- Status
Hey Alchemy, welcome aboard and I hope you like your tank.
Lexi, I purchased a ProTank and it appears to me that the glass is glued in which would prevent me from even considering using it let alone trying to make glass for it. I saw something on a ProTank 2 that appeared to have a removable tank, if I get a chance to pick one up I will check it out to see if it viable for us to provide replacement glass. From the pictures I have seen though it looks like they have shaped the glass with some indentations on the ends. All of our glass is currently cold worked so if it requires any shaped features then it probably wont happen from us.
Lexi, I purchased a ProTank and it appears to me that the glass is glued in which would prevent me from even considering using it let alone trying to make glass for it. I saw something on a ProTank 2 that appeared to have a removable tank, if I get a chance to pick one up I will check it out to see if it viable for us to provide replacement glass. From the pictures I have seen though it looks like they have shaped the glass with some indentations on the ends. All of our glass is currently cold worked so if it requires any shaped features then it probably wont happen from us.
Just put the punched/flanged Halfling cartomizers up on the site. Been using them for over a week now and had been quite happy with them though yesterday it seemed to drop off so I put a fresh on in. This is probably around 25mls of eliquid through it so I think it was right on par time wise for a change.
To me these seem a bit warmer vape than the standard and XL SmokTech cartomizers and I have to say I like that. Flavor and vapor have been everything I like about the Smoks.
We got in 10000 of the custom flat washers for the Tiny Tank last week and should have the first test parts for fit and finish on the Tiny Tank (15mm OD) later this week. I also have a couple cases of Glass coming for making these tubes. If the Anodized parts come in soon enough we should be able to get these up on the site before VapeFest, if not then it should be shortly after our return but we have been promised that we will have the parts in time to take to Vegas with us for a debut there.
To me these seem a bit warmer vape than the standard and XL SmokTech cartomizers and I have to say I like that. Flavor and vapor have been everything I like about the Smoks.
We got in 10000 of the custom flat washers for the Tiny Tank last week and should have the first test parts for fit and finish on the Tiny Tank (15mm OD) later this week. I also have a couple cases of Glass coming for making these tubes. If the Anodized parts come in soon enough we should be able to get these up on the site before VapeFest, if not then it should be shortly after our return but we have been promised that we will have the parts in time to take to Vegas with us for a debut there.
Hey OCD I got my Ibtank not even 24 hours after ordering (probably a record). Problem is I can't use it because i'm fresh out of cartomizers Doh. I'll just have to wait for Tuesday. Happy Labor day folks!
That sounds like a record to me. Short of me delivering one to a customer in short driving distance I think it should stand for awhile
will your ibtipsy drip tips cover an xl carto in a standard tank. i noticed it said it recess under the bottom flare.
Sorry Pete, thats a 10mm difference or about 0.40" (nearly half an inch). The recess will make up for about 0.06" or about a mm and a half.
Nezzy, just put them back up. We got in Black, Blue, Green and Red today. Should be getting more inventory on the rest of the colors in the next week or so. We also have stock coming on the 19 anodized caps to boost those numbers back up and get the few that are sold out in those back in stock. 300 sets of the Black 22s so hopefully you get yours
Seems things are on track for the Tiny Tank, will have the first non anodized proto parts tomorrow along with the glass for doing fit and finish. Just going to have to work like crazy to have these all together in numbers for Vegas, we got a bunch of those little 350mah eGo batteries in Blue, Red and Hot Pink as these colors match pretty good with our Caps and IBTipsys so they are going to look incredibly cute together. I will be putting up some pictures of the protos in the different sizes but you can bet there will be a 15mm Halfling with Blue Caps and Bishop on a Blue 350 eGo in my pocket soon
Seems things are on track for the Tiny Tank, will have the first non anodized proto parts tomorrow along with the glass for doing fit and finish. Just going to have to work like crazy to have these all together in numbers for Vegas, we got a bunch of those little 350mah eGo batteries in Blue, Red and Hot Pink as these colors match pretty good with our Caps and IBTipsys so they are going to look incredibly cute together. I will be putting up some pictures of the protos in the different sizes but you can bet there will be a 15mm Halfling with Blue Caps and Bishop on a Blue 350 eGo in my pocket soon
When will the black caps for 22's be back in stock? Was trying to order an IB hafling but the caps are out of stock
I'm not ashamed to admit I only visit this thread based on the title alone.
