I saw one today that some one put an DNA 40 temp board in....
H Jamie, please remember that you are using dual-coil atomizers. A 1.5Ω dual coil atty is really two 3Ω coils configured in parallel; the 1.8Ω dual coil atty is really two 3.6Ω coils.
So, a 3Ω coil at 4 volts (I'm not sure what your battery actually outputs--this number is just an example) will give you 5.3 watts; a 3.6Ω coil--4.4 watts. I usually vape my stock dual coils at 4.2-4.8 volts, depending on the device, the juice I'm using, air flow etc.
If the lowest working voltage on the iStick is 4.2v, you can certainly use any stock dual-coil atty safely. You just have to be more careful with single coils; for instance, any 2.5 and up single coil (T3S, eVod, ProTanks 2) will work great and and is still within Kanger's recommended wattage (5-7.5W). You'll have to very careful with 2.3-2.4Ω coils--you may encounter very unpleasant dry hits. I wouldn't recommend anything lower than that (1.8 or 1.5Ω).
More on the subject--if you're interested:
http://www.e-cigarette-forum.com/fo...609427-i-perfer-single-coil.html#post14281416
Hope this helps.
Good luck.
I saw one today that some one put an DNA 40 temp board in....
Havent been here in a while but I have a general question to all that frequent this thread. I see that many like the nautilus mini as a topper but Im looking for something even slimmer.
Of the very slim glassomizers available, which ones work well ( great flavor, good vapor, least amount of leaking and dry hits) with the istick? I purchased another one so they need some toppers, just been dripping so far.
So, yay or nay on Aspire k1, Aerotank mini, Genitank mini (same but diff airflow), or protank mini's. Do BVC's such as the Aspire K1 do well, and how do dual coil heads compare?
Thanks so much for any help provided, Im a broke chick so I have to narrow it down!
Havent been here in a while but I have a general question to all that frequent this thread. I see that many like the nautilus mini as a topper but Im looking for something even slimmer.
Of the very slim glassomizers available, which ones work well ( great flavor, good vapor, least amount of leaking and dry hits) with the istick? I purchased another one so they need some toppers, just been dripping so far.
So, yay or nay on Aspire k1, Aerotank mini, Genitank mini (same but diff airflow), or protank mini's. Do BVC's such as the Aspire K1 do well, and how do dual coil heads compare?
Thanks so much for any help provided, Im a broke chick so I have to narrow it down!
Havent been here in a while but I have a general question to all that frequent this thread. I see that many like the nautilus mini as a topper but Im looking for something even slimmer.
Of the very slim glassomizers available, which ones work well ( great flavor, good vapor, least amount of leaking and dry hits) with the istick? I purchased another one so they need some toppers, just been dripping so far.
So, yay or nay on Aspire k1, Aerotank mini, Genitank mini (same but diff airflow), or protank mini's. Do BVC's such as the Aspire K1 do well, and how do dual coil heads compare?
Thanks so much for any help provided, Im a broke chick so I have to narrow it down!
I replaced original bases that came with my PT2s (regular and mini) with Kanger airflow control ones and I really like the results, They let me regulate the airflow from very tight to wide open.
Kanger Air Flow control Valve Base Replacements
This one came with my mini Aerotank and I ordered an extra one for my PT 2 mini:
Kanger Airflow Control Valve - Mini V3
Love my Aerotanks. Genitanks are just like Aerotanks, but are not made of stainless steel. Functionally, they should be identical--AFAIK.
Hi Zelphie!
