Our dear, sweet TIBS has won a Cloupor Mini Plus in the forum contest!!!
Congrats, Tibs!!! ENJOY!
Congrats, Tibs!!! ENJOY!
Thanks. [emoji106]http://www.rockymountainvapor.com/index.php?main_page=product_info&cPath=88_94&products_id=429
Code: SUMMER15 for 25% off
Free shipping over $14.00
http://sweet-vapes.com/catalogsearch/result/?q=istick+40w+silicone
http://www.worldofvape.com/eleaf-istick-40w-silicone-sleeve/
http://www.ebay.com/sch/i.html?_fro...w+sleeve.TRS0&_nkw=istick+40w+sleeve&_sacat=0
I assume that you've checked the obvious things like corrosion and whether the pin moves freely. I don't have an answer to your problem but this might help with the aesthetic issue. https://www.fasttech.com/product/1923808-kepler-510-finned-heat-sink-for-atomizers I don't own any 30w iSticks but I always use an Ego adapter and a "beauty ring" on my 20w iSticks. I have a lot of them.I think i found the problem w/my istick 30w. it was always showing protection when trying to fire it.
i used the ego adapter that eleaf includes and it now fires consistently. no more protection errors.
does anyone know why this works, what specifically is wrong w/the 510 on the 1st gen 30w as i plan to fix it.
looks dumb w/adapter and a 510 tank.
It's already been suggested, but I was going to say get a one of those carto tank ring things (dang if I forgot the name of the things! Apparently Innokin got people calling them "beauty rings") I bought several. I know that Sweet Vapes has them, and probably MVS and MFS.I think i found the problem w/my istick 30w. it was always showing protection when trying to fire it.
i used the ego adapter that eleaf includes and it now fires consistently. no more protection errors.
does anyone know why this works, what specifically is wrong w/the 510 on the 1st gen 30w as i plan to fix it.
looks dumb w/adapter and a 510 tank.
That's because you have no beauty ring on there....I think i found the problem w/my istick 30w. it was always showing protection when trying to fire it.
i used the ego adapter that eleaf includes and it now fires consistently. no more protection errors.
does anyone know why this works, what specifically is wrong w/the 510 on the 1st gen 30w as i plan to fix it.
looks dumb w/adapter and a 510 tank.
doesnt matter how its screwed on protection error happens.That's because you have no beauty ring on there....
My guess is the tank pushes the 510 down too far, does it work fine partially unscrewed?
I get this on my 20W when the build is a little to close to the minimum resistance.
Pics please if you find anything interesting worth sharing.doesnt matter how its screwed on protection error happens.
but i did go through 4mls of juice w/adapter w/maybe one error, no its acting up like b4, either randomly or consistently it errors out.
my guess its still a 510 issue, will take apart and resolder
I think i found the problem w/my istick 30w. it was always showing protection when trying to fire it.
i used the ego adapter that eleaf includes and it now fires consistently. no more protection errors.
does anyone know why this works, what specifically is wrong w/the 510 on the 1st gen 30w as i plan to fix it.
looks dumb w/adapter and a 510 tank.
Never had a "protection" warning, but I use this airflow controller on my iStick 20 to protect the wonky threads and it works like a charm and doesn't add much height--and if there's a gap, it can be closed.
http://www.hoosierecig.com/Airflow-Controller-for-510_p_948.html
Good luck!
I've started using those on all my mods. In addition to protecting your mod threads, it also helps a lot when you have an RTA that won't fire because of how the 510 pin is adjusted. With this airflow controller, I don't have to adjust anything, they just work.
tweety is prepared for all eventualities!
I must be gifted because I really never had any of these problems.Yes, Ma'am. Be prepared is my motto!
Things do happen...
I must be gifted because I really never had any of these problems.