Authentic Svoemesto Kayfun Lite - 2019 & 2021 Version

[LAwaters]

Another FYI for everyone: We were told this morning by SVM that the serial number check on their website is not working properly. They are in touch with their developer and working to correct it.

No further info on the timing of Batch 2.

 

[AstroTurf]

Another FYI for everyone: We were told this morning by SVM that the serial number check on their website is not working properly. They are in touch with their developer and working to correct it.

No further info on the timing of Batch 2.

Do you still have some left?

 

[AstroTurf]

Do you still have some left?

Ner Mind... Ordered!

 

[Bronze]

I’ve ran into a few issues since singing the praises of this tank.

For some unknown reason when I take the tank section off the base to fill, and obviously having it in an inverted position, liquid seeps out through the drip tip. Can’t imagine how this is happening and I’ve changed o rings but still no difference. I’ve contacted SM to see if they can offer any assistance.

The next issue is when closing the tank up again after filling, liquid always gathers where the tank meets the base. Not a lot, but it’s still irritating and results in wet fingers from having to wipe it up.

And lastly, after vaping a while, if I take the tank off and look through the 510, there is a little liquid build up on the airflow screw. I know that is normal in most tanks but normally we can’t see it.

Still pleased to say I haven’t had any gurgling off this tank or a dry hit. It wicks really well but those niggling little things are pushing me back to the Prime.

I always end up with juice on my hands and on the atomizer with the Prime and Mini too. They tried minimizing this with the inward bevel on the Prime (versus a flat surface on the Mini) but juice still gets out. It's not major but there is a residue.

 

[Bronze]

Sorry guys, but I was left behind on the KFL2019 wave. I have to wait till stock is replenished...whenever that is. I had my say with the vendor, it's over.

 

[AstroTurf]

Sorry guys, but I was left behind on the KFL2019 wave. I have to wait till stock is replenished...whenever that is. I had my say with the vendor, it's over.

Hhv still has 24mm in stock...

 

[Bronze]

Hhv still has 24mm in stock...

That would look too dopey on my 22mm JAC DNA. I'm a little like HB in that the overhang would trigger my OCD.

 

[vapdivrr]

Sorry guys, but I was left behind on the KFL2019 wave. I have to wait till stock is replenished...whenever that is. I had my say with the vendor, it's over.

That's a bummer bro

Sent from my SM-G960U using Tapatalk

 

[jorisd1980]

Mine came in today. Unfortunately I'm having a cold so I'm not really allowed to say much about the flavor for now, which of course is non-existent in this condition. The size and the metal driptip makes it a bit of a hussar mini vape, without the condensation going on. For now it seems like a descent product, I'm happy I got it. It's nothing stellar for me though. That might change when my cold has left

Verstuurd vanaf mijn SM-G965F met Tapatalk

 

[RadiusNick]

could someone tell me if it's 24mm all along the tank and not just at the base,so it would slide into a mod like this(it is supposed to support 24mm attys,but I'm not sure how much room it has to spare):

 

[marshbunny]

The drip tip does get very warm, I used tip from ammitt mtl, solved the problem. Also placed next to doggy for those that want to see difference in size. Both are on Tesla Punk 86W mod have had no problems so far, but have refilled only once.

 

[AstroTurf]

The drip tip does get very warm, I used tip from ammitt mtl, solved the problem. Also placed next to doggy for those that want to see difference in size. Both are on Tesla Punk 86W mod have had no problems so far, but have refilled only once.

Nice pic!!!

 

[marshbunny]

could someone tell me if it's 24mm all along the tank and not just at the base,so it would slide into a mod like this(it is supposed to support 24mm attys,but I'm not sure how much room it has to spare):
View attachment 800527

Yes, it is 24 over.

 

[MikeE3]

Sorry guys, but I was left behind on the KFL2019 wave. I have to wait till stock is replenished...whenever that is. I had my say with the vendor, it's over.

Well that's just not right from that vendor ... sorry you got caught up in it.

 

[Bronze]

Well that's just not right from that vendor ... sorry you got caught up in it.

Yeah, nuthin' I can do. I let them know exactly how I feel about it. Sadly, it was totally avoidable. Maybe this will inspire them to fix their system so this does not repeat. But for now, I'm out of the loop and can only sit back and enjoy the reviews coming in from you guys.

 

[AstroTurf]

Yeah, nuthin' I can do. I let them know exactly how I feel about it. Sadly, it was totally avoidable. Maybe this will inspire them to fix their system so this does not repeat. But for now, I'm out of the loop and can only sit back and enjoy the reviews coming in from you guys.

Oh, I Dunno...

You want me to ship you my yet unopened 22mm K19?

Jim

 

[Pinggolfer]

The drip tip does get very warm, I used tip from ammitt mtl, solved the problem. Also placed next to doggy for those that want to see difference in size. Both are on Tesla Punk 86W mod have had no problems so far, but have refilled only once.

great looking drip tip.

 

[Bronze]

Oh, I Dunno...

You want me to ship you my yet unopened 22mm K19?

Jim

Very nice offer! But I'm good. I can wait. The wave has passed, the thrill is gone, the damage was done, I had my say with the vendor, and I'm mellowed out now. I have accepted my lowly status as a Kayfun Prime vaper until KFL19's are replenished.



But once again, Turfie demonstrates what a fine gentleman he is. Sorry to wreck your image.

 

[AstroTurf]

Very nice offer! But I'm good. I can wait. The wave has passed, the thrill is gone, the damage was done, I had my say with the vendor, and I'm mellowed out now. I have accepted my lowly status as a Kayfun Prime vaper until KFL19's are replenished.



But once again, Turfie demonstrates what a fine gentleman he is. Sorry to wreck your image.

Hey no prob...

I'm still vaping my Mini V3?!?

Hang Tough, and if the wait becomes unbearable... Let me know.

 

[Bronze]

Hey no prob...

I'm still vaping my Mini V3?!?

Hang Tough, and if the wait becomes unbearable... Let me know.

Will do Turfie. Thanks again.

I'm using my Prime on my main squeeze, but use my KM3 on my living room Radius and my original KFL+ on my bedroom P2.5. And an Achilles RDA on my P2 when I'm in the mood for dripping. Some things live forever. And I still have a bunch of spare Kayfuns laying around including my very first KFL...the original with the rounded drip tip and no airflow adjustment. What fond memories!