ePipeMods Fully Custom Made Wood E-Pipes - Part 2

[Fesso]

I did the same stealth vaping through the hobbit 3 times now!
And I hadn't thought about the frodo/Elijah over dramatic thing until you mentioned it.
He was a bit of a pansy in the role hehehe.
You're right though Martin freeman is doing a killer job.
With him cast as bilbo and just like the hobbit as a story better, I knew the hobbit would be a better movie.
Can't wait to see the Benedict cumberbatch Smaug!

Have you seen Benedict Cumberbatch and Martin Freeman as Sherlock and Watson in the BBC's Sherlock? Awesome show! You should check it out if you haven't seen it yet.
Sherlock (TV Series 2010– ) - IMDb

Sherlock smokes a pipe so we are still on thread topic...hehe

 

[MistBusterMatt]

Have you seen Benedict Cumberbatch and Martin Freeman as Sherlock and Watson in the BBC's Sherlock? Awesome show! You should check it out if you haven't seen it yet.
Sherlock (TV Series 2010–.) - IMDb

Sherlock smokes a pipe so we are still on thread topic...hehe

Yes and fricken awesome by the way.
I have often wondered how to get a pipe into that show.

 

[shawnski]

can anyone identify my pipe it has that engraved signature on the bottom, im pretty sure it is an epipe mod.
also i need help pimping this bad boy out, someone said i will b needing one of those cherry vapes universal drip tip, also where can i get some cool long stem tips for the pipe, what type clearos work on the pipe and whatt peices will i need to use it, any suggestions for this is greatly appreciated, also i am looking for the photos of the steampipe costume party is that on this thread... shawnski

 

[siampumpkin]

can anyone identify my pipe it has that engraved signature on the bottom, im pretty sure it is an epipe mod.
also i need help pimping this bad boy out, someone said i will b needing one of those cherry vapes universal drip tip, also where can i get some cool long stem tips for the pipe, what type clearos work on the pipe and whatt peices will i need to use it, any suggestions for this is greatly appreciated, also i am looking for the photos of the steampipe costume party is that on this thread... shawnski

How about a picture or two?

 

[Fesso]

can anyone identify my pipe it has that engraved signature on the bottom, im pretty sure it is an epipe mod.
also i need help pimping this bad boy out, someone said i will b needing one of those cherry vapes universal drip tip, also where can i get some cool long stem tips for the pipe, what type clearos work on the pipe and whatt peices will i need to use it, any suggestions for this is greatly appreciated, also i am looking for the photos of the steampipe costume party is that on this thread... shawnski

Pics would be needed to tell if it's an epipemods pipe. I am not certain but I think all the signatures would be on the side of the pipe and they look like a leaf. The sigs have only been around for about 4-5 months so if it is an epipemod it will have a 510/eGo connection, you can put any kind of Clearomizer on it. I like the Kanger T2's but there is a pipe clearomizer on the epipemods website for a good price that I have been meaning to try out - this is hardly a "pimp" set-up though.
Because of the 510 connection you can add pretty much any fancy atomizer you like from genesis to penelope/oddy. You will need a cherry vapes universal adapter for the stem no matter what atomizer you use.
The churchwarden stems on their site are long and should be back in stock soon.
http://www.epipemods.com/pipe-supplies.html
There are some great Galleries on their facebook page, you can see if your signature matches there.
https://www.facebook.com/EPipeMods?fref=ts

 

[shawnski]

thanks fesso, here is the sig on the bottom and here is the unit..... thanks for the help, i really love the pipe , its a style all its own, it has its own attitude,swagger, and style.......... can i get some suggestions on what clearos or attys that would best suit my pipe, also can i get the name ,identification of the pipe.. thanks for all the help ......

 

[dirquist]

View attachment 165947View attachment 165948 thanks fesso, here is the sig on the bottom and here is the unit..... thanks for the help, i really love the pipe , its a style all its own, it has its own attitude,swagger, and style.......... can i get some suggestions on what clearos or attys that would best suit my pipe, also can i get the name ,identification of the pipe.. thanks for all the help ......

Ya, thats Matts sig on the bottom there so it is a ePipeMod. The style is called a Dragon. Matt will have to let you know the wood type or the name it was or was not given. You can use essentially whatever you want. I personally think it would look stellar with Penelope on board.

