- Status
the Nimbus for the price cannot be beat, yep it has a small deck to work with but the small chamber gives you a pronounced great flavor and once drilled out to 1/16th or better is an awesome little rda that can also handle the heat with single or dual builds.
rite now i'm using a Helios with a 1.2 single coil build on my Cloupor @ 12.5 watts, hits like a freight train with pretty good flavor....using a NCR18650B when not subbing and getting great battery life 1 1/2 days at least.
also have the APO/Zenith/Tobh/Trident clones and it's a toss-up at sub-ohm level, there all great RDA's i don't believe you could go wrong with any one of them.
rite now i'm using a Helios with a 1.2 single coil build on my Cloupor @ 12.5 watts, hits like a freight train with pretty good flavor....using a NCR18650B when not subbing and getting great battery life 1 1/2 days at least.
also have the APO/Zenith/Tobh/Trident clones and it's a toss-up at sub-ohm level, there all great RDA's i don't believe you could go wrong with any one of them.
Last edited:
Just got my 3rd clone yesterday. A Blue from Elev8.
I also have a Silver from Wet Vapes and a Green from Vapor Tek. None have given me any problems at all. The only bug is the click twice issue that can be annoying, but isn't worth $180 (an an unknown wait time) to correct.
I also have a Silver from Wet Vapes and a Green from Vapor Tek. None have given me any problems at all. The only bug is the click twice issue that can be annoying, but isn't worth $180 (an an unknown wait time) to correct.
101 Vapes 2 weeks going strong new updated 510 fires first click out of sleep
Occasional drop in volts -1 other than that it's solid
Jwrap clear carbon fiber fits good
Attachments
Last edited:
Looks sweet!! I'm getting the drop in watts too and twice it dropped me down to the lowest setting of 7 watts and wouldnt go back up until waiting a while or re-seating the battery. Looks like version 4 will have to tackle that fix!
Looks nice. I can't decide between the clear carbon fiber or the blue carbon fiber for my Blue Cana.
What made you decide on the clear?
Hey Steve let me ask you....I ordered 2 JWraps and installed one a couple of days ago......the top, bottom and back cover fit Perfect....the big piece that covers the frons sides and little flap in the back fit great on the front and the side with the buttons, but on the opposite side where there is no buttons it was 1/4-1/2 inch short.....did you encounter the same problem? I did order the correct wrap for the clone....
I figured it was such a nice shade of blue on the Cana I stuck with the clear wrap
to expose it
The one I ordered from J Wraps was for the Cana clone V3, it fits really good
except on the back battery cover where it's a bit wide might be a problem removing the battery
cover. I just leave it in and charge it with USB. I didn't have that problem you should contact them
And I'm sure the will send you out a replacement
Last edited:
Thanks mam, I already did and they are sending me a replacement, I was just wondering, maybe they just sent out the wrong one, cause the original Hana is a bit smaller in diameter. Well see when I get the replacement, BTW your looks SICK!!!
Thanks your probably right about sending you the wrong one, heard their customer service is top notch. GL with
The replacement wrap
The replacement wrap
Just took the jump and ordered a red Cana from Fulid Vapes. Can I post here yet, or do I have to wait until I have device in hand? 
I just got mine in from Illvapes. After canceling my order when the lawsuit came up and waiting a month for my refund, I finally got a call from someone from Illvapes asking if I still wanted the device. I said yes, but they didn't have the silver I originally wanted, so I went with the blue. The device itself is working great. I rebuilt my Fogger V4 with dual 28 gauge (10 wraps) with cotton wick and it's sitting at 0.9-1.0 ohm. I have it wicked with cotton. I'm loving it so far.
Somethings I noticed:
1. Doesn't say Hana Modz during boot up like it did in Rip Trippers video and no mention of Hana Modz anywhere (for obvious reasons)
2. I don't have to click twice for it to fire from sleep mode. Woke up this morning and clicked the fire button and it was going. Not sure if this is a software upgrade or what.
3. I have to be very careful at how long I hold the fire button with my current build at anything over 20W. I thought with the 28 gauge and the number of wraps that it would take some time to heat up the coils so I would be able to keep it going longer, but if I hold it for more than 1-2 seconds per hit, I will start to get an almost dry burn taste. Kind of like what it tastes like right before you need to refill your RDA. When I get this hit (usually after 3 consecutive hits), I have to let it sit for a little bit before I fire it up again. It may be that my build isn't that great and at the higher wattage, it's exposing it seeing as I've never gone about 15W on my Provari until now. Any suggestions/fixes would be greatly appreciated. I have 28 gauge and 30 gauge wire, so I was thinking maybe a twisted 30 gauge may help slow down the heat up process.
Somethings I noticed:
1. Doesn't say Hana Modz during boot up like it did in Rip Trippers video and no mention of Hana Modz anywhere (for obvious reasons)
2. I don't have to click twice for it to fire from sleep mode. Woke up this morning and clicked the fire button and it was going. Not sure if this is a software upgrade or what.
3. I have to be very careful at how long I hold the fire button with my current build at anything over 20W. I thought with the 28 gauge and the number of wraps that it would take some time to heat up the coils so I would be able to keep it going longer, but if I hold it for more than 1-2 seconds per hit, I will start to get an almost dry burn taste. Kind of like what it tastes like right before you need to refill your RDA. When I get this hit (usually after 3 consecutive hits), I have to let it sit for a little bit before I fire it up again. It may be that my build isn't that great and at the higher wattage, it's exposing it seeing as I've never gone about 15W on my Provari until now. Any suggestions/fixes would be greatly appreciated. I have 28 gauge and 30 gauge wire, so I was thinking maybe a twisted 30 gauge may help slow down the heat up process.
Last edited:
Whatever amount you were wicking before wick more now on your builds, I had the same issue at the beginning with my kayfuns and now it is right on point, all my builds are 1.1-1.5 and I vape at around 15-16 watts and no dry hits at, can hit the fire button for 5 seconds with no problems....
Thanks Iceclouds, but I don't want to put too much wick right? I don't want to end up choking the coil and juice feed. I think at 15-16 watts, I'll be fine with my build. It's when I go up to higher watts that I get some dry hits.
You can try shorter wicks. If using a Kay fun 20w is a bit much anyway
I'm actually using a Fogger V4. The build is a little different, but I'm curious why you say 20W is a bit much for a Kayfun? Wouldn't the coild/build dictate what it can and can't handle along with a person's preference?
- Status
Similar threads
