Eleaf Istick

[Bikenstein]

You do realized if you get at least 2 of them you don't ever have to pass through vape, so they could charge through the 510 connector as far as i'm concerned. Aesthetically though i prefer the bottom of the mod, just me.

That little hole ain't botherin me a bit. The only thing I don't care for is the chrome. SS would be a cheap fix to the fingerprints. I'll be glad when mine gets scratched up like the 30 so I'll quit wiping it off to get the shine back

 

[ThunderDan]

I think the micro USB placement on the 50w would be ideal for driving while charging and putting the mod in a cup holder. Other than that specific use, I don't see the point. Generally I would prefer it be on the bottom too, out of sight out of mind.

Sent from my Nexus 6 using Tapatalk

 

[Bikenstein]

All I can say is get used to it cause it's on the side. Who knows? If they get enough complaints, they may change it. and the chrome too.

 

[mudram99]

All I can say is get used to it cause it's on the side. Who knows? If they get enough complaints, they may change it. and the chrome too.

Well to late for me, I already have enough 50's to last me till the 100's make their debut. Maybe the 100's though will incorporate your suggestions

 

[Bikenstein]

Well to late for me, I already have enough 50's to last me till the 100's make their debut. Maybe the 100's though will incorporate your suggestions

Don't mind if they do, don't care if they don't

 

[mudram99]

And the really sad thing is even though I have 30's & 50's its my 20's that still get the most use.

 

[crazycooter]

Just watched that video I guess he did confirm what I've noticed also. There is a very slight delay in firing he measured .1 sec
In my basic testing I saw about .2 but that's because I was listening for it and not measuring it using a meter.
Is the 30w istick similar in results to 50w istick in its output?

 

[capthook]

... I happened upon this blog recently and found this person's views interesting and enlightening:

E-Cigarette Forum - rusirius - Blogs

I'm far from an expert on all that's available these days, but I happen to like vv/vw ergonomic devices with long battery life. So, the Sticks have been nice addition to my gear. I also like that they are lighter in weight than many other choices.

Thanks for the link.
I agree that surface area of a coil along the wick can be a key.
I recently got my first RTA.
I find a 28awg smaller ID (2mm) with more wraps (11) and 'higher' ohms (1.7) gives me more of the cooler/MTL/flavor vape I'm looking for.

 

[tearose50]

All I can say is get used to it cause it's on the side. Who knows? If they get enough complaints, they may change it. and the chrome too.

I think they moved it to the side/front/back because at the start of this thread that was a common complaint. It seems someone always finds something about a new device/topper that they want differently --- so we get more devices to choose from, or collect.

 

[mudram99]

Yeah I call it collect too, my wife sez it's a sickness though!

 

[Bikenstein]

I think they moved it to the side/front/back because at the start of this thread that was a common complaint. It seems someone always finds something about a new device/topper that they want differently --- so we get more devices to choose from, or collect.

I think it's the best place on the side up high where it should be YMMV They just need to change the caps to s.s.

 

[inspects]

Thanks for the link.
I agree that surface area of a coil along the wick can be a key.
I recently got my first RTA.
I find a 28awg smaller ID (2mm) with more wraps (11) and 'higher' ohms (1.7) gives me more of the cooler/MTL/flavor vape I'm looking for.

I like that too...about 1.5 or so...seems to have more flavor and doesn't need a 1000 watts----

 

[tearose50]

That little hole ain't botherin me a bit. The only thing I don't care for is the chrome. SS would be a cheap fix to the fingerprints. I'll be glad when mine gets scratched up like the 30 so I'll quit wiping it off to get the shine back

Here's a possible solution.

http://www.ebay.com/itm/Eleaf-iStic...621?pt=LH_DefaultDomain_0&hash=item2eddca03e5

Or, you can ask JWraps if they make them with the top and bottom pieces and have a wide selection of textures and patterns to choose from.

 

[Katdarling]

Well some good news for advocacy in my neck of the woods!
Attempt to regulate public e-cigarette use in Boca goes up in smoke
http://......./1GrY9YH

I would have love to advocate your advocacy, Ms. Pokes, but the link sure didn't work for me.

