Ejuice calculator (added quantity calculations)

[tomjw3]

Dan's post #609 has the answer. I keep forgetting how to do this so I copied it into the Calc LOL.

 

[fed71]

For those who are interested - eJuiceCalculator, 1.0beta1 for MacOS
The program is freeware.

- eng / rus localization - switches to the settings (you must restart the program)
- Select the icon currency (at the rate of conversion is no - there is no exchange calculator)
- Calculation of the two liquids
- In the setting of the price added flavoring for 2 liquids
- Added printing for two fluids (for one / two-fluid choice is based on the printing of the active tab, the settings will not print)
saves its state in the ~ / Library / Preferenses / ru.ecigtalk.eJuiceCalculatorII.plist - if there are any problems, the file can be removed when you restart the program will return to the default settings (the same for the master reset button);
- Drop all liquids - in the settings;

 

[Pandemoniac]

I am having some difficulty figuring out the nic levels in sec 1 - say I'm using pure nic that would be 999.00mg or 99.9% as well the target amount would be 6% or 6mg I cant tell as it says % on the left and mg on the right sorry if this has been asked before but searching this thread is proving difficult for me

 

[Hoosier]

I am having some difficulty figuring out the nic levels in sec 1 - say I'm using pure nic that would be 999.00mg or 99.9% as well the target amount would be 6% or 6mg I cant tell as it says % on the left and mg on the right sorry if this has been asked before but searching this thread is proving difficult for me

There is a reason this information will not be found here on ECF. The discussion of pure nic is forbidden. The main reasoning is that if you have to ask, then you are far from qualified from being able to handle it without endangering yourself and others, plus are likely not to have the proper lab equipment to enable safe handling.

There is a sticky a little further down on these sticky's that explains that this topic is verboten.

 

[Koman]

I am having some difficulty figuring out the nic levels in sec 1 - say I'm using pure nic that would be 999.00mg or 99.9% as well the target amount would be 6% or 6mg I cant tell as it says % on the left and mg on the right sorry if this has been asked before but searching this thread is proving difficult for me

Yeah, that can be tricky.

 

[Pinkcloudtracy]

Kat, I admire Dan's work so much, but I can't figure the chart out either, I'm a mathematical dummy. I use this one that calculates for you, alot of members use it. Easy peesy

eJuice Recipe Calculator

OHHHH MYYYYY GOD Thank you! I am such a d- student and I'm on a Mac so I can't use many of the downloadable calculators. This one worked. YAY

 

[IndyJones]

can someone save me the time of searching this entire thread and tell me the # of the post with the latest version of the calculator for windows?

 

[mightymen]

can someone save me the time of searching this entire thread and tell me the # of the post with the latest version of the calculator for windows?

Here's the down load link for newest scubabatdan spreedsheet
https://www.filesanywhere.com/fs/v.aspx?v=89716a8d58646ea772a0

 

[Twinkie Mayne]

no mac version?

 

[Pinkcloudtracy]

I found an app called "e-juice" free in the app store. A total no brainer thank God!!!

 

[IndyJones]

thx, not what i was looking for

 

[IndyJones]

can someone save me the time of searching this entire thread and tell me the # of the post with the latest version of the calculator for windows?

hmm, should i start at the beginning or search back from here?

 

[Hoosier]

hmm, should i start at the beginning or search back from here?

The link on the first post is a Fileshare link and just the latest version is at the link, v13. https://www.filesanywhere.com/fs/v.aspx?v=89716a8960646eb99c6c

It's an Excel file, so you'll need Excel or Open Office on your windows system.

 

[IndyJones]

got it. thx

 

[Koman]

Good stuff, thank you!

 

[dmall]

Scuba, I am using your spreadsheet but having a problem with the VG sheet. In the section that says "select a recipe name from the list" the values of the ingredients has err 509. There is something wrong with the formulas in that section. I have tried to copy and paste the formula from the PG nic page but that doesn't work either. I can't figure out how you created your formulas so help me out please. Do those formulas work on your original? I have a mac and converted the excel spreadsheet to an open office one. Did it not copy your formulas? If that is the case can you PM me or post the correct formula for me to put there. The dropdown list works but the ingredients and the percentages only have err 509 in the cells.

