Esterigon official

[steliosss]

I never understood why so much fuss for voltage drop!
And as other members in here have said... who cares if you have to change your battery eg 10 minutes earlier if you vape for 5 hours.
Of course I'm not talking for huge differences.
Anyway.. I "feel" Esterigon better than any other mechanical mod I ever used... even better than my everyday GGTS with no spring on axis and magnets in button.

 

[steliosss]

aaaaaaaaaaaaaaaahhhh... where is Captain?????.... where is Captain?????.... where is Captain?????....

 

[Itshak]

I never understood why so much fuss for voltage drop!
And as other members in here have said... who cares if you have to change your battery eg 10 minutes earlier if you vape for 5 hours.
Of course I'm not talking for huge differences.
Anyway.. I "feel" Esterigon better than any other mechanical mod I ever used... even better than my everyday GGTS with no spring on axis and magnets in button.

no need to add JGGTS to the episode.

they are on total different level of versatility,and can't be realy compared to any other
on the market.

voltage drop is only one of many reasons,and not one I take to account.
GG Telescope are like nothing els. if you agree Steliosss

reivews are only opinion and not Institute of Standards permit!!

I remeber one that didnt like the Ithaka so much .... so ??? you all know how many
I have of those!

I say to all enjoy the new Esterigon beast and do tell what you like and why.

now better to post more pictures for the home viewers guys,
befor next batch of TS's is coming

 

[imeothanasis]

something else about esterigon. Even if it has 2 springs inside it, they are inside of special spring loaded applications that dont allow any voltage drop. But the main thing is that esterigon is one solid unit.

Making mods with a semi threaded cap to meet battery, its obvious that not a serious option. Its a extemporaneous design. If we want to be serious, we have to make serious constructions too.

If semi-threaded caps were ok then we could put 2-3 semi-threaded caps and tubes in series and make a whole e-cig like this.

 

[monkkx]

What's the voltage drop when it's not tightly screwed, that I poor juice on the connections, and assemble it with fingers covered of Vaseline?

 

[imeothanasis]

the usual voltage drop that every mod has when its dirty mon or not screwed well. No one knows. It depends on the level of dirt and how bad tubes are screwed each other

 

[monkkx]

You're too upset to detect irony Imeo do not worry too much, word to mouth will make the success of your new mod. It can't be otherwise

 

[Aal_]

Guys, give me few hours, I will try to give you objective tests today with different resistances.

 

[CaptSteve]

Congrats buddy she's looking beautiful with the ESG iatty.

hmmmm what do we have here ????


































Guys I am glad that imeo went with the 18500 size. The form factor is just right in your hand. Of course I will use the 18650 tube for long trips .

Guys this device is waay more beautiful when you see it live. No time to play with it now getting back to work

 

[imeothanasis]

I thought it was a serious question because I didnt see any smilies mon.

sorry buddy

You're too upset to detect irony Imeo do not worry too much, word to mouth will make the success of your new mod. It can't be otherwise

 

[JMBH]

It's like Christmas today ! Got package from ESG . Fedex was here early this morning , just after i posted here that it was on its way . After that went to local post office and what a coincidence , got package i was waiting with koh gen do cotton I ordered two weeks ago.
So I couldn't wait ! Cleaned contacts of esterigon as Imeo suggested , setup penny v3 with the new cotton and field up with the ESG vg juice I bought for testing . All perfect !!! Esterigon is much better then I even expected . Beautiful , balanced and wonderful button , I was already tired of front button system I was using . Thanks Imeo , Thanks ESG and Thanks Aalwani for the cotton info.
Imeo .. only thing I'm concerned about esterigon is about threads . With out the battery , threads are smooth but ones i stack the batteries , either 18490 or the 18350 ( AW imr ) threads get really scratchy and hard , seems that the springs push really hard I guess .
I guess they will smooth in time , but really hard now .

 

[AdamAnd]

I thought it was a serious question because I didnt see any smilies mon.

sorry buddy

The Esterigon looks great mine is on the way. Imeo do you ever sleep? I think you should start a trade in program I have two GGTS to trade in for Penelope v3 LOL You can recycle the Stainless Steel can't you. Just a Joke have a good day and word of mouth like mentioned above is the best advertising you will ever get.

 

[imeothanasis]

Congratulations JM, I am very glad that you got it and works as you expected. As for the threads, I have mention this in one of my videos. Threads are very smooth but when you put battery they become harder just because of the strong springs inside the spring loaded applications, exactly as you said. If we really want to have serious electrical contact we need strong springs and not brass ones that are very soft and dont have springless ability

It's like Christmas today ! Got package from ESG . Fedex was here early this morning , just after i posted here that it was on its way . After that went to local post office and what a coincidence , got package i was waiting with koh gen do cotton I ordered two weeks ago.
So I couldn't wait ! Cleaned contacts of esterigon as Imeo suggested , setup penny v3 with the new cotton and field up with the ESG vg juice I bought for testing . All perfect !!! Esterigon is much better then I even expected . Beautiful , balanced and wonderful button , I was already tired of front button system I was using . Thanks Imeo , Thanks ESG and Thanks Aalwani for the cotton info.
Imeo .. only thing I'm concerned about esterigon is about threads . With out the battery , threads are smooth but ones i stack the batteries , either 18490 or the 18350 ( AW imr ) threads get really scratchy and hard , seems that the springs push really hard I guess .
I guess they will smooth in time , but really hard now .

View attachment 347142

View attachment 347144

 

[JMBH]

With 18350 tube

 

[JMBH]

Congratulations JM, I am very glad that you got it and works as you expected. As for the threads, I have mention this in one of my videos. Threads are very smooth but when you put battery they become harder just because of the strong springs inside the spring loaded applications. If we really want to have serious electrical contact we need strong springs and not brass ones that are very soft and dont have springless ability

Ok Imeo , I supposed that . But I already found my way , Just push slightly will threading , thats the trick

It's Perfect Imeo ! The more i inspect all parts , the more I like . Very satisfied ! Congratulations Imeo !!!! thanks again

 

[imeothanasis]

Thank you JM
Thats exactly what I do too. Screw and push a little at the same time

 

[JMBH]

Thank you JM
Thats exactly what I do too. Screw and push a little at the same time

Exited like a teenager with a new iPhone

 

[Bishopheals]

Lets see them guys Raise your esterigon loud and proud.
I have to get me a few more to add to my collection. before Fluid Vapor runs out.

Mmm Chai Tea

feel free to post your pics here and on facebook. So we can share with the other GG family that don't have access to ECF.
https://www.facebook.com/groups/1422014418049832/1444197922498148/?notif_t=like

 

[Aal_]

Congrats buddy she's looking beautiful with the ESG iatty.

Thanks buddy!

 

[RiverNut]

seek, the voltage drop is a silly matter to my opinion too but its 0,15 volt with a 1,5 ohm atomizer. Is there a mod with less voltage drop and I dont know it? ok, I will try to make another video about voltage drop just to show you that esterigon is the best on this field too

yes, voltage drop is a silly matter, and most users know this Imeo, don't waste your time trying to prove anything on this. We need you designing the new atty for this mod