Focalecig ... A new Fasttech??

Status
Not open for further replies.

Cranky99

Super Member
ECF Veteran
Verified Member
Jan 6, 2014
974
4,116
Iowa, USA
I hope the nickname "Crystal Big Nasty" spreads like wildfire :laugh: ... do you have any Protank coils laying around? I know you said you had no luck with PT's, but if you have some left they are good to practice on ... if you can rebuild a PT coil head, you can rebuild anything.

And welcome to the club my dear, you are officially a "vaper" ... we all started with the intent of just quitting smoking, and we all became addicted to what is now a genuine hobby for most of us. ;-) None of us "need" as much gear as we have, but like you said, its fun, and now its a hobby/obsession :D ... In no time at all you will have your credit card # memorized for spontaneous, gratuitous late night purchases just like Burnie. :laugh:

I did just find some a couple days ago. That's a good use for them, thank you.

Unfortunately my cc number is programmed into my ipad and it offers to auto fill everything when I really just wanted to window shop and throw stuff in my cart.

The pretty stuff calls my name late at night. :oops:
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
I did just find some a couple days ago. That's a good use for them, thank you.

Unfortunately my cc number is programmed into my ipad and it offers to auto fill everything when I really just wanted to window shop and throw stuff in my cart.

The pretty stuff calls my name late at night. :oops:

That shineyitis syndrome will get you ever time ... Every time you try to get out, it pulls you right back in :unsure: .... :lol:
 

NiNi

Ultra Member
ECF Veteran
Verified Member
Feb 4, 2013
1,270
3,302
Paulden, Arizona
Easy coil for Kayfun Lite. I use my MVP to "torch" ie burn my coil instead of using a torch.


I position my coils exactly like he does, and use toenail clippers to cut the "ends" of the wire off the screws. I also wet the wicks with juice before assembling and do a few pre "fires" to make sure everything's up to speed.
 

NiNi

Ultra Member
ECF Veteran
Verified Member
Feb 4, 2013
1,270
3,302
Paulden, Arizona
And this is your Focalecig order NiNi???? Holy shiznits that is smoking fast!! ... wait until Monday, delayed gratification is a wonderful technique to heighten the overall pleasure of this vape mail experience. :lol:

Yep, it's the Focalcig order with the 3 Marstech KFL's!!!! They just got back to work on the 6th and it's sitting in the PO on the 8th, BUWAHHH! That IS smokin' fast!
 

NiNi

Ultra Member
ECF Veteran
Verified Member
Feb 4, 2013
1,270
3,302
Paulden, Arizona
Crankybiitch, here's the thread for the "official" Kayfun Lite. I read through the whole thing AFTER I got my Tobeco "clone" KFL. The original had quite a few issues and I didn't experience any of them with my Tobeco. The Russian is very, very similar.
They show a lot of different coil builds and different wicks on that thread. The Marstech KFL's I ordered from Focalecig shouldn't cause me any problems, trouble shooting should be easy if I come across anything after reading so much.:ohmy:
http://www.e-cigarette-forum.com/forum/rebuildable-atomizer-systems/436118-kayfun-lite.html
 

Burnie

The Bug Man
ECF Veteran
Verified Member
Jul 1, 2009
5,572
18,204
Sunny Florida
Well a little Review of the EGO batteries I got from FC. Unfortunately, not a good review. They arrived yesterday, and as I do with all batteries I put them on the charger. Didn't take long and said they were charged. I also test all batteries to see how long they last (even if I am giving them away as I don't want to give someone something that is bad) so I started with the silver one this morning first thing, only lasted 4 hours, not good for a 900mAh battery. Switched to the black one thinking I guess I just got a bad battery with the silver one, well it lasted almost 5 hours, still not good. The 900mAh batteries I got from FT, I ordered the same day as these, after 9 hours are still not blinking/dead, still have 2 of 5 bars on LCD. The ones they sent me by mistake last just like the FT ones, so it is not all there EGO's, but this one SKU, I would not recommend ordering this SKU from FC. Doris was good making the first order with the wrong EGO's right, so I am not going to hit her with another problem, I'll just put them in my backup box for emergency's, or some such.

Below are the links to both batteries.

