Esterigon official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
I think what's important to mention here is that in today's highly competitive market with such a big influx of cheap Chinese knock off's people should really be careful what they buy.
I was looking through eBay and the amount of cheap knock off VW devices like the Hana mod is crazy. As you can imagine these are all cheaply made devices, probably never even tested, using dubious materials. They are selling like hot cakes and frankly I think fellow vapers are taking big risks using such devices and especially for sub-ohms.
I was looking through eBay and the amount of cheap knock off VW devices like the Hana mod is crazy. As you can imagine these are all cheaply made devices, probably never even tested, using dubious materials. They are selling like hot cakes and frankly I think fellow vapers are taking big risks using such devices and especially for sub-ohms.
I was done after the Evic. That POS broke just after a couple months. Now I know what to look for in quality, and GG is one of them.
Thank you, Sad Society and CaptSteve, for a very informative and relevant discussion. 
This is great information! Thank you so much for your in-depth replies, particularly Sad Society. I really appreciate the knowledge shared
Later today I will buy an atomizer. I'll try it without a Kick first, since it is the cheaper option, and I'll post my thoughts on the subject after I've had a chance to try it out, coming from an evod user.
I have two vendor bought juices; T-Juice's "TY-4" 80/20 PG/VG and Suicide Bunny's "Mother's Milk" which I think is VG, although to be honest, i can't tell the difference by looking at them. I expected VG to be a lot more viscose, for some reason. Anyway, presuming it is VG, given Sad Society's information it will be interesting for me to see how a particular ohm coil performs with each. Thanks again everyone for some great advice!
Edit: Mother's Milk is 70/30 VG/PG
Later today I will buy an atomizer. I'll try it without a Kick first, since it is the cheaper option, and I'll post my thoughts on the subject after I've had a chance to try it out, coming from an evod user.
I have two vendor bought juices; T-Juice's "TY-4" 80/20 PG/VG and Suicide Bunny's "Mother's Milk" which I think is VG, although to be honest, i can't tell the difference by looking at them. I expected VG to be a lot more viscose, for some reason. Anyway, presuming it is VG, given Sad Society's information it will be interesting for me to see how a particular ohm coil performs with each. Thanks again everyone for some great advice!
Edit: Mother's Milk is 70/30 VG/PG
Last edited by a moderator:
Kotso dont worry my friend i will have all the parts here
I will have even Imeo in the shop
every woman can rent him for a weekend But i have to inform you he is a very crazy boy !!!
...... i will have all the parts here
I will have even Imeo in the shop
But i have to inform you he is a very crazy boy !!!
axaaxaaxaaxaxaxaxaxaxaxa
Not really sure what happened but could be because the mod fired for about a minute with a .6 ohm atty because i didnt locked it.had also some problems with the button to adjust it the right way because sometimes it got loosen up a bit.not realy sure...but i definitiv e need spare parts because i also damaged the bottom oring
o-ring keeps button steady, so if you damage it you have enough problems kotso. Better buy a plastic and 2-3 orings to be sure.
I still dont understand what happened because I have pushed esterigon's button for about 5 mins and nothing happened.
Anyway, try esg for the spares you need and we talk again about this
I still dont understand what happened because I have pushed esterigon's button for about 5 mins and nothing happened.
Anyway, try esg for the spares you need and we talk again about this
Imeo i think 1 minute on 0.6 ohms would do that. That's like 6 - 7 amps for 1 minute. Good thing nothing more serious happened. Always check your connections and never leave the device unlocked unattended.
I understand that the plastics used is Delrin ( Dupont ) well, poliacetal , right ?
specs says that can be used in short periods at 135º C . Fusion point at 175º C . Like Aal said with 0,6 ohm not to long to reach that point.
Button is really soft , which I absolutely like , but as Aal said we should pay attention and lock the device specially before we keep in pocket or pouch.
specs says that can be used in short periods at 135º C . Fusion point at 175º C . Like Aal said with 0,6 ohm not to long to reach that point.
Button is really soft , which I absolutely like , but as Aal said we should pay attention and lock the device specially before we keep in pocket or pouch.
7 amperes cant cause something like this guys. The brass pin is very fat and doesnt have any resistance so it doesnt get hot. Something else happened
Last edited:
- Status
