Eleaf GS Air Fan : Part 2

[rocketman29]

Will the air coil fit into an evod base?

 

[GranFumador]

If (1) you now and then drop a GS-Air, or M, or Ms, or tank and (2) save all but the broken glass for parts , you can countersink a board from underneath, insert an ego/510 extender, to act as a nut, and just screw the surviving GS-* base onto it.

Sounds clunky, is quick and easy, and it works.

 

[Katya]

I have one of those, Katya, and I actually did get the cap off by using it.

Right. I meant this as a base for coil building--not for removing the cap.

The absolute easiest way to remove the cap is detailed in the video on the blog by @IMRs !

YES!

 

[Katya]

Will the air coil fit into an evod base?

Yes.

Every eGo threaded device is also 510 threaded.

 

[GranFumador]

Will the air coil fit into an evod base?

Don't know. The coils fit any of the kanger Protank I and II bases.

 

[rocketman29]

It's from IMRs video. That looks like the base I am getting.

 

[Katya]

It's from IMRs video. That looks like the base I am getting.

Do you really need to buy one? Don't you own an old eGo-510 connection somewhere?

 

[rocketman29]

Do you really need to buy one? Don't you own an old eGo-510 connection somewhere?

I do, but the coil does not screw into it.

 

[Katya]

I do, but the coil does not screw into it.

 

[rocketman29]

This is the ego-510 adapter I have.

 

[GranFumador]

This is the ego-510 adapter I have.

View attachment 564777

OK, now screw an old kanger protank base, or any gs-*** base onto that, and you're set.

 

[FranC]

I ended up digging out an old ego and screwed on an old kanger base. The ego is plenty to hang onto while taking the cap of a gs coil.

 

[Cheechako]

I ended up digging out an old ego and screwed on an old kanger base. The ego is plenty to hang onto while taking the cap of a gs coil.

 

[rocketman29]

OK, now screw an old kanger protank base, or any gs-*** base onto that, and you're set.

I'm looking for something to screw my coil into. The coil sits too low in the GS bases.

 

[FranC]

I had one cap come off so hard that I bent the connector. Didn't know it til I tried to use it. It screwed in the base ok but wouldn't screw together

 

[Flowersoul]

I was busy with other things for most of the afternoon, but did find an old ego and base of an evod.....so I will try my hand at that.....fits fine.

 

[IMRs]

I had one cap come off so hard that I bent the connector. Didn't know it til I tried to use it. It screwed in the base ok but wouldn't screw together

I really don't understand how you're taking it off?? If you look at the video, it comes off with ease every time.

 

[Flowersoul]

Odda my goodness.....cap is off without too much difficulty!

 

[GranFumador]

I'm looking for something to screw my coil into. The coil sits too low in the GS bases.

WIth respect, I think you can make it work pretty easily with just a little practice.
As an experiment, I just wiggled the caps off of two different 1.5 ohm gs-air coils.
One was mounted on a protank base, the other on the afc base of a gs-air M.
You are correct. The coil sits a tad lower on the gs-air base, but I got both caps off with about five seconds of gentle rocking.

 

[Cheechako]

Gently rock back and forth and it will pop off. First time is the hardest.