Makes sense, thanks for the heads up. I haven't received mine yet but see the stickers in the pictures. Thought they were to show authenticity but since its a clone that wouldn't add up.
Sent from my HTCONE using Tapatalk
- Status
Makes sense, thanks for the heads up. I haven't received mine yet but see the stickers in the pictures. Thought they were to show authenticity but since its a clone that wouldn't add up.
Sent from my HTCONE using Tapatalk
mine doesn't have machine marks. i was in the first batch that shipped.
Sorry I didn't skim through all the pages, but did anyone ever have their screen just randomly light up?
My mod was just sitting there for like 5minutes, and suddenly the screen lit up. Kinda scared of it randomly firing or something like that now.
My mod was just sitting there for like 5minutes, and suddenly the screen lit up. Kinda scared of it randomly firing or something like that now.
Use it and see how it holds up , it if goes bad somehow and it's still under warranty just have it replaced and if it's out of warranty who cares so you can take those tamper proof stickers off and replace the board.
From my personal experience I'd advise if you start having ANY wierd issues like check atty when you know atty is good, random lock up or whatever send an email to your vender and get it replaced asap. It will only get worse, even if you think it stopped doing it for a few days.
I took mine apart while still on warranty (I know, my bad) and found rebuilding these takes more than just a new chip. The way they epoxy the internals all together leaves you with pretty much a bare metal box for rebuilding. That means new plexi-windows, buttons, charge unit and might as well get a good 510 socket in there while at it. Just an fyi.
While I contemplate when I'll rebuild it -probably when dna30 chips are $30, I've ordered the new clone from Fasttech that comes with an 18650. I'm hoping lightning doesn't strike twice..
I took mine apart while still on warranty (I know, my bad) and found rebuilding these takes more than just a new chip. The way they epoxy the internals all together leaves you with pretty much a bare metal box for rebuilding. That means new plexi-windows, buttons, charge unit and might as well get a good 510 socket in there while at it. Just an fyi.
While I contemplate when I'll rebuild it -probably when dna30 chips are $30, I've ordered the new clone from Fasttech that comes with an 18650. I'm hoping lightning doesn't strike twice..
I have seen that issue reported by several people. I wouldn't wait for it to get worse, I would contact the vendor for a replacement since that is not normal.
just got it today, diddn't even clean it yet as you can see....built the Zenith to 0.76 and fired her up, really nice at 22.5 watts with some of my DIY "Creamy Beach"
[/IMG]
how do i flip the screen?
how do i flip the screen?
This is normal for the clone mines done it from day one, been a month no further issues. No firing by itself
So I just got my new green buddy in the mail Thursday. I've been vapeing it with various attys including a .5 ohm authentic kraken, a 1.2 ohm authentic kayfun, a 2ohm coil kanger aerotank, and a 1 ohm authentic russian 91%. I have had no issues. I also noticed it has the 'new' smaller positive 510 post. It also seems to have a newer firmware version as it doesn't need to have the button pressed to wake it up from sleep mode before it fires the atty. I've had only one battery in It so far (sony vct3) and have charged it to full multiple times from the built in charge port. All looks well so far. I haven't done any extensive voltage tests, but it seems to be functioning ok thus far. Hope it holds up. In case anyone is wondering, I got mine from elev8vape. I ordered mine just about one month ago, but it looks like the green were harder to come by.
just got it today, diddn't even clean it yet as you can see....built the Zenith to 0.76 and fired her up, really nice at 22.5 watts with some of my DIY "Creamy Beach"
[/IMG]
how do i flip the screen?
1 Click the fire button 5 times to lock it.
2 Hold the fire button and wattage up button until desired setting appears.
3 Click 5 times to unlock
Sent from my iPhone using Tapatalk
Got my Cloupor dna clone today and can't put it down.
Running a rsst with ss rope ecowool sleeve with 3 wraps ribbon wire 0.8ohms at 25 watts.
Plus sony vtc5.
Fluidvapes for 70 bucks with 5% coupon code. Wiped shipping off with discount.
Running a rsst with ss rope ecowool sleeve with 3 wraps ribbon wire 0.8ohms at 25 watts.
Plus sony vtc5.
Fluidvapes for 70 bucks with 5% coupon code. Wiped shipping off with discount.
My new box courtesy of Vix Vapes in San Clemente CA. Pictured next to a pint of beer for size comparison. The size is perfect IMO. Much smaller than I expected. Hits like a truck. The Stingray is in the drawer.
Sent from my GT-N7105 using Tapatalk
Sent from my GT-N7105 using Tapatalk
Fluidvapes shipped in 2 days and works like advertised and came in perfect condition. I paid for 2 day shipping as well. Total with coupon was 71 bucks.
Use code "Pegasus" to get 5% off.
Vape Shopping With Peg - Episode 4 Fluid Vapes - YouTube
Use code "Pegasus" to get 5% off.
Vape Shopping With Peg - Episode 4 Fluid Vapes - YouTube
Awsome good to know i am most likely ordering from here
Sent from my iPhone using Tapatalk
my experience has been that fluid vapes is a reliable dealer for any mod they carry. never have had a problem or issue. i guess nothing is perfect but they sure have been to me so far.....just got the sigelei 30watt deliverd quickly and exactly as described. other items before that,also, so relax and pull the trigger for whatever you are looking at.....
Awsome, i apreciate the feedback they have great prices
i think ill go for it[emoji2][emoji2]Sent from my iPhone using Tapatalk
Did anyone get one with the Hana Logo? I bought mine from a local Kansas City Vape Shop and it has the Hana logo on it. It vapes really well, gotta love 30 watts. but
- Status
Similar threads
