- Status
I cannot recommend Angelcigs. They state that they ship from the USA and show stock but when I ordered, they shipped from China. So I paid more and shipping on top of that for a no-name clone that probably won't be good and still have to wait 2 weeks. So annoying!
I ordered my 10 Tobeco's from Alibaba too. That was the lowest minimum order I found. I misunderstood them and shipping was 5-7 days (they shipped in 5 days) via DHL. Hopefully, I'll get them this week.
I ordered my 10 Tobeco's from Alibaba too. That was the lowest minimum order I found. I misunderstood them and shipping was 5-7 days (they shipped in 5 days) via DHL. Hopefully, I'll get them this week.
I knew somebody got a kf5 from 3f and already received it, it was steamer!I got this one SJMY Kayfun V5 Kayfun 5 Style RTA 22mm 4ml Silver Rebuildable Atomizer
It came a few days agoI really like this K-F V5, it has a lot more air flow than a V4, witch is fine for me. The build quality is quite good
I'm using it in TC
Big thumbs up for the V5
Yup sure was me
& you know what? I'm putting some miles on it!I'v filled it up 4 times since the day before yesterday
It's so effortless to fill, & the flavour is on point! Best K-F Yet
I've not had the best success with angel cigs. I ordered a dripper from them (long time ago) and it didn't have a 510 positive post screw. No spares. I emailed them, they gave me some stupid excuse. I had another order waiting to be filled and shipped (already paid for, expensive order) so I demanded either a replacement screw, replacement atty or a refund for the atty. If I didn't get a reply I would cancel my other order with them.
I ordered a aromamizer from them, they didn't lisy it as a clone until after I ordered it and it shipped. (aromamizer styled)
I got some squape reloaded clones that are milled wrong or out of spec somewhere that leak like a sieve, I don't think they seal properly.
Yeah, over all I'm not impressed with angel cigs. After 3 orders and 3 problems, I'll avoid them in the future I think.
I've been using KF4's for over a year almost exclusively and the KM3 seemed to address most of the issues but the smaller capacity was the biggest hurdle for me but the ease of filling helps a lot. The KF5 fixed that so I'm sure I'll like it. It looks like filling it is the same as the KM3, which is better than the KF4.Yup sure was me
I'v filled it up 4 times since the day before yesterday
It's so effortless to fill, & the flavour is on point! Best K-F Yet
I just got a notification from DHL and I should have my Tobecos on Tues
I also had a issue last year.
Ordered a atty that was supposed to include a BF pin.
They had me send a photo showing the wrong pin, that was included.
Sent the photo....silence...another e-mail...silence....week later I filed a PP dispute.
They got back to me within 1 hour of the filing, stating the pin was being shipped.
This might be a record but the Angelcigs version shipped from China on Thursday and came today. It bypassed customs in NYC. Weird.
The packaging is like the authentic and the atomizer comes with logos. The bottom seal was cut open but nothing seems to be missing. Machining is very clean and smooth. I took the atomizer apart completely and there were no metal shavings anywhere. Minimal machine oil when I cleaned it. The threads on the top cap (for filling) seems to be on the loose side but not really an issue when it's screwed down. There is no slop on the afc control like some have reported (on the authentic?). The tank has almost no wobble when the juice control is open. It does need to be turned 3 full turns to open the jc holes completely.
I put a 5 wrap, 2.5mm ID 316ss coil at .34Ω and it's vaping really nice. I thought the KM3 was quiet, this is absolutely silent and smooth. At position 1, it's a little more airy than the KM3 so it's a loose MTL draw but I don't mind it. The drip tip slightly bigger but not obnoxious like a Lemo 2 or Aromamizer. This is definitely a winner.
The packaging is like the authentic and the atomizer comes with logos. The bottom seal was cut open but nothing seems to be missing. Machining is very clean and smooth. I took the atomizer apart completely and there were no metal shavings anywhere. Minimal machine oil when I cleaned it. The threads on the top cap (for filling) seems to be on the loose side but not really an issue when it's screwed down. There is no slop on the afc control like some have reported (on the authentic?). The tank has almost no wobble when the juice control is open. It does need to be turned 3 full turns to open the jc holes completely.
I put a 5 wrap, 2.5mm ID 316ss coil at .34Ω and it's vaping really nice. I thought the KM3 was quiet, this is absolutely silent and smooth. At position 1, it's a little more airy than the KM3 so it's a loose MTL draw but I don't mind it. The drip tip slightly bigger but not obnoxious like a Lemo 2 or Aromamizer. This is definitely a winner.
I'm pleasantly surprised with the one I just got from Angelcigs. I didn't have high expectations because it was a no-name clone and I've not had good luck with these types of clones but this one is really good. The threads a very smooth, even the loose top nut. It might actually be a good thing as it needs to seal the chimney as well and the little amount of play centers it. I have some 90% VG juice and it has no problems keeping up. Can't wait to try out the Tobeco's.
Yup sure was me
I'v filled it up 4 times since the day before yesterday
It's so effortless to fill, & the flavour is on point! Best K-F Yet
How does it compare to the Squape X Dream? I saw Focal is having a group buy on the Squape X for $14.50 right now.
Cool man, keep us (me) posted!I've been using KF4's for over a year almost exclusively and the KM3 seemed to address most of the issues but the smaller capacity was the biggest hurdle for me but the ease of filling helps a lot. The KF5 fixed that so I'm sure I'll like it. It looks like filling it is the same as the KM3, which is better than the KF4.
I just got a notification from DHL and I should have my Tobecos on Tues
The X dream has a looser draw, the K-F has better flavour
& easy of uses. The K-F is just so easy.Easy to coil, easy to wick, easy to fill. Their both really good! IMO.
If I had to chose between them, I would want both of them
I would buy the most expensive X dream clone I could, My logic is maybe their using a better coating, thats why it cost more?
Maybe? It's slightly looser than the KM3 and KF4. I can see why people want the MTL kit for this but I kinda like it better than a tight draw. It takes some getting used to but now I can't vape a KFL+ type airflow. It might be worth getting used to it because the build deck and top fill is awesome. Worst case, get the authentic MTL kit.
Hah! The problem with that kit, for me, is that they went the wrong way--too tight; 1.6, 1.4 and 1.2 mm (or so)???? I want a 2.2-2.4 mm airport, like the K4 and the K3 mini...
I ordered a KF5 from FT on 6/15. Shipped 6/15 (I know, same day), and arrived and now sitting in ISC NY 6/20. USPS has a delivery date of Friday, 6/24, but as I live in NY they frequently arrive before the expected date. I'm looking forward to playing with it, and hope the draw is still tight enough, although a little more would still be fine.
If you're ok with the KF4 and/or KM3 wide open, you'll be fine with the KF5.Hah! The problem with that kit, for me, is that they went the wrong way--too tight; 1.6, 1.4 and 1.2 mm (or so)???? I want a 2.2-2.4 mm airport, like the K4 and the K3 mini...
Not the SXK version, right?
- Status
Similar threads
- Locked
