Eleaf Istick
- Thread starter AnsonJames
- Start date
- th_trl_thread_readers 0
-
- Tags
- eleaf istick istick
- Status
I was expecting my Origenny yesterday but it will be next week now, and those FEV's are really looking like a great atty. I know both will leak if turned upside down or on their sides, but knowing this ahead of time shouldn't cause any surprises with use...
I really want a Silverplay, but vapordna is always out of stock on the very rare occasion I have had the spare cash to get one and vape gear does not have a high WAF in my world.
Enjoy your Subtanks good sir and thanks for the info.
Origen Genesis is easily my favorite of the Genesis atomizers I own, and makes it to my top 10 favorites. FEV 3, and the FEV VS are in my top 5. Especially like the VS, use it daily, so easy to build, and rewick. I've never had any issues with leaking on either of the FEV atties, they go in my pocket, and get laid on the side all the time. The only thing I really don't care for is the size of the FEV 3, though it isn't so bad in something like the Kato Box. I do wish the VS fit in my Microstick, might try it with a Gizmo, or the Phantus, until then I use it daily on my istick 30.
In the same boat as you on the Silverplay, every time I catch them in stock, no $$ to spare, So I ordered a Youde Goliath to play with.
Origen Genesis is easily my favorite of the Genesis atomizers I own, and makes it to my top 10 favorites. FEV 3, and the FEV VS are in my top 5. Especially like the VS, use it daily, so easy to build, and rewick. I've never had any issues with leaking on either of the FEV atties, they go in my pocket, and get laid on the side all the time. The only thing I really don't care for is the size of the FEV 3, though it isn't so bad in something like the Kato Box. I do wish the VS fit in my Microstick, might try it with a Gizmo, or the Phantus, until then I use it daily on my Istick 30.
In the same boat as you on the Silverplay, every time I catch them in stock, no $$ to spare, So I ordered a Youde Goliath to play with.
Side by side is my favorite configuration but lot of limits. Like to see a small variable SBS
Nice Kato set up! Same here on the microstick. What size is that in the Kato? Do you know which Kangers fit the Kato? Aerotank mega? or the Aerotank V2? Thanks....
Will do. Thanks Bike.
if you want it real tight and the screw is at the top, roll a little ball of paper and stick it on the hole. Preferrably toilet paper that degrades when washed. This will tighten your draw without any permanent damage.
Side by side is my favorite configuration but lot of limits. Like to see a small variable SBS
Its an 18650, 23mm is its limit, both of the mentioned Aerotanks should fit fine. I mainly bought it just for the odd sized 23mm atties, only 23mms I have that won't fit are the Taifun GT, GT2 (fits with AFC ring removed), all my other 23mm fit fine.
The Phantus, and Gizmo will do 23mm as well, and adds a bit of stealth with 18350. Ministick may be an option, will do up to 23.5mm so the Taifuns should fit in it, can also get the 18500 Extender for it.
So many memories! Thanks for the reminder
Memories is right. We listened to this on 8-track in my livingroom.
I can remember staying up til midnight to hear it a couple days before they actually released the album.Memories is right. We listened to this on 8-track in my livingroom.
Good album!
ACK ACK ACK. It's GOOD to think in Acks, Bikerz!
Speaking of which, Troll.... you used a few. Are they on the list? I do recall seeing "FEV" but not for one minute can I remember what that is.
The wonderful devices below are FEV's (Flash E Vapor) RTA's so you could add FEV to your list if it is not already there.
Thanks for the info ccwaters!
Everyone I talk to who has an FEV just loves them, I want to pick up the Hotcig version of the V3 and VS as the authentic ones are out of my budget. I had read a few times that it isn't really pocketable, but if you pocket them all the time, then that makes it that much better! The VS will go on my Kangertech iPOW2 and the V3 would share time between the iStick and IPV2s.
The Goliath looks to have some great features, so that will be another RTA I'll end up wanting... Especially if my friend with the Goblin picks one up...
Could I get you to list your top 10 atty's since the Origen and FEV's rank so high?
The VS in a Microstick would be a sweet stealth rig, I have always liked the look of the GP Spheroid on a Microstick.
Last edited:
Memories is right. We listened to this on 8-track in my livingroom.
In reality, I'm a tad younger, 52nd Street was my first Billy Joel record in 78... But boy, I loved every single record of him!
Back to subject... with a 1.6 ohm rebuilt head, at 9.6w, the iStick 30 came around full 24 hours, and it's still 2/3 full. Conditioning the battery and meter worked out great, I'm not topping off until it goes completely empty... Tomorrow mid afternoon perhaps? 36 hours?
Well, I'm a bit younger too. We had a few of his albums on 8 track and several vinyl, but 78 was the year I discovered music.
And to also get back on topic, I'm very jealous to all the convo on the new tanks everyone is enjoying. I just don't enjoy rebuilding. I tried and couldn't get the hang of it. And one by one, all my subtanks are starting to leak. Can't figure it out. Not really feelin' the SMOK VCT or Melo tanks and don't know what to try next.
But the subtank did spoil me for Aerotanks now so can't see going back. I need lots of airflow to be a happy vaper.
But the subtank did spoil me for Aerotanks now so can't see going back. I need lots of airflow to be a happy vaper.
I know it may be a little early for me to nudge people to grab a GS AIR, because I've only been using it for a day however, if you like a lot of air flow, this is the ticket to that. No gurgling either so far and it puts out a lot of flavor also! Hope this helps. If not, good luck in finding your happy medium emm!
What subtank do you have. I have been thinking of trying a Nano. I just love the Protank 2 so much with the air valve . I have enough parts to rebuild coils for years. Even bought glass and seals to last for years.
- Status
