Metric Buna O-rings 12 x 1.5mm Price for 50 pcs - Orings and More
$2.90 and shipping was fairly cheap (under $3). I ordered 3 different sizes each time.
Attack of the (Kayfun v4) Clones!
- Thread starter KTMRider
- Start date
- th_trl_thread_readers 0
- Status
$2.90 and shipping was fairly cheap (under $3). I ordered 3 different sizes each time.
My V4 Infinite, Silverplay and KBox are all sitting in the mailbox... 
I hope they don't need a signature or it will be a Monday thing.
I hope they don't need a signature or it will be a Monday thing.
My Vaporange Tobeco arrived at my local post office at 5:33 this morning. Should be in my mailbox around noon.
HD
HD
Mines, should be here tomorrow. Has anyone removed the airflow screw on theirs? No leaking?
It probably is a matte finish. Ive seen the Tobecos available in SS, black, blue, and a 'matte' SS as well..
My $9.95 tobeco kayfun v4 from vapor range are perfect on inspections havent built one yet they getting cleaned no oil residues but i can smell it so ill be patient. Thread are smooth everything turning properly im very happy so far. Havent checked for leaks thats where i suspect some problems but the machining is way more than i expected. I had a burr ridden choppy thread tank picture in my head while ordering they surprised me this time.
Dang! Now, I have to go back through this thread to see where the $9.95 Tobeco KF4's are coming from. I thought I got a great price at $19.99 from VapeNW, but for $9.95 I've got to have a couple more for a failsafe parts source,if nothing else. 
I just ordered two from VaporRange.com | Your Online Vape Store. Free US shippping. with free 7 day shipping. I would have paid a few bucks for priority if they'd offered it. They are located in the same area as 101Vape.com and their basic USPS shipping went by truck and obviously stopped off to deliver mail in every little town on the way to GA. It was about 9 or 10 days with no USPS updates after it left California until it hit Atlanta. Then, I got it the next day.
For the $9.99 price its a cheap way to ensure you have parts on hand, if nothing else.
Last edited:
I got them up and running both leak free! Only issue the screws on the deck not the best they those round tops that are kinda soft had one bend a lil bit and it touched the chimney. A lil touch with the pliers and it was fine. All and all i very satified with my $10 atty.
So.... How many did you order?
Just one...
It's all your fault. It's a Kayfun clone--how bad can it be? I hope it's better for a hopeless MTL tootle puffer like myself than my Lemo Drop.
I also just got two Erlkonigins nano (I love this forum
).There shipping really fast for me always one of the best i have. I get the cheap shipping first class i think it is and it gets to me in 3 days in Massachusetts.
I finally received my Kayfun V4 clone from the Focal Ecig "group buy" last night. I have to say, I am impressed with it. For $13, I did not receive the jenky clone I was expecting. Machining and finish on it is overall very nice. It's a complete and total knockoff, complete with Svoemesto box, parts diagram and security seal. It also included all 3 tank configurations.
I spent a few minutes taking it apart and re-assembling it to familiarize myself with it and get a grasp of how the "juice control" works. The threading on it for the most part is very smooth, with only the juice control ring feeling slightly crunchy at first. After less then a day, even that has smoothed out.
Airflow is better then I expected. As MTL vaper, I find it tighter then I've become accustomed to, but comfortable. I took out the AFC screw and threw it in the parts bag. Flavor is terrific! I put a 26ga, 2.2mm, 1.2Ω build in it and have been vaping it at 20-24 Watts.
This version has the red o-rings, and it seems it has a slight sleep from the #16. It wasn't a problem all of last evening, but after it sat overnight, it weeped a small amount from one of the airholes when I tipped it back to take a vape on it this morning. I've since replaced that seal with an included spare to see if it helps.
I was wondering if someone could suggest a source for a reliable o-ring set for one of these? I think I'm really going to enjoy using this, but would like to replace the seals with some better quality ones.
I spent a few minutes taking it apart and re-assembling it to familiarize myself with it and get a grasp of how the "juice control" works. The threading on it for the most part is very smooth, with only the juice control ring feeling slightly crunchy at first. After less then a day, even that has smoothed out.
Airflow is better then I expected. As MTL vaper, I find it tighter then I've become accustomed to, but comfortable. I took out the AFC screw and threw it in the parts bag. Flavor is terrific! I put a 26ga, 2.2mm, 1.2Ω build in it and have been vaping it at 20-24 Watts.
This version has the red o-rings, and it seems it has a slight sleep from the #16. It wasn't a problem all of last evening, but after it sat overnight, it weeped a small amount from one of the airholes when I tipped it back to take a vape on it this morning. I've since replaced that seal with an included spare to see if it helps.
I was wondering if someone could suggest a source for a reliable o-ring set for one of these? I think I'm really going to enjoy using this, but would like to replace the seals with some better quality ones.
Just one...
It's all your fault. It's a Kayfun clone--how bad can it be? I hope it's better for a hopeless MTL tootle puffer like myself than my Lemo Drop.
I also just got two Erlkonigins nano (I love this forum
So very glad to hear Katya!!
I look forward to your thoughts on them.
On the K4, downloading a copy of the parts list is helpful.
Where did you get the Erlk nano?
The Erlk is flawless with a proper wick (fat shoulders, just a tad down channels) - check Q's Erlk thread.
Amazing pic by Cloud Hunter:
The Erlkönigin : PICTORIAL | Page 351 | E-Cigarette Forum
Truth! I put in another order on 5-12, it shipped 5-13 and was here on the 15th. Just outstanding!
- Status