Before long I may offer somebody a bargain on my 60 watt SX350. It's a great mod but the feel in the hand doesn't compare to the feel of my Istick50. Since I don't have any way of accepting a credit card, it will have to be somebody that can lay cash in my hand.

Was about to advise/warn/let you know, but I do believe that's been done.

Yeah, finally. Guess I'm one of the last ones.The co-op did save me money and was fun, but it was hard to wait. These things are great. The ultimate mod, mainly because of the price and the feel and the size and the battery life and the performance and the looks and the quality and ............I also like the placements of the charge port and the buttons and the price and the performance and the output and...........

Don't hold back, Bikenz. Say what you really feel.

Sigh. Like I really NEED for things to be moving again! [emoji14][emoji16][emoji15]


Sent from my iPhone using Tapatalk

Pokemom, did I tell you I bought a new mod? I'd be remiss if I did not let you know.

That little hole ain't botherin me a bit. The only thing I don't care for is the chrome. SS would be a cheap fix to the fingerprints. I'll be glad when mine gets scratched up like the 30 so I'll quit wiping it off to get the shine back

WHAT? No SHINE? Oh sob sob sob...... say it isn't so.

 

[ruet]

I think it's the best place on the side up high where it should be YMMV They just need to change the caps to s.s.

How about an iStick Pro line? Something like a stainless steel shell, caps and buttons along with Gorilla Glass screen protection. At a $10-$20 premium ($10=mini, $15=30w, $20=50w) they would, IMO, still be a steal.

 

[inspects]

I think it's the best place on the side up high where it should be YMMV They just need to change the caps to s.s.

I agree wholeheartedly...I don't like laying the mods on their sides with a tank attached.

I'm too lazy to remove the tanks, so this works nicely for a lazy-man.....

Guess you fit the description too....Bike......

 

[inspects]

How about an iStick Pro line? Something like a stainless steel shell, caps and buttons along with Gorilla Glass screen protection. At a $10-$20 premium ($10=mini, $15=30w, $20=50w) they would, IMO, still be a steal.

Personally, I like the $45 buck disposable mods just the way they are....the 50's anyway.

Dislike the bottom usb port on the other iSticks.

I been using them for months now...I haven't had a problem with anything, no loose screens, no bad threads (even on 20's), NOTHING.

Some complain about button rattle, but I don't shake the battery for any particular reason. Therefore I'm not sure if the buttons rattles....

 

[inspects]

Anybody using Jeremy's famous Rayon wicking methods on their atty's?....using the 50 the other day I finally re-wicked a Kanger with Rayon....the stuff is incredible...no burnt dry hits using max VG.

Flavor is incredible. Wicks last and last and last.

I don't have the link handy at the moment, but if anyone hasn't ready Jeremy's thread about Rayon, they certainly should.

 

[mudram99]

Anybody using Jeremy's famous Rayon wicking methods on their atty's?....using the 50 the other day I finally re-wicked a Kanger with Rayon....the stuff is incredible...no burnt dry hits using max VG.

Flavor is incredible. Wicks last and last and last.

I don't have the link handy at the moment, but if anyone hasn't ready Jeremy's thread about Rayon, they certainly should.

http://www.e-cigarette-forum.com/fo...ck-better-flow-flavor-saturation-nic-hit.html

 

[Bikenstein]

Here's a possible solution.


Eleaf Istick 50W Wrap Vape Vapor Skin Decal Mod Sticker Cover Black Snake Skin | eBay




Or, you can ask JWraps if they make them with the top and bottom pieces and have a wide selection of textures and patterns to choose from.

Or duct tape

Don't hold back, Bikenz. Say what you really feel.

:

I'm too shy

How about an iStick Pro line? Something like a stainless steel shell, caps and buttons along with Gorilla Glass screen protection. At a $10-$20 premium ($10=mini, $15=30w, $20=50w) they would, IMO, still be a steal.

Yeah it would still be a great price but the cost for stainless caps would be nil

I agree wholeheartedly...I don't like laying the mods on their sides with a tank attached.

I'm too lazy to remove the tanks, so this works nicely for a lazy-man.....

Guess you fit the description too....Bike......

Thanks for the compliment