I check for that since I'm paranoid about it. Don't want to fry chips or anything. 
Eleaf Istick
- Thread starter AnsonJames
- Start date
- th_trl_thread_readers 0
-
- Tags
- eleaf istick istick
- Status
I've got the Atlantis enroute but didn't buy it for the istick. Have other mods that need love too.
Sent from a BIG phone.....Galaxy Note 3
With the Nautilus on as I was mentioning earlier on the thread I am able to turn things up a bit while with the Tumbler I have to settle for a 12w max and usually lower to keep the coils at a cooler temp since those will wear out sooner where you get the burnt taste. I tried the Smok T-Dux 4.0 and ran into the same problem where I replaced the coils on three of those. Yet the Nautilus hangs in there but for the performance on the little guy you can't flip it down to be able to make it compact to carry like the Tumbler or Nautilus mini which will be the next item on the shopping cart list. The Kanger Aerotank mini tanks love to leak and won't work as another option as I found.
I check for that since I'm paranoid about it. Don't want to fry chips or anything.
If you're refering to leaking onto the post, try the adapter that comes with some. It seems to be sealed so it doesn't get down there.
This thing is awesome! Still learning some of it, definitely going to have to lower the nic level, I'm getting pretty jacked off this 18mg.
Almost all my juice is 80/20 or 70/30 PG/VG, getting a pretty good TH with that @ 4.7V.
Had to step down the airflow a notch from wide open on the Nautilus Mini.
Sweet little kit and the bending adapter looks great on it.
Big
from me!
Almost all my juice is 80/20 or 70/30 PG/VG, getting a pretty good TH with that @ 4.7V.
Had to step down the airflow a notch from wide open on the Nautilus Mini.
Sweet little kit and the bending adapter looks great on it.
Big
from me!
Different vendors may be different, but one of the two iSticks I purchased was just the "simple" option (or whatever the non "full kit" option is), and I DID get both the beauty ring and 510/EGO adapter...just no wall charger and USB cable. It came in an eLeaf box, but was much more simple cardboard, so it appeared to be legit packaging, just not as nice as the "full kit'. Honestly, if you don't need a charger it may be worth saving the $3.
I have a Genny that likes to sweat. (It eats o-rings if you tighten it too much), so I check out of habit.
That was the way the second came in from the second of two vendors when the first was found sold out when going back right after examination of the first. The first came all in one larger box while the second was the battery alone box with everything else wrapped in bubble wrap. After the first full kit the only two things you would need would be the ring and 510/eGo adapter while you could always use any other. The one included however has the side thumb wheel part for getting that on and off easier.
I just got my eleaf bendy adapter in the mail today. It definitely feels like it would fix thread issues, so that's good. But for anyone thinking of buying one more for fun like I did....eh. The tank has a bit of a tilt now, and I just can't see myself ever folding it for my pocket.
I got it more as a backup plan, if any of my 3 sticks have the thread issues, but probably won't use it until then. Just my two cents.
I got it more as a backup plan, if any of my 3 sticks have the thread issues, but probably won't use it until then. Just my two cents.
What ring are you guys talking about?
I got the full kit and it came with the Battery, AC plug, Cord and the 510/eGo adapter.
No ring in this box.
I got the full kit and it came with the Battery, AC plug, Cord and the 510/eGo adapter.
No ring in this box.
I was thinking about tanks on order with some finally updated as far as tracking coming in tomorrow when saying that unfortunately. That would be the beauty rings or thread covers you get with 510 threaded tank kits.Those cover over the exposed eGo threading with usually a cone shaped eGo threaded ring that acts as a cover also making things look better.
Good to know that. I ordered one just because of a sale and I wanted a case anyway, but I doubt I will use the adapter much. I haven't had any thread issues. I have 2 sticks so I can put it on 1 and see if I ever use it. Just more junk.
It doesn't. Some are using a "beauty ring" to cover the ego adapter outer threads, if they are using the adapter to protect their istick threads.
Here I use the 510/eGo adapter for the Tumbler tanks which are eGo threaded since with the bracket on you have a spring loaded contact and don't thread into the connector on the mod itself. I use an adapter on other APVs as well to avoid the need of having to remove and put back and remove again the covers you see on a Vamo or Smoktech ACE where once the plastic cap is off the edge around the top of the alumimum body is a bit sharp since they didn't want any 45 degree chamfering around the top but fit flush against the cap for overall appearance.
The Nautilus tanks work great even down at 7w for the menthol flavors while those will be going on other mods once those come in. Plus the Nautilus mini will likely be one of the best options for a 2ml size tank.
Yeah, I don't know how it gets so complicated, or why I am still reading this thread! It just works.
- Status
