Seems like too much work :/ I might just stick to the original specs and dental floss all the way. Meh
Burping out loud using Tapatalk
Attack of the (Kayfun v4) Clones!
- Thread starter KTMRider
- Start date
- th_trl_thread_readers 0
- Status
Seems like too much work :/ I might just stick to the original specs and dental floss all the way. Meh
Burping out loud using Tapatalk
Mine is the Tobeco haha! It only wobbles when the juoice control is closed. I thought I "fixed" it last night but seems like my juice control is stuck open again today..
Welp. Been vaping on the FT Type A since last night. So far so good apart from the slow seep that I'll try to fix with an oring later. The resistance has settled to a steady 0.2 ohm, although I don't mess with the juice control and just keep it wide opened.
Burping out loud using Tapatalk
Burping out loud using Tapatalk
Most here seem to be saying the Tobeco is the same as the authentic. Mine isn't.
On my authentic the juice flow holes are parallel and equidistant from the posts.
On my Tobeco they still look to be parallel but are slightly out of true - one hole on each side is right up to the post. It's probably under a millimeter, but is noticeable.
I'd be interested if other Tobeco owners could check the alignment of their juice flow holes so I know if it is a standard Tobeco machining error, or if it's just me.
On my authentic the juice flow holes are parallel and equidistant from the posts.
On my Tobeco they still look to be parallel but are slightly out of true - one hole on each side is right up to the post. It's probably under a millimeter, but is noticeable.
I'd be interested if other Tobeco owners could check the alignment of their juice flow holes so I know if it is a standard Tobeco machining error, or if it's just me.
Mine came yesterday, while I was napping between shifts: my initial observations came from rushing because I wanted to try it t work.
Got home, disassembled and cleaned eveerything, let it dry. Before laying down for another nap, put everything back together and filled: worked great, no problems. Closed the juice control, and put it in my vape stand
Several hours later, woke up: lil bit of seepage through the air holes. As in "I can see a couple drops ready to come out" Still works just fine.
Not sure of manufacture: was an Evilbay purchase. Thinking I'll pick up the EHPro at Sweet Vapes next paycheck (they're local to me, and always give good service)
Got home, disassembled and cleaned eveerything, let it dry. Before laying down for another nap, put everything back together and filled: worked great, no problems. Closed the juice control, and put it in my vape stand
Several hours later, woke up: lil bit of seepage through the air holes. As in "I can see a couple drops ready to come out" Still works just fine.
Not sure of manufacture: was an Evilbay purchase. Thinking I'll pick up the EHPro at Sweet Vapes next paycheck (they're local to me, and always give good service)
It says "AMOD" up toward the top of page on the non-Ebay Codevape page
AMOD
KAYFUN V4 RDA CLONE [SS]
$24.95
SKU:
JOY-KYFUN-V4
Weight:
8.00 Ounces
Shipping:
Calculated at checkout
Quantity:
Last edited:
Just ordered 2 of the infinite clones ..one for me and another for a friend ....I'll let you guys know how they compare to other clones ....I had the szeaster clone and it was complete garbage ..I'm praying theses are better lol
I look forward to hearing your thoughts... I want one more but not sure which brand. kinda leaning towards infinite.
Infinite, at least the KFL and Magma I have, are top notch. While their KFL+ v2 doesn't have the awesome airflow my EHPro does, its a hell of a lot "tougher" as far as its construction. The EHPro is pretty thin metal, where I'm sure I could hurt someone if I threw the Infinite at em.
It knocks my Vamo over its so much heavier.How is the Kayfun at .2 ohms? Mine is around .8 - 1 ohm and it vapes quite nicely. The only problem I'm having is the airflow is still very restrictive. I think I'm going to take the airflow screw out because it's already out as far as it'll go before the 510 pin hits it.
Oh. It's good but the only reason why I'm building t at 0.2 ohms is because I'm using it with dna40 + Ni200 wires. It's a good vape. I've left out the Afc grub screw completely tho
Burping out loud using Tapatalk
Ah, gotcha, I didn't see that, had only checked out their mobile site, which doesn't seem to show that.
Either way, I still doubt it will be an a-mod branded product. I checked the a-modvapor.com site, and wotofo on alibaba and no kayfun v4s in sight.
Sent from my Nexus 6 using Tapatalk
I probably need to do this too. I'm running a twisted 29ga at .9 ohms/15 watts, but I still get better hits on my KFL hah.
Nope, nothing. Received an email with a shipping notification Friday. I checked with postal website and it hasn't even been given to them for shipment. I have sent emails everyday since Saturday to Artemus and have not received any reply. This will be the last time I do business with this seller. Terrible!
- Status
