Catfish Atty Mods the next Chapter

[WharfRat1976]

I actually made them with the TURBOwinder deluxe - it's a tool made by turbocad6 and he has a tutorial in the coil build section on how to make it. The one he made me is crazy bad ayuss - it's like Ti
View attachment 463320
However, Kuro and coil master both emailed me today asking me to review products. The coil master is version 1.3. I hope they took my suggestions into account and used a wider diameter "finger" so "normal" gauge wire like 29-26 can be formed more tightly to the rod and include a second set of rods for installing dual coils.

The TURBOwinder makes the best formed and tensioned coils I've ever wound because it uses those gripping nippers to tension the wire while squeezing it to the rod. It's beast

Vector $70 (+$6)

1. TheDigital99
2. Loopy1224
3. lutses
4. Robbieblood
5. Rule62
6. rudedog
7. AllPepperS
8. Chadshaw
9. Calpis
10.TheDigital99 (2nd)
11. Robbieblood (2nd)
12. Tbev
13. jhhollier
14. BENTHOS
15. distortoblotto
16. d4gger
17. Magaro
18. Rex Everything
19. Tbev (2nd)
20. fairtradesloth
21. fairtradesloth (2nd)
22. YePsTeR
23. Kingdal
24. Nautilusfan
25. Inspects
26. s_X_d
27. Wolfenstark
28. Papa_Lazarou
29. Papa_Lazarou (2nd)
30. tw33k
31. Wharfrat1976
32. pwheeler
33. petemoss
34. bullhcr
35. kiloyst
36. Alexander Mundy
37. Mantis4343
38. Magnetnerd
39. puffon
40. supersport13
41.TEEJUICE
42. NatGasMan
43. s_X_d
44. s_X_d
45.Motabrownie
46. cd68
47. distortoblotto (#2)
48. johnnyseeandoh
49. Asbestos 4004
50. Kentastic
51. s_X_d
52. JamezC
53. Raynman
54. RickCain
55.druckle
56.druckle
57. Magaro (#2)
58. Yiorgo
59. 73neb
60. freedogg
61. inspects
62. Sweepea
63. Alawot
64. inswva
65. dirfm
66. Kid Krinkle
67.keepsmiling
68. BosleyXVI
69. RuDawg7890.
70. Steven445.
71. Steven445
72. Steven445.
73. Steven445
74. Steven445
75. rinkusu
76. RSZ1
77. LittleBird

 

[WharfRat1976]

Vector $70 (+$6)

1. TheDigital99
2. Loopy1224
3. lutses
4. Robbieblood
5. Rule62
6. rudedog
7. AllPepperS
8. Chadshaw
9. Calpis
10.TheDigital99 (2nd)
11. Robbieblood (2nd)
12. Tbev
13. jhhollier
14. BENTHOS
15. distortoblotto
16. d4gger
17. Magaro
18. Rex Everything
19. Tbev (2nd)
20. fairtradesloth
21. fairtradesloth (2nd)
22. YePsTeR
23. Kingdal
24. Nautilusfan
25. Inspects
26. s_X_d
27. Wolfenstark
28. Papa_Lazarou
29. Papa_Lazarou (2nd)
30. tw33k
31. Wharfrat1976
32. pwheeler
33. petemoss
34. bullhcr
35. kiloyst
36. Alexander Mundy
37. Mantis4343
38. Magnetnerd
39. puffon
40. supersport13
41.TEEJUICE
42. NatGasMan
43. s_X_d
44. s_X_d
45.Motabrownie
46. cd68
47. distortoblotto (#2)
48. johnnyseeandoh
49. Asbestos 4004
50. Kentastic
51. s_X_d
52. JamezC
53. Raynman
54. RickCain
55.druckle
56.druckle
57. Magaro (#2)
58. Yiorgo
59. 73neb
60. freedogg
61. inspects
62. Sweepea
63. Alawot
64. inswva
65. dirfm
66. Kid Krinkle
67.keepsmiling
68. BosleyXVI
69. RuDawg7890.
70. Steven445.
71. Steven445
72. Steven445.
73. Steven445
74. Steven445
75. rinkusu
76. RSZ1
77. LittleBird

 

[ItTechy]

Atty3 List
1. TheDigital99
2. SteelGirl
3.distortoblotto
4. Robbieblood
5. Wolfenstark (Black)
6. Mommabird62 (Black)
7. petemoss
8.subohmies
9. Raynman (Black)
10. d4gger (Stainless)
11. d4gger (Black)
12. LittleBird (Black)
13. Steve Parry (Black)
14. ItTechy (Black)

(from page 54)

 

[ItTechy]

Last list for atty3 looks to be on page 54

I added myself to the list and copied and pasted it to a new post, same thread.

Will that do the trick?

 

[ItTechy]

I actually made them with the TURBOwinder deluxe - it's a tool made by turbocad6 and he has a tutorial in the coil build section on how to make it. The one he made me is crazy bad ayuss - it's like Ti
View attachment 463320
However, Kuro and coil master both emailed me today asking me to review products. The coil master is version 1.3. I hope they took my suggestions into account and used a wider diameter "finger" so "normal" gauge wire like 29-26 can be formed more tightly to the rod and include a second set of rods for installing dual coils.

The TURBOwinder makes the best formed and tensioned coils I've ever wound because it uses those gripping nippers to tension the wire while squeezing it to the rod. It's beast

And where does one get a TURBOwinder "o" guru of the coiling aparati...?

Hummm...Hummmm?

 

[tw33k]

"it's a tool made by turbocad6 and he has a tutorial in the coil build section on how to make it"

 

[ItTechy]

"it's a tool made by turbocad6 and he has a tutorial in the coil build section on how to make it"

Now that told me a lot!

