e-smokeguru official thread

[Hernan Sabai]

These are the parts required to build a complete Ithaka Update Kit:

-From left to right-
(some components are mounted)

1 x Mouthpiece for Ithaka update
1 x Center Post for Ithaka update*
1 x Penelope V3 / Ithaka Update /Tilemahos Positive Pin*
1 x Penelope V3 / Ithaka Update Sandwich Plastic
1 x Penelope V3 / Ithaka Update Insulator
1 x Penelope V3 / Ithaka Update Negative Base*
1 x Penelope V3 / Ithaka Update / Tilemahos Negative Pin*
1 x Housing for Ithaka update
1 x Penelope V3 / Ithaka Update Center Post Plastic
1 x Center Post Pin (Brass) for Ithaka update
1 x O-Ring (2mm thick, 8mm outside diameter, 3.5mm internal diameter)
1 x Penelope V2 / V3 / Ithaka Update AD Pin

2 x Penelope V3 / Ithaka Update / Tilemahos Wire Holder*

*Mounted on picture

Out of stock (at the time of this post):

Penelope V2 / V3 / Ithaka Update AD Pin
Penelope V3 / Ithaka Update Negative Base
Penelope V3 / Ithaka Update Insulator

Ariel, you always make a great work for GG people.

 

[breminator]

These are the parts required to build a complete Ithaka Update Kit:

-From left to right-
(some components are mounted)

1 x Mouthpiece for Ithaka update
1 x Center Post for Ithaka update*
1 x Penelope V3 / Ithaka Update /Tilemahos Positive Pin*
1 x Penelope V3 / Ithaka Update Sandwich Plastic
1 x Penelope V3 / Ithaka Update Insulator
1 x Penelope V3 / Ithaka Update Negative Base*
1 x Penelope V3 / Ithaka Update / Tilemahos Negative Pin*
1 x Housing for Ithaka update
1 x Penelope V3 / Ithaka Update Center Post Plastic
1 x Center Post Pin (Brass) for Ithaka update
1 x O-Ring (2mm thick, 8mm outside diameter, 3.5mm internal diameter)
1 x Penelope V2 / V3 / Ithaka Update AD Pin

2 x Penelope V3 / Ithaka Update / Tilemahos Wire Holder*

*Mounted on picture

Out of stock (at the time of this post):

Penelope V2 / V3 / Ithaka Update AD Pin
Penelope V3 / Ithaka Update Negative Base
Penelope V3 / Ithaka Update Insulator

Great job for the community, thank you for all you've done.

 

[Risto]

Thodouris you are late on the ggts. It is old school now

It's heresy!
He's speaking heresy !
Even to think of it is blasphemy.
Yes, because he' s about to commit heresy.
These heresies will have fatal consequences for the world vaping, particularly in Greece.
He must do public penance for his his words.
There' s still time to recant of your heresy, Aal_.

Caution!
Be resolute in the face of such heresy.

 

[Aal_]

It's heresy!
He's speaking heresy !
Even to think of it is blasphemy.
Yes, because he' s about to commit heresy.
These heresies will have fatal consequences for the world vaping, particularly in Greece.
He must do public penance for his his words.
There' s still time to recant of your heresy, Aal_.

Caution!
Be resolute in the face of such heresy.

Lol, heresy from me? I think I had enough of ggts

 

[breminator]

Lol, heresy from me? I think I had enough of ggts

Enough?....Enough?....

I think you have to sell some things to me.

 

[Ariel_MX]

Thank you so much. I'm going to wait until I can purchase a complete one. Your help is greatly appreciated!

Ariel, you always make a great work for GG people.

Great job for the community, thank you for all you've done.

Thank you guys, but was my fault, that information should have been in the GG Wiki, so better late than never

I just added an Ithaka's sub section for the Ithaka's Update:

http://ggwiki.et.com.mx/index.php/Ithaka#Ithaka_Update
Ithaka - E-Cigarette Wiki

(Have to upload the pictures to the original GG Wiki) - Pictures added -

 

[Samkinra]

Hey, possible to list Penelope V3 and V2 in short mode? Like ithaka in update mode for sale


Sent from my iPad while using Esterigon

 

[RandomFellow]

Ariel, you are awesome as usual!!!

 

[Ariel_MX]

Hey, possible to list Penelope V3 and V2 in short mode? Like ithaka in update mode for sale


Sent from my iPad while using Esterigon

Of course,

I will try to update the GG Wiki in these days

 

[igatos]

New family member Stealth

 

[imeothanasis]

Sure Brem. I think that I need 1 more month for all these pieces.

When will this be?
Did you have a estimated date therefore?
Thanks a lot Imeo, we are all a little bit nervous

 

[imeothanasis]

I am making more Random. Vasilis and Rob will have a lot of them in about 1 month

Same here. I don't think I will ever own this part. :-(

 

[imeothanasis]

Old alloy Lock

@Vassilis. GGTS Engraved tube, GGTS Venting cap and GGTS telescope brass, are old or new alloy?

 

[Aal_]

Imeo, you updated the JustGG and Stealth but they are out of stock. Were the updates on the ones that finished?

 

[billypapa]

Aal,
this was not the updated ones, this was stock i had collect

The updated Just GG & Stealth comes soon, and a special ESG edition too

 

[Mddally]

Imeo just gg axle has changed, battery post is simpler without steel cover plastic and oring
I still need original parts for Axle, axle ss cover and axle spring cover, I still need three of each
And am having panic attack after reading this please say your still going to make them ?

 

[imeothanasis]

Why do you need them Md?

Imeo just gg axle has changed, battery post is simpler without steel cover plastic and oring
I still need original parts for Axle, axle ss cover and axle spring cover, I still need three of each
And am having panic attack after reading this please say your still going to make them ?

 

[Mddally]

Imeo, i'm putting together 2-just Gg with parts already have and one I lost cleaning, Still need 3 SS cover for axle to complete,
I guess you could run them without but I like everything to be gg original build. Please make them

 

[locksley]

Imeo... need this...

 

[Aal_]

Forgot abou the sale today. I wanted an esterigon button brass pin. Was it ever in stock?

Can someone tell me if it is going to be in stock soon?