RDA Dotmod Petri v2

Status
Not open for further replies.

Jvincent516

Senior Member
Aug 29, 2015
187
427
37
I've not heard of that site, I got mine from localvape & I'm not too concerned with getting a second v2. Good looks on that though, I'd still call that shop and see if they're legit.
Yea I haven't heard of them either. So I got a message back from dot mod saying local vape should have more in stock in a couple weeks. Hopefully I didn't get screwed out of a 100 bucks. Guess I'll find out next week.
 

Sed8op8

Super Member
ECF Veteran
Jan 6, 2016
721
1,432
35
Yea they seem legit from what I found also, plus they answered my emails quickly. Let's hope so anyway. I can't stop looking at pictures of this thing. It's beautiful...
For real !! I have always wanted one and it was mos def more then I'm used to spending but I needed it smeagol style ohhhhhh my precious ohhhh
 

Tom Forde

Ultra Member
ECF Veteran
Mar 16, 2015
1,548
2,220
NJ
Lol I'm the same way, little pricey for my taste but with the v2 including the drip tip and all I couldn't pass it up. The gold is just mesmerizing.... it's all over instagram. I can't wait.
The gold is so so shiny in person. It's too nice. And to NOT strip your screws, I recommend a 0 or 00 Phillipshead screwdriver. It's pretty tiny. I have one from a FT velocity clone that came with Phillips grub screws instead of Allens.
image.jpeg
goooooollldddd
image.jpeg
it also comes with an Allen key (for the posi-post) but it fits into the screws as well.
@Retro138 where you at? You have a v2, lets see some pics and builds!
 
Last edited:

Jvincent516

Senior Member
Aug 29, 2015
187
427
37
FYI - We Vape Here now has a little blurb under the description of the v2 on their site:

Petri V2 Atty RDA by dotMod

You're welcome ;)
Thanks for the heads up, they told me it would be shipped out this Saturday. Doesn't look like I'll be getting mine any time soon sadly. But if you guys want to keep posting pictures please do... so I can drool more, and think of nice builds to put in it. Lol

So I emailed them again asking if they were getting a shipment of the v2's today like they told me the other day and this was the response....

"Thank you for your email. We were informed by dotMod that we would receive our order today. In the event your order does not ship tomorrow, we will make sure to include a free 15ml bottle of eliquid on us for the delay. If you would like to let us know your flavor preference and MG level, we can select a bottle that we think you would love.

We apologize for any inconvenience caused and please feel free to contact me"
I'm more confused now then before lol
 
Last edited:

Tom Forde

Ultra Member
ECF Veteran
Mar 16, 2015
1,548
2,220
NJ
Thanks for the heads up, they told me it would be shipped out this Saturday. Doesn't look like I'll be getting mine any time soon sadly. But if you guys want to keep posting pictures please do... so I can drool more, and think of nice builds to put in it. Lol

So I emailed them again asking if they were getting a shipment of the v2's today like they told me the other day and this was the response....

"Thank you for your email. We were informed by dotMod that we would receive our order today. In the event your order does not ship tomorrow, we will make sure to include a free 15ml bottle of eliquid on us for the delay. If you would like to let us know your flavor preference and MG level, we can select a bottle that we think you would love.

We apologize for any inconvenience caused and please feel free to contact me"
I'm more confused now then before lol
That's really pretty weak on their part. It sounds like they're saying they didn't receive their wholesale order. And how are they going to know which 15ml flavor you want? I'd get back to them on that part.

The build in mine is actually not just a simple alien. It's a little different. It's something I've not seen before until I did it.
image.jpeg
Check out under the kinked wrap. I'm probably going to change these out today for a set of framed staples, 28g frames/2 ply .3x.1mm/2 ply .4x.1mm/44g with a 34g alien wrapped over it. 44g is so thin, it virtually made no difference when I alien'd the framed staple. However I found that using 27g as the core to wrap my alien around with my next go at these coils was perfect to fit over a 44g (.05mm) wrapped 28g framed staple.
image.jpeg

My v1! Series mod build, 8 wraps framed staple alien, 28g/4ply .4x.1mm/38g alien
image.jpeg

I'd try to reach the shop again, hopefully you can get this situation figured out.
 

Bn0_Vapes

Full Member
Feb 20, 2016
25
6
33
First I wanna say I don't care what you have to say if your gunna be disrespectful about what I'm gunna post.

