Esterigon official

Status
Not open for further replies.

Anon63

Full Member
Apr 10, 2013
45
172
UK
esterigonandfamily002_zpsfdae9755.jpg

I'm over the moon.
 

Aal_

Vaping Master
ECF Veteran
Verified Member
May 5, 2012
7,077
18,611
Toronto
By the way having plated contacts doesn't allow for extensive cleaning like imeo did because you ruin it instead of cleaning. So i think non plated contacts are better on the long run. And that's what imeo has been saying.

And by the way if you look at how mods are evolving, they are removing features to accommodate for performance. Like the latest fashion now atomizer directly on battery without pin. A mod that consists exactly of 3 parts. It is becoming ridiculous. You can create a mod with 2 thick wires soldered to your battery.

I do believe performance is important but when it is good enough and still not satisfied i either build a lower ohm coil or just go regulated.

With a mechanical mod I care about looks quality features size and performance. The best mechanical mod is one that can balance all of these above a certain threshold. And esterigon just did that.

Does it have the best performance? No
Does it have the best performance between mods that share the same quality ingenuity features ease of use elegance size and beauty? Hell yes, it has a great performance that is a breakthrough with all what I mentioned!!!

Let's face it the best performing mod that gives 0 drop is the ugliest well because it is just 2 wires!!
 
Last edited:

Itshak

Ultra Member
ECF Veteran
Verified Member
Sep 11, 2013
1,743
3,631
Israel
thank you Its:)
It was tilemahos


Wow!

What a nice looker.
I ran the video some 10 times and stop it in many pose,
that a real nice looking device Imeo.

Wish we could see it strait on the Esterigon without the measurement device lol
the way I saw it,that will look out of chart combo.
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
I totally agree aal. And about performance: Do you think that the user understands the difference of 0,05 volts? If a mod has a drop at 0,05 (almost impossible) and another one has a drop at 0,1 (very difficult), is that something that makes any difference for the user? Even the usual multimeters we use at home dont recognize this difference. The only difference is that the mod with a drop at 0,05 will not have any features, exactly as you said.
By the way having plated contacts doesn't allow for extensive cleaning like imeo did because you ruin it instead of cleaning. So i think non plated contacts are better on the long run. And that's what imeo has been saying.

And by the way if you look at how mods are evolving, they are removing features to accommodate for performance. Like the latest fashion now atomizer directly on battery without pin. A mod that consists exactly of 3 parts. It is becoming ridiculous. You can create a mod with 2 thick wires soldered to your battery.

I do believe performance is important but when it is good enough and still not satisfied i either build a lower ohm coil or just go regulated.

With a mechanical mod I care about looks quality features size and performance. The best mechanical mod is one that can balance all of these above a certain threshold. And esterigon just did that.

Sent from my SM-N9005 using Tapatalk
 

Aal_

Vaping Master
ECF Veteran
Verified Member
May 5, 2012
7,077
18,611
Toronto
I totally agree aal. And about performance: Do you think that the user understands the difference of 0,05 volts? If a mod has a drop at 0,05 (almost impossible) and another one has a drop at 0,1 (very difficult), is that something that makes any difference for the user? Even the usual multimeters we use at home dont recognize this difference. The only difference is that the mod with a drop at 0,05 will not have any features, exactly as you said.
I added a paragraph when edited while you were writing :D

Sent from my SM-N9005 using Tapatalk
 

imeothanasis

Unregistered Supplier
ECF Veteran
Feb 13, 2009
47,882
34,510
Athens, Hellas
gg-goldengreek.com
Wow!

What a nice looker.
I ran the video some 10 times and stop it in many pose,
that a real nice looking device Imeo.

Wish we could see it strait on the Esterigon without the measurement device lol
the way I saw it,that will look out of chart combo.

its a great combo Its. Its unshined of course but I can take a picture to show you how it looks on esterigon. Its one solid piece like hybrid even if tilemahos can be attached on any device out there.
 

Itshak

Ultra Member
ECF Veteran
Verified Member
Sep 11, 2013
1,743
3,631
Israel
its a great combo Its. Its unshined of course but I can take a picture to show you how it looks on esterigon. Its one solid piece like hybrid even if tilemahos can be attached on any device out there.

Oh That will be great,please do Imeo.
It's look like with Esterigon flash CR this will be the best looker elegant unit.
With so many extra feature behind a simple classic look.
 
Status
Not open for further replies.

Users who are viewing this thread