Finally I get it (IGO-L) wowwwwwww

[Waterman]

When set up correctly for what ever PV you use, you wont mind carrying juice because you'll wantto take it with you. Very satisfying I keep a sub ohm one set up for a mech mod and a 1.5 ohm cotton wick for my Z max. Some flavors seem to taste better at lower volt. Just a note, with the right coil you could use it on a twist.

 

[donnah]

My top cap on my IGO-L is snug, I have to really tug on it to get it off. Love Love Love mine. I drilled the air hole out to 1/16. I add 25-30 drops each time I refill and it lasts me a little while. I'm not a big fan of carrying around a bottle, reminds my of my early days when I dripped into an atty on an ego. But I don't mind because the flavor is so good. It prompted me to trade my zap for a GP spheriod.. I do like the spheriod, it's performing well but the flavor just isn't there.. maybe it's the flavor I'm using. I'm using a peanutbutter mix.. the IGO-L didn't seem to like the PB either.. I'll try a fruit flavor and see what happens.

 

[nickvegas]

My top cap on my IGO-L is snug, I have to really tug on it to get it off. Love Love Love mine. I drilled the air hole out to 1/16. I add 25-30 drops each time I refill and it lasts me a little while. I'm not a big fan of carrying around a bottle, reminds my of my early days when I dripped into an atty on an ego. But I don't mind because the flavor is so good. It prompted me to trade my zap for a GP spheriod.. I do like the spheriod, it's performing well but the flavor just isn't there.. maybe it's the flavor I'm using. I'm using a peanutbutter mix.. the IGO-L didn't seem to like the PB either.. I'll try a fruit flavor and see what happens.

mine is very snug too I have not tried that many drops usually I do 10-13 at the time and I get great performance.

 

[nahoku]

mine is very snug too I have not tried that many drops usually I do 10-13 at the time and I get great performance.

All the newer IGO-L's have better o-rings... thus they're snug. I removed one of the o-rings (bottom one) to make it easier to remove the lid. It's still way snug enough not to pull off accidentally. Perfect!

 

[The Yeti]

Got one of the Igo-Ls a few days ago - AMAZING! Puts my ZAP, Ody, Penelope, RSST, Vivi, Protank etc. to SHAME! Clouds of vapor and taste like I've never experienced before.

Wound up a new 1.0ohm coil last night (previous was at 1.2) using my Sigelei #19 and I'm vaping happily away!

 

[discusfan]

What ohm coil would you use on a twist?

 

[MiamiMom63]

I have 2 of the Igo-L's. I had to widen the holes with a 1/16 drill bit and now they work great. I use cotton wicks and 32g kanthal. I put about 20 drops in and it lasts quite awhile. At night I can just rinse it in the sink and set it out to dry and rotate the two I have for flavors. One of my caps is so tight that I have to have it on my mod before I can pull the cap off. The other one is snug but not super tight, which I sort of like better because it's easier for me to look at my beautiful coil and if it is starting to get dry. It's definitely not too loose though.

 

[The Yeti]

What ohm coil would you use on a twist?

1.5 - 2.0ohm.

 

[nickvegas]

I have 2 of the Igo-L's. I had to widen the holes with a 1/16 drill bit and now they work great. I use cotton wicks and 32g kanthal. I put about 20 drops in and it lasts quite awhile. At night I can just rinse it in the sink and set it out to dry and rotate the two I have for flavors. One of my caps is so tight that I have to have it on my mod before I can pull the cap off. The other one is snug but not super tight, which I sort of like better because it's easier for me to look at my beautiful coil and if it is starting to get dry. It's definitely not too loose though.

I have a new method for cleaning when switching flavors I saw it on youtube, I purchased a small torch at lowes first you hit it with the flame and let the juice burn off when done just torch all the silica and the coils as well for a minute or so and they will become like new if I can find the video I will post it so you can see what I mean.The silica no matter how dirty will change color and go back to original pearl withe I was amazed by this method would recommend it to anyone.

 

[nickvegas]

here is the video enjoy it.

Proper way to torch the Silica Wick to restore it ... - YouTube

 

[MiamiMom63]

Thanks, yea I have heard of that but I am using cotton wicks so that isn't an option for me.

 

[nahoku]

One of my caps is so tight that I have to have it on my mod before I can pull the cap off.

Take the bottom o-ring off. You still may have to have it on your PV to remove the cap, but it'll be much easier.

 

[MiamiMom63]

Thanks for the advice. I will check that out.

 

[nahoku]

Thanks for the advice. I will check that out.

No problem! Both of my IGO-L's have only one gasket now. Works great!

 

[qorax]

I have a new method for cleaning when switching flavors I saw it on youtube, I purchased a small torch at lowes first you hit it with the flame and let the juice burn off when done just torch all the silica and the coils as well for a minute or so and they will become like new if I can find the video I will post it so you can see what I mean.The silica no matter how dirty will change color and go back to original pearl withe I was amazed by this method would recommend it to anyone.

here is the video enjoy it.

Proper way to torch the Silica Wick to restore it ... - YouTube

But, won't it give a burnt taste?

 

[nickvegas]

But, won't it give a burnt taste?

None whats so ever,just let it sit for 30 seconds pour some juice on coils and wick and your done.

 

[qorax]

None whats so ever,just let it sit for 30 seconds pour some juice on coils and wick and your done.

Great! Thanx.

 

[Red_Bird]

I was not real impressed with the IGO-L I just got in the mail. Its ok but nothing to get excited about. My rebuilt Kanger Pro Tank hits just as well, and its less messy.

I used 3mm Ekowool silica and put a 4/3 wrap of 30 gauge kanthal on it. Reads 1.4 to 1.5 ohms on Lavatube 2.0 and my Vamo 2.

The size of the airhole limits the draw somewhat.

 

[The Yeti]

You gotta be doing something wrong RB, my Igo-L beats out all my other attys for flavor production, hands down...and most certainly beats out a Protank, rebuilt or not.

Ream out the air hole a bit and make real sure it's lined up next to your coil.

 

[nickvegas]

You gotta be doing something wrong RB, my Igo-L beats out all my other attys for flavor production, hands down...and most certainly beats out a Protank, rebuilt or not.

Ream out the air hole a bit and make real sure it's lined up next to your coil.

I agree none of my tanks hit like a IGO-L TH taste easy to build what else could you ask for.