Ok so I have never owned any of the Petri series and I'm not gunna lie I'm a little disappointed with this v2. First I wanna say I just got mine today and I already stripped one of the screws doing my FIRST build on it. The airflow is kinda lacking for me, I like a lot of airflow, it also make a whistle sound. The juice well isn't as deep as I though. And the O rings on the deck aren't that good. For 90$ I would have though I was gunna get somthing amazing, I just Pre Ordered the Goon Rda, by Blue eyes goon and 528 custom vapes, and that was 60$ and that thing looks NEXT LEVEL!! I don't hate the Petri just wish it was a little different! Everyone has their opinion and I'm just giving mine.
 

Bn0_Vapes

Full Member
Feb 20, 2016
25
6
33
Thanks for the heads up, they told me it would be shipped out this Saturday. Doesn't look like I'll be getting mine any time soon sadly. But if you guys want to keep posting pictures please do... so I can drool more, and think of nice builds to put in it. Lol

So I emailed them again asking if they were getting a shipment of the v2's today like they told me the other day and this was the response....

"Thank you for your email. We were informed by dotMod that we would receive our order today. In the event your order does not ship tomorrow, we will make sure to include a free 15ml bottle of eliquid on us for the delay. If you would like to let us know your flavor preference and MG level, we can select a bottle that we think you would love.

We apologize for any inconvenience caused and please feel free to contact me"
I'm more confused now then before lol
I have some 26+36 aliens in mine, 4 wraps clocks in at .09 ohms, the Petri doesn't have a lot of airflow so it's kind of a hot vape, 5 wraps would be better
 

Tom Forde

Ultra Member
ECF Veteran
Mar 16, 2015
1,548
2,220
NJ
First I wanna say I don't care what you have to say if your gunna be disrespectful about what I'm gunna post.

Ok so I have never owned any of the Petri series and I'm not gunna lie I'm a little disappointed with this v2. First I wanna say I just got mine today and I already stripped one of the screws doing my FIRST build on it. The airflow is kinda lacking for me, I like a lot of airflow, it also make a whistle sound. The juice well isn't as deep as I though. And the O rings on the deck aren't that good. For 90$ I would have though I was gunna get somthing amazing, I just Pre Ordered the Goon Rda, by Blue eyes goon and 528 custom vapes, and that was 60$ and that thing looks NEXT LEVEL!! I don't hate the Petri just wish it was a little different! Everyone has their opinion and I'm just giving mine.
What did you strip, your screw head or the threading? And I've noticed a little whistling with it, but only when there is no vapor production. The o-rings aren't the best, I prefer the clear o-rings that came with my v1 Petri. If you have any paintball shops near you or something of the like, check out getting a new set of o-rings that go on the compressed air or co2 tanks. They're the clear ones, are stronger & will fit on the deck. I'm curious as to how you stripped your screw but dotmod will help you if you shoot them an email with your issues.

I didn't make this thread for the purpose of flaming people who oppose the Petri, but as a discussion about the atty and to keep that discussion going.

I came from the v1 so I knew what to expect from the v2. You could always drill out your cap or purchase a cloud cap (4x3mm airflow holes, the same as a Kennedy) if you want more air.
 

Bn0_Vapes

Full Member
Feb 20, 2016
25
6
33
What did you strip, your screw head or the threading? And I've noticed a little whistling with it, but only when there is no vapor production. The o-rings aren't the best, I prefer the clear o-rings that came with my v1 Petri. If you have any paintball shops near you or something of the like, check out getting a new set of o-rings that go on the compressed air or co2 tanks. They're the clear ones, are stronger & will fit on the deck. I'm curious as to how you stripped your screw but dotmod will help you if you shoot them an email with your issues.

I didn't make this thread for the purpose of flaming people who oppose the Petri, but as a discussion about the atty and to keep that discussion going.

I came from the v1 so I knew what to expect from the v2. You could always drill out your cap or purchase a cloud cap (4x3mm airflow holes, the same as a Kennedy) if you want more air.
I stripped the post screws, and check this out. So I go to take my first build out cause I notice the positive post was lose, and I take that Allen wrench they give us to tighten it down and it doesn't want to tighten down, it's like the screw is to small and now it won't even stay on the deck at all, I called the place I ordered it from and they said 3 out of the 10 they got have the same problem, and that NOT including mine, like this is straight BS, they might have really messed ALOT of these v2s up
 
Status
Not open for further replies.

Users who are viewing this thread