Attack of the (Kayfun V5) Clones!

[Shawn Hoefer]

Drip tips?

$4.46 316 Stainless Steel + POM Hybrid 510 Drip Tip Kit (18 Pieces) (16mm, Kit, 18 Pieces) at m.FastTech.com

Sent from my SAMSUNG-SM-N910A using Tapatalk

 

[magicmyst]

Drip tips?

$4.46 316 Stainless Steel + POM Hybrid 510 Drip Tip Kit (18 Pieces) (16mm, Kit, 18 Pieces) at m.FastTech.com

Nice- But will they fit the K5?

 

[nelsonm64]

Nice- But will they fit the K5?

99% sure

 

[Heartsdelight]

Strange, I put clapton coil in both of my tobeco's, and no problems with the screws on mine, got 1 SS and 1 black.

I got the black tobeco from Eciggity too & one of my screws were hard to unscrew I guess the were kind of rough & tight, but I got my Claptons in ok. It wasn't nice & smooth. It's ok if it bothers me I did get the original spares kit from Originvape.

 

[Heartsdelight]

Anyone found POM-inlay for mouthpiece in different colors? All I've found are these at 3F, but would prefer a blue and a green. The colors would be great for telling my K5s apart.

fasttech $4.46 316 Stainless Steel + POM Hybrid 510 Drip Tip Kit (18 Pieces) - detachable / 16mm at FastTech - Worldwide Free Shipping
You get one ss & one black base & 6 colors with spit guard screens & matching o rings. Great deal, I ordered. I also ordered a red Pom from 3f before I saw these. They're on their way.

 

[lsprn]

Anyone who wants tobeco clones ... eciggity has them now in stock. Kayfun v5 Clone by Tobeco

Out of stock now

My Reign Has Just Begun

 

[samuels]

Well, i liked the quality of the FT clone of a clone, i ordered another

 

[YoursTruli]

Legendgadget Flash Sale
Kayfun 5 by SXK 1:1 clone-$22.7 and Freeshipping|legendgadget.com
The kayfun 5 RTA Vape tank
This item is 1:1 clone by SXK
July 9th-10th (-0400GMT) $18.00
Only 20 sets available (now 17)
limit 1 per order
Freeshipping

 

[dwcraig1]

Well, i liked the quality of the FT clone of a clone, i ordered another

If I didn't know better I'd say SM was into making clones, hey maybe they are.....LOL

 

[samuels]

Or restock from China when they low on stock

 

[Heartsdelight]

Out of stock now

My Reign Has Just Begun

I heard they were going to restock.

 

[Stiksave]

Legendgadget Flash Sale
Kayfun 5 by SXK 1:1 clone-$22.7 and Freeshipping|legendgadget.com
The Kayfun 5 RTA Vape Tank
This item is 1:1 clone by SXK
July 9th-10th (-0400GMT) $18.00
Only 20 sets available (now 17)
limit 1 per order
Freeshipping

Thanks for the heads up on this deal, ordered 2.

 

[imzn]

I received SJMY KF5 from 3Fvape.
This KF5 is very high quality and work well.
Also, o-ring is good for air flow control system.
I recommend SJMY.

 

[dwcraig1]

This article now has me totally convinced that the SXK sold by FT is indeed SXK. The one in this article has the logo on the AC ring. It's the bag with the blue screwdriver that did it for me.
SXK Kayfun V5 Clone

 

[nelsonm64]

i'll be going to pick up my FT SXK when the post office opens in a couple hours all I really care about is the build quality and, that it has a 3mm air shaft! and from reports the SXK from ft is decent quality

 

[dhaiken]

i'll be going to pick up my FT SXK when the post office opens in a couple hours all I really care about is the build quality and, that it has a 3mm air shaft! and from reports the SXK from ft is decent quality

I got one from Legend Gadget and it does have the 3mm air hole and the quality seemed on par w/the authentic.
So much so I ordered 2 more. And then a 4th one this morning because they went on sale for $18.00 w/free shipping.
I frequently order a clone of something I'm interested in but not sure about. That sometimes leads to purchasing 1 or more authentics; more clones; or none at all.
This round turned into 4 clones after comparing it to an authentic.
I figure I can still get an authentic for up to 2 years if I choose to.
However, I don't see why I would in this case other than as a courtesy to the originator, which I have done before.

 

[DP2Raja]

and from reports the SXK from ft is decent quality

I have the SXK from FT. A perfect little clone. Great vape. No leaks. Easy JFC running (just the right amount of tension) excellent machining on mine. You should be pleased.

 

[nelsonm64]

picked it up, and got it built... first was a 24g SS coil @ 0.3 with 3mm ID. that didn't go so well... dry hits, to thick of wick I think. second build was 2.5mm ID with 26g Kanthal @ 0.8, the wicking is much better! sofar though, i'm liking the vape better from of my KF V3 mini Plus 22mm. however, i'm going to be fair and save my final judgement until after ive had a few tanks though it! cheers guys.

Edit: damn it, still not wicking like it should....? juice channels are clear and clean, wick is fluffy (not tight) strange to say the least! i'm on a mission now!!!

 

[Cirus]

Finally, and RTA (Tobeco) that doesn't leak without loads of time and further modification. Flavor is better than I initially thought too, after opening the JFC another turn (from 2 to 3 -Max VG/slightly diluted).

 

[Shawn Hoefer]

I got one from Legend Gadget and it does have the 3mm air hole and the quality seemed on par w/the authentic.
So much so I ordered 2 more. And then a 4th one this morning because they went on sale for $18.00 w/free shipping.
I frequently order a clone of something I'm interested in but not sure about. That sometimes leads to purchasing 1 or more authentics; more clones; or none at all.
This round turned into 4 clones after comparing it to an authentic.
I figure I can still get an authentic for up to 2 years if I choose to.
However, I don't see why I would in this case other than as a courtesy to the originator, which I have done before.

How long was shipping?

Sent from my SAMSUNG-SM-N910A using Tapatalk