fc 2000 1/8th wicks on ebay by tank ecigs, 20 bux for 3
FC 2000 Porous Ceramic Wicks 1 8" x1 5" 3 Included | eBay
FC 2000 Porous Ceramic Wicks 1 8" x1 5" 3 Included | eBay
- Status
Hey Elias, hows this look
The pos post is just a stud you can touch the wire to to pulse the temp of the wire. The neg screw supports the wick from breaking due to tension and provides neg continuity. By unscrewing the bolt you can lay down perfectly spaced hot wraps depending on the pitch or TPI of the threads of the bolt.
Dan
Heh now thats nice, using the bolt to pitch the coil, tension support of the neg post, constant voltage due to neg post and pos post distance regardless.... heck at this rate someone is going to come up with a jig that wraps itself
This is nice Dan, Im an Electrical Engineer and I would have never come up with this setup, I always over engineer the electrical side of things, looking at this it's so obvious and straight forward to set up and from an electrical point of view keeping the things that matter constant this will work.
this has got ticks in all the boxes, have you tried it yet, I cant see anything that could stop it from working
Well done...
Elias
Sorry about the bad video quality, new phone, but can someone tell me whats going on here?
it tastes like garbage, harsh as hell, and keeps blowing up in my mouth! lolololol
it tastes like garbage, harsh as hell, and keeps blowing up in my mouth! lolololol
the vamo is in rms mode, which goes up to 15 watts. its lighting on fire as low as 4 watts! nothing wrong with the vamo. also 2 imr 18350 batteries
edit -- just cheked, seems it was in N01 mode. thought it was in N02 mode. cant be why though
edit -- just cheked, seems it was in N01 mode. thought it was in N02 mode. cant be why though
Last edited:
sorry, the battery level is at 8 volts... not the output. the 2 18350 batteries were just put in after being charged.
hey perfect, these wicks won't give you vertical wicking like mesh bro...
try to feed the mesh something like a 1/4 tank by tilting the head down to 4oclock.... see how it behaves than slowly come back to 3oclock.... and vape at 3 at least for a day until u have that wick broken in...
edit: 8V? LOL
well i do tilt it when i take a hit, but the wick is on the other side, so every vape, im tilting away from the wick. but yea, the 8 volts is just the battery strenth, not the output, lol
ok, well sorry for hijacking the thread. i guess its my vamo. ive always had this thing heating up like that with ss and cotton wicks. my cotton wicks last about 1/2 an hour, then burn, ss wicks never worked right. never had it actually light on fire though. lol
yup, i just tested it on my silver bullet, no kick, with a fresh 18650 imr, and sure enough, its not cooking like that. guess all this time strugling with cotton and ss wicks, it was my vamo going into overdrive. got it from vaper break a few months back. time for a new vari-volt i guess.
EDIT: ok, the wick works great in my silver bullet... tastes really good! but alas... i just put up my SB for sale this morning , lol. got to get another VV mod. this thing was too big anyway. can anyone recommend a smaller one that isnt 260 bucks?
EDIT: ok, the wick works great in my silver bullet... tastes really good! but alas... i just put up my SB for sale this morning , lol. got to get another VV mod. this thing was too big anyway. can anyone recommend a smaller one that isnt 260 bucks?
Last edited:
hmm that won't work either if the wick is up there...
whether you wick is really dry or ur vamo vamos ala playa lol
i know, man! i havent enjoyed this damn vamo scince i got it!! nothing but problems!! i switched to a VV from the silver bullet cuz i wanted control.. guess the Vamo wasnt having none of that.And there you go
No wonder you looked like that in your last Avitar
Last edited:
just fell off my chair right now LOL man u just killed me.And there you go
No wonder you looked like that in your last Avitar
perfect man, yeah your new Avatar is comforting....
- Status
Similar threads
- Locked