Sent from my LG-MS770 using Tapatalk 2
Sent from my LG-MS770 using Tapatalk 2
Nezzy, just put them back up. We got in Black, Blue, Green and Red today. Should be getting more inventory on the rest of the colors in the next week or so. We also have stock coming on the 19 anodized caps to boost those numbers back up and get the few that are sold out in those back in stock. 300 sets of the Black 22s so hopefully you get yours
Seems things are on track for the Tiny Tank, will have the first non anodized proto parts tomorrow along with the glass for doing fit and finish. Just going to have to work like crazy to have these all together in numbers for Vegas, we got a bunch of those little 350mah eGo batteries in Blue, Red and Hot Pink as these colors match pretty good with our Caps and IBTipsys so they are going to look incredibly cute together. I will be putting up some pictures of the protos in the different sizes but you can bet there will be a 15mm Halfling with Blue Caps and Bishop on a Blue 350 eGo in my pocket soon
lol I love a man that can call things 'cute' with manly confidence. ha ha
I got the email about the caps being back in stock..yay!
Question about the tiny tank color options: Is there not an option to have them swirled or mottled? When I select the color tube option... a box pops up that says "Pick a Color ONLY - Type color choice(s) below:" Are they only available in solid colors?
Time to bring the retro glitter back if I can only do solid! lol I gotta have my bling somehow, someway
Last edited:
We need a huddle... you were asking about the 22mm HalfLing. The Tiny Tank is gonna be real tiny, 15mm OD to fit an eGo battery. Here is a couple of HalfLing tanks on a mamu Stealth and my new Provari I got while visiting a new vape shop on my BDay this week... OCD is Fiddy now
About the colors, I will check that now. All the options we have for our other tubes should be available.
I saw what you did there
About the colors, I will check that now. All the options we have for our other tubes should be available.
I saw what you did there
Ok, now I am confused, I looked both at the complete tanks where you can put just a tube in your cart and under Tubes. Both of these show the option for the HalfLing Tube and below that is a box for adding color. When I select Add Color to Tube a dropdown box shows up above where the type it in box is with all of the options. The text box if for the Pick a Color Option so if you want isnt in the list you can leave a note there and the girls will make it for you.
The possibilities are almost endless and The Mrs and The Offspring do their best to get folks what they want.
The possibilities are almost endless and The Mrs and The Offspring do their best to get folks what they want.
Thank you for your order!
Done!! I think I got it right. I hope! My order #is 754805555 if you need to make sure I didnt hose it up
I am hoping what I ordered was a 22mm hafling tank with black caps and a mottled abysse and merlot tube. And 15 of the pre-punched 3.2 hafling cartos.
Done!! I think I got it right. I hope! My order #is 754805555 if you need to make sure I didnt hose it up
I am hoping what I ordered was a 22mm hafling tank with black caps and a mottled abysse and merlot tube. And 15 of the pre-punched 3.2 hafling cartos.
I have a provari mini too! Its going to look darling! How much juice does the hafling hold again? A little over 1ml?
The whole package is so compact yet solid in the hand, you are going to like this as long as you are not a 15ml a day vaper I fill it a coupe times a day, easy peasy once you get the hang of filling them. It is just over a ml in capacity. I just lower the carto below the cap and tilt it to the side, if you have trouble keeping the liquid out of the carto doing this then the refilling tip does wonders for that. Takes me seconds to fill a tank, any time I go out I just toss my eliquid bottle in my pocket and I am good to go.