$15.60 EGO 900mAh 0.6" LCD Voltage Adjustable Rechargeable Battery for Electronic Cigarette-Black/Silver(2-PCS)

Ordered 1 Blue & 1 Black - $8.38 EGO-VV 900mAh Rechargeable Variable Voltage Battery w/ 0.55" LCD - blue

Vape On
Burnie
:vapor:
 

Cranky99

Super Member
ECF Veteran
Verified Member
Jan 6, 2014
974
4,116
Iowa, USA
Crankybiitch, here's the thread for the "official" Kayfun Lite. I read through the whole thing AFTER I got my Tobeco "clone" KFL. The original had quite a few issues and I didn't experience any of them with my Tobeco. The Russian is very, very similar.
They show a lot of different coil builds and different wicks on that thread. The Marstech KFL's I ordered from Focalecig shouldn't cause me any problems, trouble shooting should be easy if I come across anything after reading so much.:ohmy:
http://www.e-cigarette-forum.com/forum/rebuildable-atomizer-systems/436118-kayfun-lite.html
Thanks. I have to work in a bit but will check this out if I get home at a reasonable hour. I have to work my real job tomorrow though so I may just sleep. :(
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Well a little Review of the EGO batteries I got from FC. Unfortunately, not a good review. They arrived yesterday, and as I do with all batteries I put them on the charger. Didn't take long and said they were charged. I also test all batteries to see how long they last (even if I am giving them away as I don't want to give someone something that is bad) so I started with the silver one this morning first thing, only lasted 4 hours, not good for a 900mAh battery. Switched to the black one thinking I guess I just got a bad battery with the silver one, well it lasted almost 5 hours, still not good. The 900mAh batteries I got from FT, I ordered the same day as these, after 9 hours are still not blinking/dead, still have 2 of 5 bars on LCD. The ones they sent me by mistake last just like the FT ones, so it is not all there EGO's, but this one SKU, I would not recommend ordering this SKU from FC. Doris was good making the first order with the wrong EGO's right, so I am not going to hit her with another problem, I'll just put them in my backup box for emergency's, or some such.

Below are the links to both batteries.

$15.60 EGO 900mAh 0.6" LCD Voltage Adjustable Rechargeable Battery for Electronic Cigarette-Black/Silver(2-PCS)

Ordered 1 Blue & 1 Black - $8.38 EGO-VV 900mAh Rechargeable Variable Voltage Battery w/ 0.55" LCD - blue

Vape On
Burnie
:vapor:

Good to know Burnie, so thank you for posting the update ... well, at least they will have some use as back ups :unsure:. Interesting that the one's you received by accident last longer the one's you intended to get.
 

Crocky

Ultra Member
ECF Veteran
Verified Member
Mar 14, 2013
1,752
2,280
North Carolina
I did just find some a couple days ago. That's a good use for them, thank you.

Unfortunately my cc number is programmed into my ipad and it offers to auto fill everything when I really just wanted to window shop and throw stuff in my cart.

The pretty stuff calls my name late at night. :oops:

I should ask how you program your ipad to do that but I might not want to know.....LOL
 

Nouseforanick

Senior Member
ECF Veteran
Jan 17, 2014
157
110
Beside you
How do I contact Doris or any other person at focalecig? No "contact us" tab, only a "live chat(with Doris) tab, which doesn't work. Any help?

You can either drop them an email as per @Nikkita6 or add her in skype. I added her in Skype thou and she replied me in both. Very friendly girl and great customer service.We even chat about the weather.lol
 

DelboyinDorset

Super Member
ECF Veteran
Verified Member
Nov 10, 2013
391
343
Dorset - UK
Nikki and NiNi, thank you both, I now have a twin coil working on the Steam Turbine SS mesh @1ohm exactly and a single SS mesh on the Kraken @1.2ohm and well pleased with your help I was able to overcome this :)

Got an issue now with my Nemesis in that its not liking either the gennies, it will fire the Kraken a treat but the turbine... not a chance :(

Oh well, off to look at more vapey stuff :)
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
Nikki and NiNi, thank you both, I now have a twin coil working on the Steam Turbine SS mesh @1ohm exactly and a single SS mesh on the Kraken @1.2ohm and well pleased with your help I was able to overcome this :)

Got an issue now with my Nemesis in that its not liking either the gennies, it will fire the Kraken a treat but the turbine... not a chance :(

Oh well, off to look at more vapey stuff :)

Ahahaha ... yeah, sure go buy more shiney stuff to make me jealous :p ... Glad you were able to work out your builds though, it's very gratifying when builds perform they way you want them too.
 

Nikkita6

Vaping Master
ECF Veteran
Verified Member
Oct 7, 2011
8,970
18,956
New York
You can either drop them an email as per @Nikkita6 or add her in skype. I added her in Skype thou and she replied me in both. Very friendly girl and great customer service.We even chat about the weather.lol

Damn, even I haven't chatted w/Doris on skype :blink: ... I better step up my game :laugh:.
 

DelboyinDorset

Super Member
ECF Veteran
Verified Member
Nov 10, 2013
391
343
Dorset - UK
Think I found the cause with the Turbine, a tiny edge of one of the positive lines was touching a coil, wangled it out and its now sitting on my Sentinel M16 really catching me breath, what seems to help too is that nZonic head I got on the M16 to replace the useless alloy threaded head, according to my voltmeter I have 99.5 voltage throughput to the connector :)

Focale don't seem to be putting anything new up :*( Have to put Doris into the naughty corner for this :p
 
Status
Not open for further replies.

Users who are viewing this thread