 

[Fesso]

View attachment 165947View attachment 165948 thanks fesso, here is the sig on the bottom and here is the unit..... thanks for the help, i really love the pipe , its a style all its own, it has its own attitude,swagger, and style.......... can i get some suggestions on what clearos or attys that would best suit my pipe, also can i get the name ,identification of the pipe.. thanks for all the help ......

That's an epipemods, I am pretty sure it's a "Dragon"
If it were me I would put a bliSS rebuildable atomizer or some other genesis: DID, CHID, Zen, Hellfire, Cobra. I would go that route because of the pipe's size and the fact that it will stand up even with the Genny weight on it and you won't have to worry about leaking. I would go with with a nice Peterson stem (comes with the universal adapter) They will be available again soon but it looks like you already have one or is that the one you just sold?

Any clearomizer on that pipe will look dwarfed. you could try this one:
Pipe Clearomizers - Atomizers and Cartomizers - Pipe Supplies- Batteries, Atties, Stems, Chargers, etc.
But a Big pipe will look good with a big atty!

My favourite pipe set-up right now with a stem is the Phoenix RBA with a Peterson. But that's on a regular sized pipe not a Dragon.
If I had a big battery pipe that stood up I would keep my bliSS on it.

Also you should also order a "bell cut cone" to cover the eGo threads and transition the pipe to atty (especially a Genesis)
Bell Style Silver Cut Cone For Tanks - Pipe Care and Accessories - Pipe Supplies- Batteries, Atties, Stems, Chargers, etc.

 

[MistBusterMatt]

It's a dragon, not sure what it's name was... But I know it is Brazilian cherry.
I agree with fesso and dirquist, dragons are made for tanks. And a dress cone, and your choice of stem will set it of.

 

[shawnski]

Thabks dirquist, fesso and matt, your help is very much neeeded and apreciated, does epipes sell red velvet robes and slippers to go with the pipes.....

 

[MistBusterMatt]

Working on it
Really though, I am

 

[siampumpkin]

It's a dragon, not sure what it's name was... But I know it is Brazilian cherry.
I agree with fesso and dirquist, dragons are made for tanks. And a dress cone, and your choice of stem will set it of.

I believe it is called the Dark Tower but I may be incorrect. No sure on the wood, but it's a sweet pipe!

 

[Dusty_D]

Katie's having trouble finding a fat englishman to model them.. that, and one who uses a monocle!

 

[shawnski]

A dark tower....

 

[dirquist]

Ok, not sure why I did it but I rebuilt one of those clearos tonight. I guess it was because it died in what I consider to short a time. It tasted burny real bad.

The plastic tube is just press fit in the black shroud. Inside is a little cup very similar to all the others Ive seen. It is wrapped/insulated by some cotton like material and then by a metal mesh type material. I dont think it is metal but I dont know what it is. The coil is direct soldered to a couple wire leads. I broke the original wire off of the lead. I wrapped a new coil around a new piece of wick. Then I stripped the leads and twisted the new coil wire (used 36g) to the leads and made sure they were inside the cup. Im amazed it didnt short. Then I put the wicks up inside the tank (hardest part of all) and filled it up. Its working perfectly but Im not sure Id bother to do it again.

Here it is re-wicked. This is an at your own risk procedure. Really, not sure Id bother to do it again.


IMG_2596 by pseudohippy, on Flickr

 

[Whitzend]

Great looking pipes guys!

Where are you getting the blanks for the elementals? The acrylic and wood fusion is incredible. I turn stuff for fun and some pepper grinders out of that would be awesome!

 

[Fesso]

I keep telling people that stems are coming soon.... Am I correct?

 

[shawnski]

Well I had a bad day, dropped my new pipe now the connection is popped loose and on top of that it won't fire, can anyone. Help me, who can I get to fix this, all help apreciated

 

[shawnski]

I also would like t buy a new. One prefferably one that can stand with a lite carto tank, any suggestions, I like the draggon and gandalf styles, what are the models called with the safety switch in it

 

[dirquist]

I also would like t buy a new. One prefferably one that can stand with a lite carto tank, any suggestions, I like the draggon and gandalf styles, what are the models called with the safety switch in it

They all have the safety switch in them as should yours. Hard to tell which ones will stay standing just by pictures but many of them have pics of it setup and Id assume if it can he probably took a pic of it. But you could just call or email the shop and Im sure they could tell ya. Or take the product photo from the site and post it here to ask Matt. Or the Facebook page is probably the best place.

EDIT: Ooops, almost forgot your prior post. Just contact Katie through the EPM site or Facebook and she will arrange to send it back and let you know any costs associated.