Buzzin Away Chatter

BuzzKill · Oct 24, 2010

Well In theory a larger DIa. wire and a longer wire would have more surface area , so a long coil @ 3ohms would use a much larger wire dia. and would last a LONG time ! , I have not done nearly as much work in this area as you have KW so any advice is welcome.

I have the damn thing already designed LOL , it would use a coil/wick holder that plugs into a socket ( for easy replacement ) it would look very much like the bottle setup you have shown but refined.

I have some Nichrome wire around here and can get some larger stuff very easily , so a mock up would be fairly quick and easy to see if I am at all correct in my assumptions . What do you recommend for the WICK ???

I have seen some fireplace seal at Mcmaster-carr that looks good , the other thing is this coil could also be much larger in Dia. so the wick could be bigger also

kwcharlie · Oct 25, 2010

that's the problem THE WICK, we just figured out in the last week or two a wicking system could work as well as the GG AFS, when a E2's working good (seems to be ALL about wicking about working good) it's just as good as dripping that's why i say the wire/cup/mount is done., just reverse engineer that part of the E2.
Somehow something fireproof has to be combined with the micronetting used in PTB, I don't think PTB can take the heat. Everyone who has cut the E2 wick and put folded PTB from the cup into the juice has had great vaping, wicking problems over.

BuzzKill · Oct 25, 2010

WHat is PTB ?? brain dead

Email me please

kwcharlie · Oct 25, 2010

maybe the E2 wire di and length can be tuned up but it's what you wrap/lay it around that's the 64$ question now,

kwcharlie · Oct 25, 2010

PTB = Pyramid Tea Bag, it'ss a man made fiber cloth that nothing else has worked like but there is reference to getting it in sheets and what it's made of, I'll post it if i can find

Bovinia · Oct 25, 2010

Oooo the wizards are at work...I'm so excited!!

kwcharlie · Oct 25, 2010

BuzzKill said:
WHat is PTB ?? brain dead

Email me please

OK when i find the post of what it is, go to YouTube - DJbizzum's Channel and watch the one where badkolo put's his folded PTB in an E2, i havn't tried it but EVERYONE says it solves the wicking problem

nickf41680 · Oct 25, 2010

kwcharlie said:
OK when i find the post of what it is, go to YouTube - DJbizzum's Channel and watch the one where badkolo put's his folded PTB in an E2, i havn't tried it but EVERYONE says it solves the wicking problem

I can vouch it works perfect!! On a stock e2

On the bottle mod I don't blieve it is needed... Which leads me to blieve that the "wick" that is used in a e2 works well under the right conditions... With a wider bodied carto the wick material used which is silica if I'm not mistaken.. SHOULD perform well

kwcharlie · Oct 25, 2010

i aggree !00% but can't prove it nick, the PTB might be an piece to it going to market and not us hackers

nickf41680 · Oct 25, 2010

kwcharlie said:
i aggree !00% but can't prove it nick, the PTB might be an piece to it going to market and not us hackers

This is true... All I know is we NEED a wider carto

Hey mike check out the royal smoker tips and videos in the cartomizer section

BuzzKill · Oct 25, 2010

Well I am working on a ******* system, I think I can get it to work so it would self feed the coil ?? so that you would not rely on the wick to source all of the juice it would have 2 feeds this way.

I will look into that , thanks

nickf41680 · Oct 25, 2010

BuzzKill said:
Well I am working on a ******* system, I think I can get it to work so it would self feed the coil ?? so that you would not rely on the wick to source all of the juice it would have 2 feeds this way.

I will look into that , thanks

This sounds very interesting

I'm watching now )

BuzzKill · Oct 25, 2010

Hey send me a link to the cartomizer section !

kwcharlie · Oct 25, 2010

nickf41680 said:
I can vouch it works perfect!! On a stock e2

On the bottle mod I don't blieve it is needed... Which leads me to blieve that the "wick" that is used in a e2 works well under the right conditions... With a wider bodied carto the wick material used which is silica if I'm not mistaken.. SHOULD perform well

Ya Nick, i was about ready to do the badkolo PTB mod, working on balancing my drinking so my hands are steady enough, and Billy came up with the BOTTLE mod and so far I think it will work too, not there yet but will see, working with too small bottles I think, and they WORKED SO WELL, knew it was the way to go.
But that PTB stuff is SO GOOD, if mike is going to market with something I think it can be included in some kind of bottle he gets the Chinese to make for him. Do you know what the PTB’s are made of, I saw a post where someone found it in sheets.

kwcharlie · Oct 25, 2010

BuzzKill said:
Hey send me a link to the cartomizer section !

nickf41680 · Oct 25, 2010

kwcharlie said:
Ya Nick, i was about ready to do the badkolo PTB mod, working on balancing my drinking so my hands are steady enough, and Billy came up with the BOTTLE mod and so far I think it will work too, not there yet but will see, working with too small bottles I think, and they WORKED SO WELL, knew it was the way to go.
But that PTB stuff is SO GOOD, if mike is going to market with something I think it can be included in some kind of bottle he gets the Chinese to make for him. Do you know what the PTB’s are made of, I saw a post where someone found it in sheets.

I think it's somewhere in the mega e2 thread... Bc it wasn't possible for the Australians to get LPTB so someone said that they can order it... Not sure where it is... I think badkolo had tried to get the Chinese to add ptb to the carto and was denied... I'm not 100% sure though.... Damn mike u got the resources I guess... If. U need any help there are PLENTY of member here that have TONS of info and helpful hints to get this to work correctly

5cardstud · Oct 25, 2010

Mike, sounds like an excellent device. I wonder how long it will take some of the vendors to copy that idea?

kwcharlie · Oct 25, 2010

BuzzKill said:
Well I am working on a ******* system, I think I can get it to work so it would self feed the coil ?? so that you would not rely on the wick to source all of the juice it would have 2 feeds this way.

I will look into that , thanks

I know, but I dont think is just lack of CNC machines is the reason the Greek doesnt make his self feeding system, IMHO the concept is flawed, for sure its expensive and violates Ockham Razor and KISS. Wicking I think is just missing the right system

BuzzKill · Oct 25, 2010

I would think It would be immediate IF it worked !

I guess I would have to hermetically seal it with JB Weld LMAO !!

Thanks Nick ! I could use some help ( not a professor at this but I have the resources and desire IF the market is there and it appears to be )
email me sales@notcigs.com

salemgold · Oct 25, 2010

BuzzKill said:
Hey all , there is a review in the, well Reviewers section - !! , if you would like to add your input it would be very much appreciated !

You all know how this stuff works HYPE is everything in this business .

Just ask CHUCK !

BTW I need to find some kind of giveaway any ideas ?? M&m's LOL !!

I saw that review and wanted to add a post so badly but it is one of the areas that I have no access to as a supplier associate. I have been spreading the word to anyone and everyone that I talk to that the Buzz is a reliable and sturdy VV mod that I am very impressed with.

Buzzin Away Chatter

Unregistered Supplier

Ultra Member

Unregistered Supplier

Ultra Member

Ultra Member

Divine Bovine

Ultra Member

Super Member

Ultra Member

Super Member

Unregistered Supplier

Super Member

Unregistered Supplier

Ultra Member

Ultra Member

Super Member

ECF Guru

Ultra Member

Unregistered Supplier

ECF Guru

Similar threads

Users who are viewing this thread