Couple of things about these HalfLing cartos, they are a little warmer than Standards so if it is too warm for you just turn the voltage down a little. They are also done when they are done, when the tank is empty you will notice they dont keep going like longer ones do so fill the tank back up when you notice the change or better yet when it appears empty. I had these made with the hole 3mm lower than the cartos you normally find, these will drain a tank like nobodys business but since the hole is lower they may not work in other tanks with fatter caps not that anyone else has a tank for a 19.8mm carto but you never know.
You got it right on the selections and should have it midweek next week. Sadly the girls are done for tonight or you might have had a shot at Monday,
Thanks for the well wishes, there was a time when I never imagined I would see this but now that I am here it is just incredible. We have all be loving the opportunity to connect with so many folks around the world. Not piling up gold at it but a warm heart has its own riches.
I fill it a coupe times a day, easy peasy once you get the hang of filling them. It is just over a ml in capacity. I just lower the carto below the cap and tilt it to the side, if you have trouble keeping the liquid out of the carto doing this then the refilling tip does wonders for that. Takes me seconds to fill a tank, any time I go out I just toss my eliquid bottle in my pocket and I am good to go.Couple of things about these HalfLing cartos, they are a little warmer than Standards so if it is too warm for you just turn the voltage down a little. They are also done when they are done, when the tank is empty you will notice they dont keep going like longer ones do so fill the tank back up when you notice the change or better yet when it appears empty. I had these made with the hole 3mm lower than the cartos you normally find, these will drain a tank like nobodys business but since the hole is lower they may not work in other tanks with fatter caps not that anyone else has a tank for a 19.8mm carto but you never know.
You got it right on the selections and should have it midweek next week. Sadly the girls are done for tonight or you might have had a shot at Monday,
Thanks for the well wishes, there was a time when I never imagined I would see this but now that I am here it is just incredible. We have all be loving the opportunity to connect with so many folks around the world. Not piling up gold at it but a warm heart has its own riches.
Thanks Rocco, we had a great time grilling with family down at the lake Saturday... back to the grind now though. Hehe, who am I kidding, I worked Saturday when we got back and Sunday.
Here is a shot of the Tiny Tank Prototypes. From left to right is HalfLing on a 350mah next Standard on a 650mah Winder and last XL on a 400mah Twist. You can sort of make out the groove on the caps on the XL one. I put that there with the thought of being able to add the orings as pictured on the others and they make a great bumper. For those who like to stand up their eGos which constantly fall over all they do is bounce with these orings.
Going to check capacity on these soon and of course the numbers will be "Tiny" but we showed them off a little over the weekend and feedback has been great, I think they are going to be a hit. We should have the anodized parts in before Vegas so just a couple more weeks to go, I think the colored parts are really going to make these pop and a few of our colors match our Winder batteries pretty close so they are going be make for a sharp setup. Looking at under a Fifty for Tank, IBTipsy, Cartomizer, Charger, Winder and Beauty Ring.
Here is a shot of the Tiny Tank Prototypes. From left to right is HalfLing on a 350mah next Standard on a 650mah Winder and last XL on a 400mah Twist. You can sort of make out the groove on the caps on the XL one. I put that there with the thought of being able to add the orings as pictured on the others and they make a great bumper. For those who like to stand up their eGos which constantly fall over all they do is bounce with these orings.
Going to check capacity on these soon and of course the numbers will be "Tiny" but we showed them off a little over the weekend and feedback has been great, I think they are going to be a hit. We should have the anodized parts in before Vegas so just a couple more weeks to go, I think the colored parts are really going to make these pop and a few of our colors match our Winder batteries pretty close so they are going be make for a sharp setup. Looking at under a Fifty for Tank, IBTipsy, Cartomizer, Charger, Winder and Beauty Ring.
- Status
Similar threads
