Genisis / Kronos Update

[urquidezj]

K, guys, I promised a video & here it is. Please forgive the "unglamorous-ness" as I am post-op from a hip replacement & was in bed at the time I did this demo. I have it on the Precise Plus 18350. It would also look sweet on the P16. Any mod taller than that, it might look too big. For once I am not using AVE Hype...........OMG (don't tell Ben, it was in the other room at the time)

Daam do u take some long hits!! U might wanna lower ur resistance because the vapor its letting off is weak, what are you wrapped at? I had mine at 2.1 ohms at 4v on provari and my clouds where really thick i imagine 1.8 ohms will give u the same effect on the P series.

 

[bmwjen]

It cross threaded your DON? holy crap..........do you have the tap to re-thread it? My husband had to do that once on one of my mods. The black plastic thing isn't epoxyed in place. mine came out as I went to fill the bottle the other day.......... I would try to get a grip on the glass bottle with either some needle nose beed pliers, or thin tweezers that are placed in a vice. This is all just my opinion of course & my husband is not home from work to properly back me up on my opinion.

Yesterday, I dropped my LV and Don from the countertop down to a very hard tile floor. Two things happened:

1. It instantly cross-threaded the 510 connection in the Don. I thought it had broken off the 510 seal in the atty, but no, it cross-threaded. That surprised me a bit. I managed to get it back out, with some pliers and WD40. I now have some scratches on the outside of the LV base, but no big deal, really. Went back in just fine once I got it out.

2. The glass bottle broke off, with the glass threading still inside the plastic cap (which of course is glued into the middle piece). I'm having a hell of a time getting the glass out of there. Anyone have any suggestions on that? I may end up having to completely remove the plastic cap and put in a new one, but I'd rather avoid that if I can. I'm really not even sure how to remove the plastic cap, as it is epoxied in place (I put it in with Gorilla epoxy). Any ideas on how to get the cap out?

 

[bmwjen]

Daam do u take some long hits!! U might wanna lower ur resistance because the vapor its letting off is weak, what are you wrapped at? I had mine at 2.1 ohms at 4v on provari and my clouds where really thick i imagine 1.8 ohms will give u the same effect on the P series.

I don't know what i'm wrapped at, good question. I'm gonna have to look at it & get back to you. i've got the mod in my bedroom right now.

 

[VapRon]

When I use the 0.20 there is less vapor but more th. With the 0.16 it is the other way around more vapor less th.
The 0.16 is my favorite. If anyone likes to trade a 50 m roll 0.16 for a unused ( I have 2) 0.20 pm me.

 

[VapRon]

Have got a traiding partner for the .20 roll.

 

[urquidezj]

try 3 wraps, 2 on one side and 3 on one side, it will make ur throat numb and vapor will remain around lol.

 

[urquidezj]

but keep spare batteries charged it eats em lol

 

[Shead]

No updates from Tai Pan?

 

[urquidezj]

14 days out on glv. Kronos not sure.

 

[ArtificialReef]

I had mentioned that the 510 connection on my glv was a little squirrely. It didn't want to thread sown and snug up. If it did thread, I would have to crossthread it a bit to get it to tighten at all. All of my mods, except for one box mod that doesn't get much use, broke. So, I found out that the shorty 510 with the nit on the back of it fits the threads on the glv perfectly. So I built this "copper" based mod specially for the glv. Awesome!
View attachment 79263

 

[sanjosse]

@Artificialreef, I likes Alot! I'm still waiting for mine... Some day I'll get to play with it too...

 

[Eagle1]

I had mentioned that the 510 connection on my glv was a little squirrely. It didn't want to thread sown and snug up. If it did thread, I would have to crossthread it a bit to get it to tighten at all. All of my mods, except for one box mod that doesn't get much use, broke. So, I found out that the shorty 510 with the nit on the back of it fits the threads on the glv perfectly. So I built this "copper" based mod specially for the glv. Awesome!
View attachment 79263

Gotta ask: What, specifically, is the "shorty 510 with the nit on the back" and where did you get it?

I'd also like to know what you used for your "copper mod" - and what its internals are (volts, etc.).

 

[otrem]

nit=nut. maybe. a 510 to 510 adapter with nut.

 

[ArtificialReef]

nit=nut. maybe. a 510 to 510 adapter with nut.

I am out and about but this evening I wil answer those questions.

Sent from my DROIDX using Tapatalk

 

[alvinosj]

I ordered 2 Genesis LV, till now i haven't received any shipping notification.

I've sent email to Uwe, but he doesn't reply..

Can somebody please advise me what to do?

 

[harpo]

I ordered 2 Genesis LV, till now i haven't received any shipping notification.

I've sent email to Uwe, but he doesn't reply..

Can somebody please advise me what to do?

He said they had issues with some tops or something and they should all be shipped in 30 days. This was about 18 days ago. By the way he's terrible at keeping people informed at what's going on so don't feel alone. Plus when he does answer he acts as though he's doing you a favor by answering your email. Seeing this is a co-op there's not much you can do other than maybe dispute the charges with paypal or try and get someone to buy what you ordered.

 

[alvinosj]

originally i order 4 genesis, and i sold away 2 invoices, so i am left with 2 invoices right now..

 

[VapRon]

I just checked the e-raucher forum. The last info I found was on 02/11 and it was said that the new top parts should come in one week and then he is expecting the assembled ones.
There are also a few folks there waiting patiently. But I am absolute sure as they are that you will get them.

I am just a co op participant as everyone else. Just wanted to give some info I found there.

Hope that helped somewhat.

 

[kromo]

one to me

 

[knut]

This is from Spanis forum. A boy in Argentina has recived the GLV three days ago

Cigarrillo Electronico - Foro - Vapeando.com • Ver Tema - Génisis LV