Eleaf Istick

[DancingHeretik]

MrsP0721, yes, a couple of people have already mentioned that happening to them.

leekeylee, here's a picture of my pink istick:

 

[STEAM_P0WERED]

MrsP0721, yes, a couple of people have already mentioned that happening to them.

leekeylee, here's a picture of my pink istick:

Is that an IBtanked carto, if so what size is it?

 

[oplholik]

I have a question, and I'm not complaining I promise, but I seem to have the worst luck when it come to, well EVERYTHING, so I was wondering, has anyone else had an issue with the fire button? It only happens one in a while so it's not a big deal, but sometimes when I push the fire button, it doesn't fire. It's corrected immediately (when I push it again, it'll work fine). It doesn't change how I feel about this mod by any means, it's still a GREAT mod for an amazing price and I will recommend it to anyone! I'm waiting for my others to come in (one was supposed to be here today, but it looks like USPS has it just sitting in limbo for some reason) and see if that one has the same issue.

The problem happens to me occasionally if I happen to have my thumb a little off, and I'm pressing more on the body than I am over the center of the button. It's not a misfire, it's just a position of the thumb.

 

[MrsP0721]

Ok, thank you guys! I just wanted to make sure it wasn't my bad luck lol.

Here's a pic of my pink as well (on the right).


PS I'm hooked on the vinyl wrap thing! I keep looking around at different places, finding all these amazing colors and textures! lol

 

[salemgold]

That would be so cold! lol

Warms it up pretty quickly.

 

[salemgold]

I have a question, and I'm not complaining I promise, but I seem to have the worst luck when it come to, well EVERYTHING, so I was wondering, has anyone else had an issue with the fire button? It only happens one in a while so it's not a big deal, but sometimes when I push the fire button, it doesn't fire. It's corrected immediately (when I push it again, it'll work fine). It doesn't change how I feel about this mod by any means, it's still a GREAT mod for an amazing price and I will recommend it to anyone! I'm waiting for my others to come in (one was supposed to be here today, but it looks like USPS has it just sitting in limbo for some reason) and see if that one has the same issue.

That has happened to me a few times. I paid close attention and it was actually getting power ( screen was on and puff counter was moving) last time that it happened. I think that my tank may have been loose. I am continuing to check it out as it happens which is very rare.

 

[DancingHeretik]

Is that an IBtanked carto, if so what size is it?

Yes, it is. It's the 22 mm XL.

 

[dwg64]

Just ordered my 2nd iStick from Vapenw. Should be here Tuesday. Now that I've been using and lovin my silver, blue is on its way!!

 

[athousandyears]

That has happened to me a few times. I paid close attention and it was actually getting power ( screen was on and puff counter was moving) last time that it happened. I think that my tank may have been loose. I am continuing to check it out as it happens which is very rare.

I made sure to look the last couple of times it has happened to mine and the screen was black as if I weren't pushing the button at all.

 

[MrsP0721]

I made sure to look the last couple of times it has happened to mine and the screen was black as if I weren't pushing the button at all.

That's what mine does too.

 

[GinnyTx]

If anyone's interested, my order from vapeoutlet is tracking as picked up yesterday and due for delivery tomorrow (WA to MI). Yippee! In time for Expo

Me too!! Mine's in cali!! and not just printing label printed, it LEFT the post office and on it' s way to Houston!! *doing happy dance*

and ebay canceled the item so if that happened to you don't freak out, Iv'e gotten them tons of times when they do that..you still have paypal as a recourse...

 

[clnire]

You can order free Di-Noc material from 3M.

You can order up to 5 patterns and two of each of the 5 if you check the box when you order. A blow drier will heat soften and then shrink the Di-Noc material. Some materials are real thick and will take a razor knife to cut while others are relatively thin and will cut well with an exacto knife.

..Surface Finishes

Haven't caught up since reading this post, but yes, free. I think they are 8x11???? Samples. You click on the color/pattern and if available as a sample, click on sample. It will go into your sample cart. Once you select your 5 samples, go to your sample cart and you can change the amount to 2 of each. You need to fill out some questions about your "business", but I was only emailed by one sales rep as a simple contact "if I can be of further assistance.....".

This material works great and all my mods/batteries are wrapped with different patterns. When I get a chance I can post a picture.

 

[dwg64]

No fire on button press here as well, maybe a couple times a day. It might just be my doing, but a deal breaker? Nope!! Got a blue one coming now[emoji6]

 

[four2109]

If anyone's interested, my order from vapeoutlet is tracking as picked up yesterday and due for delivery tomorrow (WA to MI). Yippee! In time for Expo

Are you sure you ordered from Vapeoutlet? They are near L.A., VapeNW is in WA.

 

[dwg64]

^^^^what four2109 said

 

[salemgold]

This is probably old news here but this is an interesting thread on Reddit about the iStick

http://www.reddit.com/r/electronic_.../were_working_on_the_istick_20_what_features/

I hope that at least 75% of the requests there are not added the the V2. They would have to drive the cost up. This was particularly interesting

Hi I am interested to know your thoughts on this thread and the corresponding chart.
Is it true the claim that the iStick cannot step down it's voltage?
This is an annoying problem for clearomizer users. For example, if I vape a Kanger Protank with a 1.5 ohm coil, the absolute minimum wattage I can output with a fresh battery is 12 watts. In my experience, Protanks work best at 6-12 watts, but to get that range on the iStick you would need a 3.0 ohm coil which Kanger does not produce.
Any thoughts on this? Any plans to add voltage step down in the future?

• permalink

[–]joyetechUSA[S] 12 points 3 days ago
We're aware of the claims that have been made--they're false. We'll be releasing a comprehensive video response to it in the coming days.

 

[drysprocket]

This is probably old news here but this is an interesting thread on Reddit about the iStick

http://www.reddit.com/r/electronic_.../were_working_on_the_istick_20_what_features/

I hope that at least 75% of the requests there are not added the the V2. They would have to drive the cost up. This was particularly interesting

Hi I am interested to know your thoughts on this thread and the corresponding chart.
Is it true the claim that the iStick cannot step down it's voltage?
This is an annoying problem for clearomizer users. For example, if I vape a Kanger Protank with a 1.5 ohm coil, the absolute minimum wattage I can output with a fresh battery is 12 watts. In my experience, Protanks work best at 6-12 watts, but to get that range on the iStick you would need a 3.0 ohm coil which Kanger does not produce.
Any thoughts on this? Any plans to add voltage step down in the future?

• permalink

[–]joyetechUSA[S] 12 points 3 days ago
We're aware of the claims that have been made--they're false. We'll be releasing a comprehensive video response to it in the coming days.

Interesting. I almost want to finally signup for a reddit account, just to give them feedback. First on my list....might be small, but I really want a rubber cover, ala sharkskin type. Or hopefully a 3rd party will make some. Seems like a no-brainer.

 

[salemgold]

Interesting. I almost want to finally signup for a reddit account, just to give them feedback. First on my list....might be small, but I really want a rubber cover, ala sharkskin type. Or hopefully a 3rd party will make some. Seems like a no-brainer.

View attachment 378596

I want to sign up just to tell most of those people to spend the $ and buy a Provari. Seems to be what they are asking for. But, this thread is linked there so, people are reading

 

[oplholik]

Can you get shrink wrap big enough? Wouldn't be a fancy design tho.

 

[Jayscuzzi]

New video on YouTube from eleaf for voltage test.
Tried to share but screwed it up