I guess there's still hope I might see it one day still no updates on the kronos 
Genisis / Kronos Update
- Thread starter johnpencraig
- Start date
- th_trl_thread_readers 0
- Status
The bottles are just glass and behave like glass.
Greetings Tai Pan,
The Queen Has Duly and Appreciatively Received HRH'S Order Of 2, GLVs and all of the many, extra/spare parts that were ordered, except for the 30, extra bottles!!!
"A Royal PM From "The QueenofHearts" Has Been Sent To Ya With Order Info & Royal Family Insignia"...
Per Chance, Is A "Royal E-Mail Also In Order"?
The Queen Has Been, and Still Is Most Heavily Inundated With "Royal Duties" Both Here,
and Abroad...
The Queen Is In Great Need of Her Extra Bottles For The GLVs Due To "Royal Duties"...
erm, and a Notoriously, Shameless Love of vaping...
As I've More Than Plenty of All Kinds Of "The Various, Other Types of Bottles"!!!
Seems That 2011 Is A Very Fine and Highly Sought After Vintage Year For The GLV Bottles!!!
So The GLV Bottles Are In Most High Demand, and Most Unfortunately...
There Are Not Near Enough At Hand Where Ever I Am!
"The Royal Wine and Vapour Cellar" Is In Great Need!!!
Your Assistance In This Matter Would Be Most "Royally Appreciated"!!!
Many Congratulations On A Finely Crafted, and Lovely Genisis!!!
With Much Gratitude,
The QueenofHearts
Last edited:
Queen, I know you want your order completed, but these are said to fit too: Empty 3ml Bottle with non Childproof cap
Just got mine in the mail! I barely looked T it so far, but it seems very nice. Thanks greatly Uwe
I am greatly enjoying my GLV!!!
Me to Debb. I learned this week that I dont have to change the kantal every 3 days. Thats what I did until now.
One of my flavors has TE and the gunk bildup was real bad after 3 days. Now I take a toothbrush and scrape it off and rinse it.
Voiala ready to go.
Got my GLV attys today one built one as a a kit. I will try to make some time this weekend and see if I can get the built on fired up. The kit will have to wait a while due to my work load.
Just received my LVs and it is a wondrous thing! Uwe and crew you are owed many thanks for letting us participate in your co-op.
Ive been in the hospital and the LV has been on hold at the PO. I got delivery this morning, wired it up, toasted a couple of coils getting the right ohms, then vape heaven. Great job on design, manufacture, and assembly. Threads are smooth and assembly and cleaning easy.
Now as far as the 3ml Madvapes bottle compatibility:see pic.
The standard 3ml I have is 44mm tall, the one at MV is 39mm tall. Yes the threads will fit (I didnt check the seal quality), but the LV is designed for a bottle height of 33mm. To use the 3ml bottles youll need to make a new outer tube (Ghost Protocol style) to extend the chamber length.
View attachment 82439
(Course, if someone wants to try cutting the bottom off the 3ml bottle to get it to fit Id certainly like to hear how that works for ya.)
Ive been in the hospital and the LV has been on hold at the PO. I got delivery this morning, wired it up, toasted a couple of coils getting the right ohms, then vape heaven. Great job on design, manufacture, and assembly. Threads are smooth and assembly and cleaning easy.
Now as far as the 3ml Madvapes bottle compatibility:see pic.
The standard 3ml I have is 44mm tall, the one at MV is 39mm tall. Yes the threads will fit (I didnt check the seal quality), but the LV is designed for a bottle height of 33mm. To use the 3ml bottles youll need to make a new outer tube (Ghost Protocol style) to extend the chamber length.
View attachment 82439
(Course, if someone wants to try cutting the bottom off the 3ml bottle to get it to fit Id certainly like to hear how that works for ya.)
I nominate Para to do it, should get near seamless results. 
First there was the Ice Drops bottle, then the 3ml came up. I recall something about the shoulder of the 3ml bottle getting close to the air holes, but not a length problem. 5mm does make a difference, but I'm not so sure if that is enough. Given the choice between the two I'd rather have a go at modding the plastic bottle though.
Maybe, a) cut lower 1/3 of bottle with a razor, b) insert new top into bottom, c) seal with heat?
First there was the Ice Drops bottle, then the 3ml came up. I recall something about the shoulder of the 3ml bottle getting close to the air holes, but not a length problem. 5mm does make a difference, but I'm not so sure if that is enough. Given the choice between the two I'd rather have a go at modding the plastic bottle though.
Maybe, a) cut lower 1/3 of bottle with a razor, b) insert new top into bottom, c) seal with heat?
I nominate Para to do it, should get near seamless results.
First there was the Ice Drops bottle, then the 3ml came up. I recall something about the shoulder of the 3ml bottle getting close to the air holes, but not a length problem. 5mm does make a difference, but I'm not so sure if that is enough. Given the choice between the two I'd rather have a go at modding the plastic bottle though.
Maybe, a) cut lower 1/3 of bottle with a razor, b) insert new top into bottom, c) seal with heat?
I test fitted it into the LV and the top won' t reach the threads... definitely a loose vape. Modding the bottle might be harder than cutting a new upper tube. The stress of screwing it in will be pretty rough on the seem - I don't think silicone would stand up to it. The heat may be the best way if you can keep the bottle from warping.
wonder if any of these would work....the one with the lv is 1.30 in tall ...I think...
Glass Vials - Specialty Bottle
http://www.discountvials.com/1-Dram-Glass-Vial-Pkg-of-144-p/ct81235-144.htm
Glass Vials - Specialty Bottle
http://www.discountvials.com/1-Dram-Glass-Vial-Pkg-of-144-p/ct81235-144.htm
Last edited:
The best thing about using the LV glass bottles is it is very easy to experiment with DIY e-liquids. Just put in 1 ml of PG/VG,mix your flavors and try it. If you don't like it,just rinse the bottle and try another flavor. Also, unlike polycarbonate,no e-liquids will crack the glass bottle.
Not only that.
I have a bag which carries 32 liquid bottles with a collection of liquids, 2 x 10 ml liquid bottles and a spare Genisis. I can change liquids as I want and if something happens to my Genisis in use I have a spare.
View attachment 82619
The image is not the best but you can see what I mean.
I have a bag which carries 32 liquid bottles with a collection of liquids, 2 x 10 ml liquid bottles and a spare Genisis. I can change liquids as I want and if something happens to my Genisis in use I have a spare.
View attachment 82619
The image is not the best but you can see what I mean.
Not only that.
I have a bag which carries 32 liquid bottles with a collection of liquids, 2 x 10 ml liquid bottles and a spare Genisis. I can change liquids as I want and if something happens to my Genisis in use I have a spare.
View attachment 82619
The image is not the best but you can see what I mean.
Slick setup, is that just for the average workday?
Tai might have to confirm but pretty sure these are the correct bottles....
32 Schraubflschchen braun 1,5 incl. Etiketten (467)
View attachment 82675
32 Schraubflschchen braun 1,5 incl. Etiketten (467)
View attachment 82675
- Status
Similar threads
