Genesis Line - mini genesis

[BJ43]

As a workaround, you could start off with an empty Line. If you wait to fill it till pressure altitude has stabilized, it shouldn't leak back out of the Line. I could be wrong though..... it wouldn't be the first time

LOL that would work but could get messy in turbulence, besides I like to vape on the way up.

 

[harmonic]

leave the top unscrewed so there is no pressure buildup as you gain altitude. at the top screw the cap back on. and only leave it half full the juice might expand a little under the different pressure too idk. just a thought lol

 

[CraigHB]

Hmm, don't like the idea of a wire wrapped terminal. Would it be easy to modify for screws? The Bulli A2-T uses screw terminals I believe. How would you compare the Line to a Bulli A2-T with an SS wick?

 

[urquidezj]

It's not as bad as you think, it just takes a while to get used to it and become a master. I made my own Genisis atty a while back. It took me about a week to get good at it, to learn what worked, what didn't, it just takes time. It took me 8 hours the first time attempting to even fire it Haha

 

[northhar]

Hmm, don't like the idea of a wire wrapped terminal. Would it be easy to modify for screws? The Bulli A2-T uses screw terminals I believe. How would you compare the Line to a Bulli A2-T with an SS wick?

Wire wrap terminals are great if the terminal was square. The tech for this is old and proven even the space program used wire wraped terminals till the end. I guess we do not have any telephone repair people as vapers or they just do it without knowing why just that it works..

With a square terminal the wire when wrapped bites into each corner so a 4 wrap would give 16 connections.

This from a Wiki on wire wrap.

A correctly designed wire-wrap tool applies up to twenty tons of force per square inch on each joint.

Wire wrap is almost a forgotten tech having been replaced by newer tech for quite awhile, except in some telephone systems which still use it today...

Just to sum it up for wire wrap to work properly the terminal post must be square...

There a little history for everyone...

 

[clavit]

Cool info, Northhar.
However, I'm not going to be the first one to take a file to the terminals of my Line to square them off!
Anyone else??

 

[QueenofHearts]

You need to Oxidized to whole mesh not just the top.

The Queen Has Never Oxidized The Whole Mesh On Any Of HRH'S Genesis Attys...
The Queen Wouldn't Want Oxidized Mesh In The juice Tank!

 

[kcos]

The Queen Has Never Oxidized The Whole Mesh On Any Of HRH'S Genesis Attys...
The Queen Wouldn't Want Oxidized Mesh In The Juice Tank!

Well than you will get some shorts

 

[QueenofHearts]

photos

Stefano Lovely, Brilliant Set-up In Every Way!!!

 

[QueenofHearts]

Well than you will get some shorts

Surely The Queen Thinks That You Must Be Referring To Clothing Perhaps?

As Long As The Mesh Does Not Make Any Contact With The Metal In The Bottom Of The Juice Tank,

The Queen Most Certainly Will Not!!!
Look At Stefano's! Wait, Ya Also Tried Telling Him The Same Thing As HRH Recalls Now Too...

The Queen Was Only Trying To Be Helpful As Queen Has Every Type of Genesis Atty Ever Made, And This Is Only Your First One...

 

[ukeman]

I got ahold of an extra from DRat.... thanks D.
I have only worked with an iatty before, a few coils, and I find the Line just too simple. (watch i probably just jinxed it) ... first try, after watching Mario's vid it worked just as he laid it out.
I used 32 Kanthal and some 365 mesh from DRat.
Wrapped about 2 - 3 x's and just folded it around the posts and she metered a steady 1.9 Ohms.

I am pleasantly surprised by the slightly tight draw on this #054 Line. Was afraid it might be too airy, but not the case.

The taste is great but I feel it needs to wick much more juice on to the wick. It reminds me of what the ego tank is trying to achieve and never quite could in my experience; get enough juice and vapor.
The vapor is not bad, I just know with better wicking this thing will come into its own.

So i guess I'll try the hole in the wick between the 1 and 2 wraps or the 2 and 3....

Right now I'm vaping at 3.9v and dripping it too; for awesome vaping.

 

[shpaolin]

The first setup I made, 5 minutes after I have received, took me 5 minutes and it still working great. The second line I have not been able to get it correct. Same setup, mesh all good, no shorts but no consistent way of getting the ohm right. I have no patience anymore for today. One line is working with .20 Kanthal. At least something...I don't give up but will wait for others to report back that they have the greatest flavor ever and the setup is stable as a rock on a Provari.

They are all build the same way. It is all up to you. It will work the way you make it work.
On provari use 0.15mm kanthal and you will get stable ohm. Stefano just made some tweaks
and it works better that way, more juice on the mesh. I never use any type of genesis on VV device
untill 3 days ago. I was mad at my equipment becouse i cant make it work and getting low ohm
, but when i use 0.15 kanthal it just start working like it should. I made 10 setups just to make sure
and they all work the same way 3-4 wraps 2.5-2.7ohm.

 

[QueenofHearts]

The Queen Is So Happy Because The Shipping PM Arrived!!!
Thank Yas, Del, Van And All For Being So Very Helpful In Every Way, Patient And Most Gracious!
The Queen Could Never Have Had Such Patience With Everything...
Maybe Queen And Cos Will Get To Have Our Shouting And Dancing Again Too...
That Would Be Brilliant!!!
Especially Because Cos Is Not Only Very Nice And Patient, But Always Happy For Others!!!
The Queen Also Doesn't Want To Go To Jail For Disturbing The Peace Whilst Over Here...
With The Two Of Us, It's Always Been Harder To Pinpoint Where We Both Are At!!!

 

[kcos]

QueenofHearts, I was just pointing out what worked for me. No shorts good favor and vapor. Only took two times of set up.

 

[ukeman]

Been playing with the LINE for a couple hours now, and just a new discovery... The LINE has a tank at the bottom and it wicks up the mesh roll.
I was dripping it because i wanted more vapor that what it would wick up...
So i tried tilting it so the juice would roll up to the coil area and viola....
I am really loving it so far. !!!
I have it on a Provari set at 3.9v and the resistance of coil is 1.9 Ohm.
This is the best vape I've had so far, and to think it is a solid unit that will last and last.
If I can get this kind of vape on the first try, I feel pretty good about the LINE.
Thanks shpaolin and crew.

 

[emonty]

Great ukeman! happy to hear it is working 4 you. One of my lines is working also good, when I have the time/patience I will work on the second one...

 

[Alžběta Madragana]

OK I rolled with paperclip used Dan's oxidizing method no shorts BUT... flooding and juice in mouth low vapor and muted flavor???
Gone through a tank of juice in a half hour because sucking it up into my mouth .

GARF! Been there, done that... Hope you get it fixed, girl!

 

[kcos]

GARF! Been there, done that... Hope you get it fixed, girl!

Yup it's all good now

 

[Alžběta Madragana]

LOL that would work but could get messy in turbulence, besides I like to vape on the way up.

LOL this is all STEALTH vaping, I assume? What with all the crazy new regulations they keep adding on to folks in airplanes??

 

[Alžběta Madragana]

so after reading thru the rest of this Thread, at least now I know I'm oxidizing and wrapping my Kanthal right. The pics and other stuff posted here has ALL been most helpful. "Thank You!" to everyone here who has posted. I'm new to the Genisis Line but I really like it. I have yet to wrap consistent coils, but with practise I know it'll get better.
"Happy Vaping"
PS - And so with this Posting, I hereby declare my independence from:
- Chinese made batteries
- Chinese made e-juice
- Chinese made atties
Basically, that's my tiny part in helping the US Trade Deficit LOLOL.
Just my 2 cents....... *takes another toke here* LOL