Eleaf Istick

[zoiDman]

The silver one I ordered from evape.us on Wednesday just arrived today. Ordered on 15th, shipped on 16th, and arrived on 18th; looks even better than the black one.

The Sliver is Nice. Isn't it?

And it should Hide Small Scratches better than a Colored One.

 

[r77r7r]

Whelp, put a 3 OHM carto on and it works @ the same settings as my innokin V3 now.
Maxes @10W and goes down to 3W/3V.
allows me to turn it way down when breaking in a new carto.


Anyone see a flat USB plug/cover for this?

 

[PaulBHC]

Do not plug the usb slot. That is the vent for a battery failure.

 

[scaredmice]

"Just a little tip for all you "Stickers" out there. Since the istick uses "AVG" to determine its operating level, add ten percent, 10%, to the displayed number to arrive at about what it would be on other devices that run "RMS". For example an 8 watt reading translates to about 8.8 watts on a VTR as an example. The actual factor is 1.111 times."


From what I have seen if you are running say 4v and it is putting out 4.7v is that not 2.8 watts or so higher then other rms devices?

Really?

The factor can be as high as 1,93 for power and 1,4 for voltages, if you drive your iStick at 3,0 V........ Good luck with that....

Hopefully, if you go up from 3,0 V you can easily find your sweet spot disregarding the mathematics. I'm fluent with them, but I do not vape with them.....

 

[drysprocket]

Every time I see that graph....the room spins, and I wake up a few minutes later naked outside in the fetal position.

 

[scaredmice]

Every time I see that graph....the room spins, and I wake up a few minutes later naked outside in the fetal position.

I warned you! Do not vape with mathematics!

You'd rather put a battery and an atomizer and suck it (do not forget to push the firing button)..... And with the iStick, you can omit the battery step.....

Not so big deal... not rocket science....and definitively you won't need a fire extinguiser....

About the naked thing...... Are you just vaping, or something else?.....

 

[Bored2Tears]

Happy to report I received my I stick today. It was ordered at 11am Tuesday from Vapenw.com. I took a leap of faith and ran my 2.2 ohm single coil Kanger PT2. It was well used already, and the I stick showed it as 2.4 ohm. It is a warm vape for sure....but actually my cinnamon juice is tasting better than it did on my VV device at 4.2V. I have kept the stick at lowest 3.0 leaf volts. Looking forward to getting my dual coil atomizer on it.

 

[friediceman]

The Sliver is Nice. Isn't it?

And it should Hide Small Scratches better than a Colored One.

I love it! A little slippery, but love it nonetheless. These two will be used in rotation until the next best thing comes along.

 

[salemgold]

I must say this. I have been using these for a few months and my flavors do not taste as good on any other mod that I have using the same coil. I seriously love my iSticks

 

[friediceman]

iStick quote of the day --- "put that damn silver thing down and go to bed!!!"

I've been holding it all afternoon and evening, guess wife had enough finally...

 

[Buster282]

That's the Best analogy I have seen yet! Leaf Volts!! thanks Bored

Someone needs to make Phil aware of this new and improved voltage calculation method that the iStick is using!

 

[Bored2Tears]

That's the Best analogy I have seen yet! Leaf Volts!! thanks Bored

Someone needs to make Phil aware of this new and improved voltage calculation method that the iStick is using!

someone else coined that term a while back in this thread. I cannot take credit... But it is fitting.

 

[rflash]

I must say this. I have been using these for a few months and my flavors do not taste as good on any other mod that I have using the same coil. I seriously love my iSticks

I'm noticing the same thing, don't know why. Just got mine on Thursday, vaping it pretty heavy, still have enough battery left to get thru the nite. Almost 3 days on a charge, it's my new best friend lol.

 

[salemgold]

I'm noticing the same thing, don't know why. Just got mine on Thursday, vaping it pretty heavy, still have enough battery left to get thru the nite. Almost 3 days on a charge, it's my new best friend lol.

It's weird. I don't even get as good of flavor using my DNA mod. Not complaing at all though

 

[Ryan Lee]

So I am loving my little iStick with the mini Naughty rocking on it. Question though, is their a version 2 in the works? Any links to said newer version, my research has failed me.

 

[Rourke]

Seems like a lot of people are using the the mini nautilus on their eleaf istick. I am hoping mine shows up on Monday. What confuses me is that I have read differing opinions on which coil to use. I know the BVC has received rave reviews, but I also read that dual coils, or the BDC, would handle the power better and therefore last longer. Any input would be much appreciated.

 

[redordead]

So yesterday my 2 week old istick stop firing. Ive been using aerotank v2's with it and the 510 had pushed right down. Even the ego connector wouldnt work with it.

After some searching, i come across the mvp fix thread. So i lifted the 510 pin up, and removed the extremely fragile (and crap) insulator/o-ring. I am a bit stuck for spares so i sliced down a kanger rubber grommet (large side) placed it underneath, and pushed the pin back down.

Its now firing but only with ego connector. But its working! [emoji1]

 

[redordead]

Just out og interest, has anyone had any problems with kayfuns, lemo or erlkonigin with the istick. Im thinking of buying another istick and one of these attys. Dont want the same issue i have now though!

 

[IMRs]

Seems like a lot of people are using the the mini nautilus on their eleaf istick. I am hoping mine shows up on Monday. What confuses me is that I have read differing opinions on which coil to use. I know the BVC has received rave reviews, but I also read that dual coils, or the BDC, would handle the power better and therefore last longer. Any input would be much appreciated.

I've been using the good ole glass evod on mine most of the time and it tastes wonderful!

 

[op22222]

So yesterday my 2 week old istick stop firing. Ive been using aerotank v2's with it and the 510 had pushed right down. Even the ego connector wouldnt work with it.

After some searching, i come across the mvp fix thread. So i lifted the 510 pin up, and removed the extremely fragile (and crap) insulator/o-ring. I am a bit stuck for spares so i sliced down a kanger rubber grommet (large side) placed it underneath, and pushed the pin back down.

Its now firing but only with ego connector. But its working! [emoji1]

Did a search and thought this might help............

Quote Originally Posted by aznnp77 View Post
I got the circuit spacer from Madvapes. Cost me $20 in crappy juice cuz I didn't want to waste paying shipping for that small little thing. It worked, but it didn't work very well. My MVP was definitely firing weaker, and the spacer fell out when I tip it sometimes. I knew it would get lost one day and haven't used it since. It's a very easy repair. Just go to Lowes or Home Depot and go to the faucet accessory section and grab #60 O-ring. Use a small, but sturdy screwdriver to pry up the center pin. Use the same screwdriver to pry up the old O-ring (my old one wasn't even torn). The put new O-ring on and push the pin back in, trying to keep it centered. It's been firing without issues ever since. This is a permanent, yet not completely perfect fix, since you have to find a sweet spot in tightness to get it to fire well.