Coil Master ?

[jifjifjif]

Loving mine, brutha. 7 wraps of 24ga Kanthal on the 2.5mm mandrel gave me .54 ohmages. Wicked her up with 3mm readyXwick and BOOM!

Thanks again, Winst....uh, I mean Russ.

 

[Alawot]

Thanks Russ for the giveaway and looking out for your fellow ecf'ers!

 

[SteamStack]

Glad to see you guys finally moving on up to a 2.5mm coil! Liken it much huh? It's what I've been rocking for awhile now.

 

[SteamStack]

Oh crap.. where's my head? I've got me a coilmaster v3 Thanks to super x as well!

Thanx bro!

 

[SteamStack]

Loving mine, brutha. 7 wraps of 24ga Kanthal on the 2.5mm mandrel gave me .54 ohmages. Wicked her up with 3mm readyXwick and BOOM!

Thanks again, Winst....uh, I mean Russ.

View attachment 472185 View attachment 472186

Nice lookin coil there and nice bend in the leg like a pro!

 

[jifjifjif]

Nice lookin coil there and nice bend in the leg like a pro!

Thanks! I put that bend in the leg after I mounted the coil in the atty. I just used the mandrel and pushed the wire into that shape.

 

[SteamStack]

Thanks! I put that bend in the leg after I mounted the coil in the atty. I just used the mandrel and pushed the wire into that shape.

Ah.. you cheated!






Lol.. I done that alot as well haha

 

[SUPER K]

Crap...

 

[xxbodkinxx]

Might have to get one of these!

 

[SteamStack]

Did you day tripple 30 gauge twist? Dang.. that's new to me. Might have to try me some tripple twist.

 

[Debadoo]

Russ, thanks so much, so glad I got one, cuz no way could I have bought it, hope to get the shipping label done tomorrow.

Jiff, need a vid of your building and mounting coils now!

 

[dbrandt01]

So, I'll be honest never believed in the hype with these things. Not much of a learning curve with them, and I might do a video in a couple hours of it for a small review. Really isn't a way to put it through it's paces to see how well it works haha. Made 4 coils, two 28g, two 26g coils and worked flawless each time. Now seeing pictures, I got careless on pulling out the starter wrap, but it was a trial run of it. It's so easy I got my dad to do one which is saying a lot haha. If it wasn't for the giveaway Russ did, I wouldn't have tried these. It was worth the $5 to get this and try one. I only see one complait, but I'm gonna wipe the threading out and see if it eliminates the squeaking of it.

 

[super_X_drifter]

So, I'll be honest never believed in the hype with these things. Not much of a learning curve with them, and I might do a video in a couple hours of it for a small review. Really isn't a way to put it through it's paces to see how well it works haha. Made 4 coils, two 28g, two 26g coils and worked flawless each time. Now seeing pictures, I got careless on pulling out the starter wrap, but it was a trial run of it. It's so easy I got my dad to do one which is saying a lot haha. If it wasn't for the giveaway Russ did, I wouldn't have tried these. It was worth the $5 to get this and try one. I only see one complait, but I'm gonna wipe the threading out and see if it eliminates the squeaking of it.

One of the lucky 4 to get black glad you won one Danny

 

[dbrandt01]

One of the lucky 4 to get black glad you won one Danny

Thank you, it was like Christmas opening it up with figuring out what color it would be. Can say I finally won of your many giveaways haha

 

[Debadoo]

Can't wait to get mine.....hope it's blue, but it doesn't really matter, will just be thrilled to have one with marked rods and caps!

 

[puffon]

Russ, We need to put the pressure on them for V4

2 sets of rods for dual coils
Radius the ends of the rods, to make it easier putting them back in the coils

or you could have the SuperX coiler produced
Then you could buy that Ferrari!.............

 

[super_X_drifter]

I actually discussed what I believe what a serious rebuilder would like to see in the DIY kit with them. I suggested a high end "super_X" edition with high quality USA made tools and a zip open lay flat style bag with pockets rather than that foam. Yes, I have also suggested a second set of rods.

In other news, another company sent me a similar style coiler to review. I have already used it and it has pluses and minuses compared to the coil master. Each has its strong(er) points

 

[SteamStack]

They make more money if ya buy 2 so it may not seem worth it to them.

Besides.. if ya bought version 1 or 2 then your all set. Unless you need that 4mm rod! Haha

 

[Debadoo]

Besides.. if ya bought version 1 or 2 then your all set. Unless you need that 4mm rod! Haha

yeah will definitely be using my original V1 rods as a second mounting rod.

 

[Train2]

This just went camping with me. A slapped together sorta minimalist
building kit, lol.
Never took the kit out, cuz my Reo was just vaping lovely the whole time, but it was good to know I had it if needed.