Esterigon official
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
Somebody needs to get him a Tilemahos asap!
Also show him the matted finish tubes.
Overall, nice review. It's the button!!
So Imeo, when should we see a Tilemahos picture show, I got my popcorn ready.
Oh Scott, I wish you read this:
1- few hours ago brushed tubes were put for sale, I hope you got/will get one
2- I think the word you were looking for about springs is "they have the tendency to collapse". Imeo made these specific springs which are weird and well thought if you take a look at his videos you would understand what I mean. They are hard as hell I'm not sure what is the metal but I doubt it will ever collapse. Please someone try a 0.5 ohm coil. I will try to make one and test the springs but I doubt they will move lol.
3- regarding the 21mm i understand imeo's decision. He thinks it is better and I wish all of the previous modders who made atomizers thought the same. We are in a period where smaller and thinner is better so I understand where he is going and hopefully in the future everyone will follow his steps unless the bigger is better strikes again.
I really enjoyed the review the button is an enjoyment by itself and the locking mechanism is just creativity put to action.
Nice video Scott take care.
1- few hours ago brushed tubes were put for sale, I hope you got/will get one
2- I think the word you were looking for about springs is "they have the tendency to collapse". Imeo made these specific springs which are weird and well thought if you take a look at his videos you would understand what I mean. They are hard as hell I'm not sure what is the metal but I doubt it will ever collapse. Please someone try a 0.5 ohm coil. I will try to make one and test the springs but I doubt they will move lol.
3- regarding the 21mm i understand imeo's decision. He thinks it is better and I wish all of the previous modders who made atomizers thought the same. We are in a period where smaller and thinner is better so I understand where he is going and hopefully in the future everyone will follow his steps unless the bigger is better strikes again.
I really enjoyed the review the button is an enjoyment by itself and the locking mechanism is just creativity put to action.
Nice video Scott take care.
Last edited:
I dont think so buddy. I dont want atomizer to be connected directly with electronics
I concure with scott on one point: imeo need to make better quality videos/audio
Well, good notice at last after the disenchanted wanted day.
I lost the possibility of my first ggts waiting for buttons and just venting cap, but that I tell you on the appropriate place. Lost own present.
Back count star's again.
Thks.
I lost the possibility of my first ggts waiting for buttons and just venting cap, but that I tell you on the appropriate place. Lost own present.
Back count star's again.
Thks.
Time for some VapePorno:
For starters....... Am I unlucky, or what?
All of you are happy because you do have a perfectly made Esterigon.
And I envy you that.
Why? Because my Esterigon has a defect.
I mean the connection between Venting Cap and tuba.
In your Esterigon looks like this:
In my mod is as follows:
When I unpacked Esterigon, I did not seen this O-ring between the lower capem and tube.
Because someone the screwed it with great force.
Only after two days I was able to unscrew the venting cap.
Second, the internal (female) thread in tube 18500 is different than in the tubes 18350 and 18650.
Internal threads in tubes 18350 and 18650 are as shown in this video:
Such are the in my.
But the internal thread in tube 18500:
- at the one end the internal thread is made to the end of the tube.
- at the other end the internal thread is terminates around 1.5 millimeters from the end of the tube.
Why do I have only bad Luck?
Risto,
If i See it right, You just have to turn around your tubes. On Esterigon the tubes are Special, because they are Made a little different on bpth Ends. I had your Problem, But after turning arround the Tube all was perfect...
If i See it right, You just have to turn around your tubes. On Esterigon the tubes are Special, because they are Made a little different on bpth Ends. I had your Problem, But after turning arround the Tube all was perfect...
Last edited:
When I hear Scott talking about minor issues like diameter I really feel very happy lol
Thank you very much my old friend Scott, the review was just great! You mention almost all things that esterigon can do (except that you can turn button and poles so every time you have a new layer of contacts and also that button has adjustable path) but the rest of the review was fantastic
Aalwani was exactly right about the diameter issue. We will not make an 22mm device just because other atomizers that other modders make are at 22mm. If we can make a thinner device we have to go for it. If it was possible, I would have made an 20mm device. What I mean is that we cant follow what others do just because they cant make a thin device. Thats incompatible with my way of thinking.
