it says the code is not valid.
I already mailed Rob through the system, i asked on live chat 4-5 days a go and no one checked it.
Could you check it? YOURVOLT84

 

[Imagine]

it is working correctly on our end...

I am looking in to this today for you.

Originally Posted by Konstantine
Imagine my personal coupon code doesn't work, it says the code is not valid.
I already mailed Rob through the system, i asked on live chat 4-5 days a go and no one checked it.
Could you check it? YOURVOLT84

 

[Konstantine]

Thank you! It works now.

 

[Mr.Bogart]

Got my blank carto's and my green manual battery today. Really like your products, so much better than what I started with. I still want a lime green battery with a purple LED though lol. I'll be ordering more from you guys. Waiting on a mega pcc v3..if that ever happens? Anyways thanks for a good product and good luck with everything!

 

[Semiretired]

Imagine, I tried the other clearo and no metallic taste - so the first one definitely has something wrong with it. So what do I do now...

 

[Imagine]

just email CS on our Contact us page and tell them I helped you trouble shoot they can either send you out a new one or give you points that equal the cost.

Imagine, I tried the other clearo and no metallic taste - so the first one definitely has something wrong with it. So what do I do now...

 

[Semiretired]

Thanks... I will do that tomorrow morning.

I can tell you that this thing does not really like my coffee extracts - flavor is very low, but it vapes out the ying yang and is gives a cooler vape than the 78's... It worked great with sweet mixes though - flavor came through great.

They do dry out easily though. 2 or 3 draws and on the 3rd draw the vapor starts to drop off... Got to give it time to wick... I am going to have to try one coffee mix with a little extra flavor to see if that helps next mix cycle...

 

[Imagine]

also try always tilting the end up when you vape

Thanks... I will do that tomorrow morning.

I can tell you that this thing does not really like my coffee extracts - flavor is very low, but it vapes out the ying yang and is gives a cooler vape than the 78's... It worked great with sweet mixes though - flavor came through great.

They do dry out easily though. 2 or 3 draws and on the 3rd draw the vapor starts to drop off... Got to give it time to wick... I am going to have to try one coffee mix with a little extra flavor to see if that helps next mix cycle...

 

[Semiretired]

When I vape it is horizontal and I lay it on the desk horizontal. I take some pretty good draws - just does not wick fast enough for my draws... I will adapt to it...

 

[EleanorR]

yes I would try the other one.. the resistance may just be off and need to be replaced.

Speaking of, what IS the resistance (range) of these Clearos? (Need another sale soon so I can wipe out your inventory of them )


Edit: Never mind, I found it on the very first post announcing the availability of the clearos: 2.6-2.9 ohms.

 

[Amethyst_Star]

Imagine, my clearomizer is cracked in three places. I've only been using it since Saturday evening. The cracks are down below where the fluid doesn't get, on the inside (it's doesn't leak). What would cause this? Is there anyway I can get it replaced? I'm going to post a pic below and hopefully you can see them.

Thank you!

Edit: I didn't drop it.

 

[StarChacer]

Retriever--you need to let your X2 lay side-ways or with the clearo slightly tilted down, as the liquid level goes down. The wicks are little short dudes, up near the top. These things DO NOT LEAK, so you can lay it down with confidence.
I"ll let someone else speak to the protections on these.

I have experience no leaks per say, but if you draw on it when it is above horizontal it pours niquid into your mouth. Vaping in bed was interesting.

 

[RickMc]

Thanks... I will do that tomorrow morning.

I can tell you that this thing does not really like my coffee extracts - flavor is very low, but it vapes out the ying yang and is gives a cooler vape than the 78's... It worked great with sweet mixes though - flavor came through great.

They do dry out easily though. 2 or 3 draws and on the 3rd draw the vapor starts to drop off... Got to give it time to wick... I am going to have to try one coffee mix with a little extra flavor to see if that helps next mix cycle...

Different juices definitely perform differently in clearomizers...and in carto's too, for that matter. In my (limited) experience, thicker and darker juices don't vape as well in clearomizers, so I only use those in carto's.

 

[Imagine]

Well cracking can happen from a lot of things I would suppose.. twisting to tightly.. tapping it on a table..biting the carto... pinching the carto...cleaning it in boiling water... etc..I have not had that happen to one yet so I am not sure exactly..

is it leaking?

Imagine, my clearomizer is cracked in three places. I've only been using it since Saturday evening. The cracks are down below where the fluid doesn't get, on the inside (it's doesn't leak). What would cause this? Is there anyway I can get it replaced? I'm going to post a pic below and hopefully you can see them.

Thank you!

Edit: I didn't drop it.

 

[Amethyst_Star]

Well cracking can happen from a lot of things I would suppose.. twisting to tightly.. tapping it on a table..biting the carto... pinching the carto...cleaning it in boiling water... etc..I have not had that happen to one yet so I am not sure exactly..

is it leaking?

No, it's not leaking. I've been watching it and the cracks seem to be containing themselves to the bottom. My hubby suggested that I may have tightened it too tight at one time. I'm going to order more soon and use this one 'til it shows signs that the cracks have worsened or it starts leaking.

 

[rave]

No, it's not leaking. I've been watching it and the cracks seem to be containing themselves to the bottom. My hubby suggested that I may have tightened it too tight at one time. I'm going to order more soon and use this one 'til it shows signs that the cracks have worsened or it starts leaking.

I've had this happen with other clearos that I've tried in the past. It's a good idea to wrap the weak area with a piece of tape all the way around. A label would work well also if you have a label maker.

 

[Amethyst_Star]

I've had this happen with other clearos that I've tried in the past. It's a good idea to wrap the weak area with a piece of tape all the way around. A label would work well also if you have a label maker.

Thanks, Rave. I'll do that!