So I'm to aimlessly search the ECF forums for this dOOd....

Okay I'll search...pffffffffff

I PM'd him...LOL!

 

[TheDigital99]

Now that told me a lot!

So I'm to aimlessly search the ECF forums for this dOOd....

Okay I'll search...pffffffffff

I PM'd him...LOL!

Quickly off topic... Here is the link to turbo's coiler

How To Build The Turbo Coil Winder | E-Cigarette Forum

Sent from my Nexus 9 using Tapatalk

 

[Sloth Tonight]

Morning freaks.. hope the vectors come in today. Busy day but not as busy as tomorrow and I simply cannot wait to slap in some coals

Off topic but I'm on a wood polishing frenzy. Started with the woodvil.translated to everything wooden in my house. The house looks stunning and ready for fresh vectorious vapor to roll across the wooden surfaces like mist across the lake on a 20 degree summer morning.

 

[pwheeler]

My vector will be here today! Can't wait to coil her up and give it a go.

Morning freaks.. hope the vectors come in today. Busy day but not as busy as tomorrow and I simply cannot wait to slap in some coals

Off topic but I'm on a wood polishing frenzy. Started with the woodvil.translated to everything wooden in my house. The house looks stunning and ready for fresh vectorious vapor to roll across the wooden surfaces like mist across the lake on a 20 degree summer morning.

Wow, you are really poetic in the mornings! . That brings wood polishing to a whole new level!

 

[MFToms59]

For a NET and 50 mL that is astounding

Which net tho?

30mls RBFS St. James & 20mls GoodeJuice Natural Perique, through a Hemp Fiber wick.

 

[MFToms59]

Macho points for vaping on that thing. At 0.16 ohms I'm pretty sure it would kill me.

Still, really impressive for 50mls. When I get my CAM-M I may have to give it a try for a day or two.

Spaced coils are key when vaping NET juices, seems to slow gunking. My DIY NETs need dry-burn after ~20mls, still better than the daily burn I needed on contact coils.

Russ, I like my DIY Cigars nothing tastes better than an Isa Del Sol in the morning. I also enjoy flavorless @~14-16mg, really nice kick when bottom-feeding, also gives the taste-buds a little down time, variety isn't a bad thing at all.

 

[freedogg]

One of the everyday drivers dedicated to the sacred vapor. ( Nicoticket Wakonda) 2mm twisted triple 32's built to 0.7 ohms...

No need to feel for me bro. I personally think manufactured cigs tasted like garbage and unflavored nic just the same - awful. But I don't feel for you...

Flavor is at least 75% of the pure enjoyment I get from vaping. Cool that it's not a factor for you, I respect that. But I hope my point is taken without offense

I'm sure you guys already know...but jik...our "sacred juice" is 50% off today.

Back on topic....Vector should arrive today...bought it for T-mod but that won't be here for another week or 2. I'll prob build the Vector and put it on a new Woodvil till Zombie girl T-mod gets here.

 

[Magaro]

Spaced coils are key when vaping NET juices, seems to slow gunking. My DIY NETs need dry-burn after ~20mls, still better than the daily burn I needed on contact coils.

This makes a lot of sense. Gonna try a pair of spaced coils tonight. Thanks.

 

[Sloth Tonight]

I'm sure you guys already know...but jik...our "sacred juice" is 50% off today.

Back on topic....Vector should arrive today...bought it for T-mod but that won't be here for another week or 2. I'll prob build the Vector and put it on a new Woodvil till Zombie girl T-mod gets here.

I do know but I got a liter already...gonna grab a bit of cure though. Thanks for the heads up. Fresh juice for vector

 

[RuDawg7890]

I do know but I got a liter already...gonna grab a bit of cure though. Thanks for the heads up. Fresh juice for vector

Don't forget about Strike, man! Grabbed 4 myself (plus some Cure)

On topic...USPS says my Vector comes today, trying not to geek out and make this day drag on!

 

[Sloth Tonight]

Don't forget about Strike, man! Grabbed 4 myself (plus some Cure)

On topic...USPS says my Vector comes today, trying not to geek out and make this day drag on!

I did forget bro but remembered at the last minute...order up stoked!!

Can't check the my usps thing because my zipcode won't work with it. But I feel it in my bones. The V's are coming...(although it wouldn't surprise me if they come tomorrow instead - I'm out there, a ways)

 

[RuDawg7890]

I did forget bro but remembered at the last minute...order up stoked!!

Can't check the my usps thing because my zipcode won't work with it. But I feel it in my bones. The V's are coming...(although it wouldn't surprise me if they come tomorrow instead - I'm out there, a ways)

Awesome.

The USPS thing doesn't always work well anyway. Sometimes I don't get notifications until it's already been delivered! It did work for my Vector though. You probably paid for yours before I did, so I'm guessing your feelings are correct!

 

[Sloth Tonight]

Awesome.

The USPS thing doesn't always work well anyway. Sometimes I don't get notifications until it's already been delivered! It did work for my Vector though. You probably paid for yours before I did, so I'm guessing your feelings are correct!

I paid early Tues morning but I'm out there...the closest real city to me is Montreal, and that's still about 2 hours away x.x

 

[Chowderhead1972]

Morning freaks.. hope the vectors come in today. Busy day but not as busy as tomorrow and I simply cannot wait to slap in some coals

Off topic but I'm on a wood polishing frenzy. Started with the woodvil.translated to everything wooden in my house. The house looks stunning and ready for fresh vectorious vapor to roll across the wooden surfaces like mist across the lake on a 20 degree summer morning.

Let me get this straight..... You have gone from milking nuts to polishing the wood? What's next? Punching the clown?