Also mat tubes are already on esmokeguru site for sale as aal said again and of course Tilemahos that is an 21mm atomizer is coming in about 10-15 days I hope
Thank you very much my old friend Scott, the review was just great! You mention almost all things that esterigon can do (except that you can turn button and poles so every time you have a new layer of contacts and also that button has adjustable path) but the rest of the review was fantastic
Aalwani was exactly right about the diameter issue. We will not make an 22mm device just because other atomizers that other modders make are at 22mm. If we can make a thinner device we have to go for it. If it was possible, I would have made an 20mm device. What I mean is that we cant follow what others do just because they cant make a thin device. Thats incompatible with my way of thinking.
Also mat tubes are already on esmokeguru site for sale as aal said again and of course Tilemahos that is an 21mm atomizer is coming in about 10-15 days I hope
I concure with scott on one point: imeo need to make better quality videos/audio
But he was right about my esterigon on my video. Its brushed!
The thread stops because that is where the o-ring on the end cap sits
I know what you mean about it being a tight screw though (sorry, hahahaha. Phew, that's better. I'm such a child).
It took me a long time before I could get the end cap off as well. In fact it's still incredibly difficult taking it off and putting it on. But I think it's supposed to be like that!
If you have thick rubber gloves or a rubber suction cup (seriously, I use a suction cup) it's a lot easier.
Sent from my iPhone using Tapatalk
I know what you mean about it being a tight screw though (sorry, hahahaha. Phew, that's better. I'm such a child).
It took me a long time before I could get the end cap off as well. In fact it's still incredibly difficult taking it off and putting it on. But I think it's supposed to be like that!
If you have thick rubber gloves or a rubber suction cup (seriously, I use a suction cup) it's a lot easier.
Sent from my iPhone using Tapatalk
Risto, your esterigon has no defect buddy. If you see Scott's video, he mention that the side of the tube with a small channel is made for venting cap and the other side is made for the button case
For starters....... Am I unlucky, or what?
All of you are happy because you do have a perfectly made Esterigon.
And I envy you that.
Why? Because my Esterigon has a defect.
I mean the connection between Venting Cap and tuba.
In your Esterigon looks like this:
In my mod is as follows:
When I unpacked Esterigon, I did not seen this O-ring between the lower capem and tube.
Because someone the screwed it with great force.
Only after two days I was able to unscrew the venting cap.
Second, the internal (female) thread in tube 18500 is different than in the tubes 18350 and 18650.
Internal threads in tubes 18350 and 18650 are as shown in this video:
Such are the in my.
But the internal thread in tube 18500:
- at the one end the internal thread is made to the end of the tube.
- at the other end the internal thread is terminates around 1.5 millimeters from the end of the tube.
Why do I have only bad Luck?
Currently pushing esterigon to its (and my limits) with a 0,4ohm dual coil on a dripper. No issue whatsoever, no hot spot, just great.
The thread stops because that is where the o-ring on the end cap sits
I know what you mean about it being a tight screw though (sorry, hahahaha. Phew, that's better. I'm such a child).
It took me a long time before I could get the end cap off as well. In fact it's still incredibly difficult taking it off and putting it on. But I think it's supposed to be like that!
If you have thick rubber gloves or a rubber suction cup (seriously, I use a suction cup) it's a lot easier.
Sent from my iPhone using Tapatalk
Keep a roll of electrical tape with your vape gear. They will help you unscrew pretty much any tube. If you wrap a tape on the bottom cap, you will have no problem unscrewing it.
Ever since I got my Esterigon, it has been used quite extensively. Now, 22mm Just GG and GGTS feels BIG!
Also I am so used to the soft button of Esterigon, "classical" button of Just GG and GGTS feels pretty tough to press.
I am getting so spoiled! Anybody having similar experience?
It's the button!
Also I am so used to the soft button of Esterigon, "classical" button of Just GG and GGTS feels pretty tough to press.
I am getting so spoiled! Anybody having similar experience?
It's the button!
- Status