 

[Lera]

I'm such a newbie and I'm lost. I just bought from wizard labs:

Propylene Glycol - 500ml
Vegetable Glycerin - 500ml
12mg Nicotine solution - 60ml
- Carrier Base Liquid: 100% USP Propylene G..
20ga Blunt Tip Luer-Lock Needle 1.5" - Quantity Discounts


I want to make two 50 ml bottles at a time with just banana and I want it sweet tasting so I also bought some vanilla flavoring.

So looking at the calulator I'm lost, it says alcholo or water...I do not know what to enter in each field or now what to do. Can someone give me instructions on exactly what to do to create a 70/30 mix with only 6 mg of nic or less.

Thank you

 

[afallucco]

Not with this calculator, but this is what I quickly put together based off what you told me. The nicotine was cut in 100% pg according to you so that is in this calculation. Also I don't know what flavor brand you're using but judging by how strong the flavors are I used low percentages. Also with making 50ml you'll want to let this steep a couple days before you Vape it. If it's not sweet enough you can add some ethyl maltol but if you add too much flavors start to taste artificial.

Sent from my Galaxy Nexus using Tapatalk 2

 

[Hoosier]

I'm such a newbie and I'm lost. I just bought from wizard labs:

Propylene Glycol - 500ml
Vegetable Glycerin - 500ml
12mg Nicotine solution - 60ml
- Carrier Base Liquid: 100% USP Propylene G..
20ga Blunt Tip Luer-Lock Needle 1.5" - Quantity Discounts


I want to make two 50 ml bottles at a time with just banana and I want it sweet tasting so I also bought some vanilla flavoring.

So looking at the calulator I'm lost, it says alcholo or water...I do not know what to enter in each field or now what to do. Can someone give me instructions on exactly what to do to create a 70/30 mix with only 6 mg of nic or less.

Thank you

OK, you have PG, VG, 12mg nic in PG and needles. I'm going to assume you have syringes to put the needles on and you don't plan on moving VG through the 20ga regardless, or you can lift heavy things with your fingertips and do plan on moving VG through 20ga needles. (I don't know, but I don't use needles on my syringes, but I know that 20ga is pretty small for a thick liquid.)

Now, you don't know anything about mixing so your first thought is to make 100ml, in two bottles, and we don't know what flavoring you're using except that they are banana and vanilla flavors.

So, in section 1 of the PG Calculator tab, you have 12 in the base nicotine PG field, and 6mg in the target nicotine PG, and 50 in the amount to be made, and 30 in the % VG. I don't see why you'd need PGA/water, or anything else since that is used to thin VG and you only have 30%, so that would be nothing=0. Now you have to decide on what to put in the flavoring percentage. I don't have a clue there as I'm sure I've never used the banana flavoring you have and while I've used many vanilla's I don't know what you have, but section 2 shows the amounts of each component to make the juice you entered in section 1. (Section 6 is where you put the various flavors going into the juice and what ratio you want them in and it will show how much of each individual flavoring as section 2 will show the total flavoring.)

Tell you what, before you mix 100ml of unvapeable juice, why don't you spend some time with smaller amounts figuring out what flavoring level you need? You can post a new thread in this sub and get some advice from other banana flavor kind of people. That will help you get closer on the flavoring % on the first try.

The above in conjunction with the Instructions tab should give you a pretty good idea of how to use the calculator and it gets to be real easy with further use.

 

[flintlock62]

Simply ignore the water/alcohol and go on with it. You only need a thinner with high VG mixtures. You will find 20 ga needles useless with VG. Even with a 16 ga needle, it's hard to suck up VG. I just use a syringe without the needle for that. 16 ga needles for everything else. 20 ga will work with 100% PG, and flavorings.

I also agree with Hoosier on making a small batch and see how much flavoring you like. No more than 10 ml.

I'm such a newbie and I'm lost. I just bought from wizard labs:

Propylene Glycol - 500ml
Vegetable Glycerin - 500ml
12mg Nicotine solution - 60ml
- Carrier Base Liquid: 100% USP Propylene G..
20ga Blunt Tip Luer-Lock Needle 1.5" - Quantity Discounts


I want to make two 50 ml bottles at a time with just banana and I want it sweet tasting so I also bought some vanilla flavoring.

So looking at the calulator I'm lost, it says alcholo or water...I do not know what to enter in each field or now what to do. Can someone give me instructions on exactly what to do to create a 70/30 mix with only 6 mg of nic or less.

Thank you