WOW again. How does this tiny thing produce such plumes of flavor! I mean a lot of vapor!
Show us ... We do not know! [emoji6]
Chalice - MarkBugs Bottom Feeder Atomiser - Official thread
- Thread starter mark78
- Start date
- th_trl_thread_readers 0
- Status
Show us ... We do not know! [emoji6]
The forum has gone kookoo. On another thread it shows that someone quoted something I said nearly two hours before I even posted it..
Hello Mark,
Not sure if this has been asked before but I figured I'll go that route with you. So, I love the wae2, the older models look amazing too. The Gem? we don't need to talk about it, looks stunning. Chalice 1-3? incredible. One thing is left, when will we fan boys of yours see the first mark bugs bottom fed mod?
Not trying to put you on the spot in front of all of us but I kinda do lol. We want Squonkers, we want Squonkers!
Not sure if this has been asked before but I figured I'll go that route with you. So, I love the wae2, the older models look amazing too. The Gem? we don't need to talk about it, looks stunning. Chalice 1-3? incredible. One thing is left, when will we fan boys of yours see the first mark bugs bottom fed mod?
Not trying to put you on the spot in front of all of us but I kinda do lol. We want Squonkers, we want Squonkers!
The forum has gone kookoo. On another thread it shows that someone quoted something I said nearly two hours before I even posted it..
I tried to send pms earlier and when I clicked "send" it says "please wait 30sec before you send another message. Try again in 30026 seconds" Not sure if it was 3000 or 30000 but I figured it's time for a coffee this is going to take a while.
man this is the first post I've seen in a long time that I wished I could give 10 likes to, an MBBF would be incredible... titanium of course, ok not of course but one can hope
, evolved no doubt... I just sent the amount wanted and my country to MBBF1@markbugs.com to get on the list for that 
man this is the first post I've seen in a long time that I wished I could give 10 likes to, an MBBF would be incredible... titanium of course, ok not of course but one can hope
While we are at it, here is a wish list for MB ingenuity
- Time to ditch the plastic bottle and come up with a design that utilize a steel tank for squonking. Steel juice bottle like U-can is a good example of how this might be possible. Still not an easy task but if anyone can pull it off, it would be MB team.
- Hybrid option for Chalice (First ever hybrid BF mod)
- DNA BF Mod (of course!)
- Design that combines Reo's easy of use, simplicity of pdib, and smooth curve of Flask.
and here I am only asking for titanium
the kind of R&D required to re engineer the whole bottle feeder concept from a soft bottle to a new revolutionary rigid tank and perfect it before delivery to the masses is a whole lot to ask for but man someones gotta do it some day
it wouldn't be the first, hybrid atty bottom feeders have already been built... nothing commercially available though. I agree that would be the ultimate but might also limit the market for the mod somewhat... I could imagine many being turned off to not being able to use any of there atties on it. personally I'd def love it as a hybrid integrated chalice type design
the kind of R&D required to re engineer the whole bottle feeder concept from a soft bottle to a new revolutionary rigid tank and perfect it before delivery to the masses is a whole lot to ask for but man someones gotta do it some day
it wouldn't be the first, hybrid atty bottom feeders have already been built... nothing commercially available though. I agree that would be the ultimate but might also limit the market for the mod somewhat... I could imagine many being turned off to not being able to use any of there atties on it. personally I'd def love it as a hybrid integrated chalice type design
All I am saying is that since I mentioned it and turbo having the email address to the project we both get first dibs on the list. Just saying lol
yeah it was, I was on the list for the next batch to ship when they pulled the plug.You mean like he eclipse Mod? Wasn't that the name
Or that thing? Fail
lol ouch! Probably for the better. The idea was of course great but the project was probably the biggest fail in the vape industry. Feel super bad for those guys. I think they lost a big chunk of money.
Set up my Chalice II for the first time today and first Z coil. Making the Z coil was easier than I thought, except I could not get my ohms down where I wanted. Ended up at 1.3Ω which is quite a bit higher than I wanted so need to figure out what's up with that. Any tips is appreciated. I have 28 & 30g KA1 and either a 16 or 18 Luer to wrap on.
Vape wise..NOTHING like it. I love how it's more quiet, not airy, warm vape and the tapered chamber compacts the vape flow so I don't feel like I'm choking like with big atties. I LOVE this thing and hoping I can get the ohms down to where I like it. And very excited to get the Chalice III to play around with that one.
OH...and I need a small Philips screw driver cuz using my hubs collar metal thing isn't that easy.
My smallest Phillips screw driver wasn't small enough.
Vape wise..NOTHING like it. I love how it's more quiet, not airy, warm vape and the tapered chamber compacts the vape flow so I don't feel like I'm choking like with big atties. I LOVE this thing and hoping I can get the ohms down to where I like it. And very excited to get the Chalice III to play around with that one.
OH...and I need a small Philips screw driver cuz using my hubs collar metal thing isn't that easy.
My smallest Phillips screw driver wasn't small enough.
I got this at lowes Shop Kobalt 18-Piece 5-in Multi-Bit Screwdriver at Lowes.com
Works great the plastic bit holder slides off.
Post a pic of your coil. the length of the legs adds to the ohms of the coil, moving the coil below slightly counter clockwise would shorten both legs and reduce the ohms of the coil.
Works great the plastic bit holder slides off.
Post a pic of your coil. the length of the legs adds to the ohms of the coil, moving the coil below slightly counter clockwise would shorten both legs and reduce the ohms of the coil.
I got this at lowes Shop Kobalt 18-Piece 5-in Multi-Bit Screwdriver at Lowes.com
Works great the plastic bit holder slides off.
Post a pic of your coil. the length of the legs adds to the ohms of the coil, moving the coil below slightly counter clockwise would shorten both legs and reduce the ohms of the coil.
That's the screw driver to have! And I posted pics..but wrong thread
I put it on the other Chalice thread. DUH. They didn't come out too good anyway. But....did add to my sig line so you can say, I'm sold on this atty!!!!!!!
Tighten your screws they seem to be sticking out much higher than mine and use the 28 ga for sure. I use 28 or 29 ga.
I wanted to buy 29g but RTD didn't have any that I saw. Going to buy that next. Ok...broken record here but this is for sure my fav BF atty. even wrong ohms, untightened screws and a wonky looking long leg, it's vaping awesome
I got this at lowes Shop Kobalt 18-Piece 5-in Multi-Bit Screwdriver at Lowes.com
Works great the plastic bit holder slides off.
Post a pic of your coil. the length of the legs adds to the ohms of the coil, moving the coil below slightly counter clockwise would shorten both legs and reduce the ohms of the coil.
so now you do z coils? how is that working for ya?
- Status
Similar threads
