Focalecig ... A new Fasttech??
- Thread starter Nikkita6
- Start date
- th_trl_thread_readers 0
-
- Tags
- china vendors fasttech
- Status
Oh, and at 1.2ohm and 14 watts, this is a very warm vape (Rose). I had heard someone refer to the vape as coolThe vape I am getting is far far from cool .. although I kind of wish it were cooler because I am not really a fan of very warm vapes, but the flavor is stellar so I will deal.
How airer of a draw does it have Nikki?
All these new tanks are only being made in silver, thinking I might need a silver mod, but really needs to be a painted silver though.
Its plenty airy for me hun .. the air hole looks to be about 2.5-3mm, and I have it all the way open. Its is definitely bigger than the air hole the Russian 91% base that you and I both have. Just come into the light darling, I promise it won't hurt
Its plenty airy for me hun .. the air hole looks to be about 2.5-3mm, and I have it all the way open. Its is definitely bigger than the air hole the Russian 91% base that you and I both have. Just come into the light darling, I promise it won't hurt
Well been looking at these higher watt devices for a while now, so maybe sometime soon I will pick one of them up in silver, did you know there is now a 50watt ZNA coming?
That is good size hole
Well been looking at these higher watt devices for a while now, so maybe sometime soon I will pick one of them up in silver, did you know there is now a 50watt ZNA coming?
That is good size hole
Yes I did know that there was a Cloupor 50W coming, and they are sourcing the body of the device from A-mod Wotofo ... I am far more interested in the Robbot ZNA 30 though, which will have the Cloupor DNA 30 chip.
This Cloupor 50W ZNA is a knee jerk reaction to the less than "open arm" welcome of the T5, which was heavily criticized for its appearance and size for 18650. That is why the sourced the body of the device from Wotofo, and just slapped their chip in it. This might also explain why Wotofo was so slow with fulfilling outstanding vendors orders ... they had sold all of their available ZNA bodies to Cloupor
I like the looks of the ZNA, but I want at least 50 watts, and with the higher power I will probably use, I really want a dual 18650 device, so ZNA will probably be a no go for me, oh and I want one for $30, can you sort that out for me Nikki
I like the looks of the ZNA, but I want at least 50 watts, and with the higher power I will probably use, I really want a dual 18650 device, so ZNA will probably be a no go for me, oh and I want one for $30, can you sort that out for me Nikki
theres a 50 watt out now *Cloupor*. I saw it today but, I can't remember the site... looked just as clean as the A-Mod.
Speaking of MVP V2.0 and the 30W clone box...
How do they compare size wise? The MVP V2.0 is about as big of a box as I'm comfortable with.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
How do they compare size wise? The MVP V2.0 is about as big of a box as I'm comfortable with.
Sent from my Nexus 7 using Xparent Purple Tapatalk 2
I got to handle one of the ZNA30 clones like Nikki shows in her pictures with the Rose. It is small and I could wrap my big hand around it. I think it is 22mm x 34mm in thickness and width. I can not speak about the board/chip in this mod as I did not try it with a battery, but the fit and finish is very good. A friend of mine who has an authentic ZNA said this clone is very close in looks to the real one.
That is because it is the Amod with the Cloupor chip in it ;-) see prior page
Last edited:
This Cloupor 50W ZNA is a knee jerk reaction to the less than "open arm" welcome of the T5, which was heavily criticized for its appearance and size for 18650. That is why the sourced the body of the device from Wotofo, and just slapped their chip in it. This might also explain why Wotofo was so slow with fulfilling outstanding vendors orders ... they had sold all of their available ZNA bodies to Cloupor
But Cloupor came back with the T8 that I am super interested in. Quite compact for a dual 26650 mod.
http://www.vapescores.com/wp-content/uploads/2014/08/cloupor-t8-150-watt-660x330.jpg
I have no clue, never owned or even seen a MVP in real life... maybe somebody else will chime in if the haven't already, just realized that there is another unread page
Well hang on darling cuz the Robbot ZNA is a coming, and its a true 1:1 of the Zen ZNA, including the Z2 threading .. the Wotofo is a Zen Lite clone, and its not 1:1, just really close. You should go for one or the other hun, especially since they are sitting there right in your neighborhood
Yes I know, the site I write for is hosting a giveaway for it ...
Well hang on darling cuz the Robbot ZNA is a coming, and its a true 1:1 of the Zen ZNA, including the Z2 threading .. the Wotofo is a Zen Lite clone, and its not 1:1, just really close. You should go for one or the other hun, especially since they are sitting there right in your neighborhood
Who is the manufacturer of the Robbot ZNA and what chip is it using? Also which battery tube comes with it or will be available for it? I don't need another regulated mod, but these things have really got my attention and I may have to get one or the other of them. You know, just to add to the collection. We have to have more mods, even though we can only vape one at a time.
Anyone have the eleaf lemo? quite interested in it, as it comes in black and it is a 23mm device, have 4-5 23mm devices, but only have the taifun as a 23 topper, so I am really tempted by the lemo.
Robbot Tech is the manufacturer of the 1:1 Zen ZNA, and they are using the Cloupor DNA 30 chip .. they were initially using the Yihi chip at least for their samples, but Amod has an exclusive with Yihi for the sxa300 chip, so no one else can use it. The Robbot Tech will come with the 18500 tube just like the original, but the 650 tube will have to be purchased separately .. The Robbot is also way more expensive then the Amod being that it is machined from 316L SS, not aluminum. Production time is also 3x longer than the Wotofo.
Interesting developments .. someone is posting pics of a ZNA 50 supplied by Vceego in the APV section, but it ain't the Cloupor though. The pics look like the typical photoshop job, but the pics are using the original SS ZNA body, not the aluminum ZNA lite body?? So are there two companies launching a ZNA 50, or is Vceego as ignorant as most other Chinese manufacturers and just failed to pick the correct ZNA to photoshop?
This is a pic of the Cloupor ZNA 50 from Cloupor's website, and this is the Amod ZNA Lite body ...
This is a pic of the Cloupor ZNA 50 from Cloupor's website, and this is the Amod ZNA Lite body ...
I have Both a Hana Clone and a Mini Hana Clone sitting on my Desk right Now. Both are from FT. And Both are being RMA-ed.
The 18650 Hana is 3.515" -x- 1.880" -x- 1.025"
The Mini Hana is 2.835" -x- 1.690" -x- 1.025"
and my MVP v2.0 is 3.760" -x- 1.610" -x- .860"
- Status
Similar threads
- Locked
