GG Transformer
- Thread starter imeothanasis
- Start date
- th_trl_thread_readers 0
- Status
Thanks girl, nice to see you again. You are one piece with Carol, when I see her I expect to see you and the opposite
I must sell the Grant and Nano first and then I will start making these. So as I said before, buy them quickly for your friends. (dont tell them about the transformer)
I must sell the Grant and Nano first and then I will start making these. So as I said before, buy them quickly for your friends. (dont tell them about the transformer)
Holy s**t that thing is awesome!!! Now do I get a GG now or wait for this model?
you need 2
1 for out and about, a smaller model,
and the transformer to play with at home
with all the options to have variety of vape.
so I would suggest 2 of them.
Tribal as you saw to the picture, the diameter is 3mm bigger to hold the 18650 and to put the adapters (they want space too). So its up to you what you want to have.
But if you buy 2 as Di says it better for me!!! xa xa Me and Tim were thinking to keep the smaller diameter putting inside the 14650 battery, 3,6 volt, 1600 maH. Its a option but now we have increase at 3000 mah and 1000 the 6v option (instead of 800).
Its better because there is no battery that GG cant hold (All in one device, you dont need anything else because in one device you have batteries option, adapters option, volts option, room for storage and LENGTH option).
Just feel the uncontrolable need to repost
This is a desigh that my japan friend suzuki told me to use it for free
No its from my Japan friend suzuki. He is very good in designs and he told me to use it for free
Yeah, I know I'm a little late with the congratulations but here they are anyway...
You've completely outdone yourself again Imeo!! You've taken your amazing creation and have made it even better!!! I guess that coffee and mug we sent you really got your mind going... hahaha Good for you and as always keep up the good work!
Now all you need is a US supplier....
You've completely outdone yourself again Imeo!! You've taken your amazing creation and have made it even better!!!
I guess that coffee and mug we sent you really got your mind going... hahaha Good for you and as always keep up the good work!Now all you need is a US supplier....
Yeah, I know I'm a little late with the congratulations but here they are anyway...
You've completely outdone yourself again Imeo!! You've taken your amazing creation and have made it even better!!!
Now all you need is a US supplier....
You are right Mrs, I hadnt thought it before, is this damn coffee that makes the transformer? Please send me more of this magic drink!!! xa xa
Thanks again for your presents guys, you are so beautiful people, the best company is here, we will keep it alive for ever
You are right Mrs, I hadnt thought it before, is this damn coffee that makes the transformer? Please send me more of this magic drink!!! xa xa
Thanks again for your presents guys, you are so beautiful people, the best company is here, we will keep it alive for ever
haha.... we will be sure to send you some more so you can make even more amazing inventions... do you have any flavors your prefer??
haha.... we will be sure to send you some more so you can make even more amazing inventions... do you have any flavors your prefer??
I am just joking. I dont need anything else, you know that its not the present that matters but the "move". You made it, so I know what kind of people you are. The only present I want is to give love and presents to your kids. They must grow with 2 good parents and they must learn not to smoke
As for the supplier stuff, you must talk to Tim, I dont know anything, I only make them, so I put my tail out of this
Last edited:
great job on that transformer GG. I bet if your spoiled the GG it will start transforming on it own....now that would be cool. voice activated GG.....I can see it now. GG i want grant GG with push button in the middle with 3.7v.....bam its ready to go.......
To speak the truth mmm I can make a walking GG, no problem. It could make coffee and other things but its only the cost that stops me and the most important, the immortality.
I saw a thread to puresmoker forum. Casmere was answering to Di. The whole thing is here (with black is Di and with the red is Casmere)
1) if you want the best device, (owner opinion ... and 90% of the owners opinion when they get a new device)
2) hand crafted excellence (and the Prodigy isn't?)
3) simplicity of design and (then why the added expense?)
4) excellence of manufacture (basement full of tools?)
5) no solder, no breakable parts (got the no solder correct, but haven't there already been button issues?)
6) will last a lifetime (make sure to post back when you're 95 ;-))
7) choice of size models (as the Prodigy will be as well)
8) superb vapour production on all models (which 90% of vaporizers do)
9) choice of different battery sizes and strengths (Prodigy - Check)
10) choice of different adapters for different attys (Prodigy - Check)
11) looks sleek and sensuous (And scratched after a weeks use)
12) great throat hit (any 5v+ mod or pv will)
13) terrific flava enhancement of juice (might need to see a plastic surgeon for that one!)
14) total satisfaction of your non-smoking experience (Great!)
My answers are in blue and I translate the Casmere's answers in some points
1) (Translation) You are almost all (90%) stupid guys, you dont know what are you saying.
2) No my friend, the prodigy isnt handmade. Its a factory product and nothing else
3)The added expense is because its a hand made product AND NOT A FACTORY ONE LIKE THE PRODIGY. But you cant understand the cost because you didnt make something with your hands.
4) I dont understand what he means, sorry
5) button issues were with the old button, the one from the stores (like yours), I made my own now, you dont follow the GG threads.
6) If you see a piece of iron and a piece of paper, its not dificult to understand witch will last for ever (exept it is dificult for someone to see simple things)
7) Your choices are separate. My model is all in one
8) Why not 100%?
9) Your choices are separate. My model is all in one (once again)
10) With prodigy you must carry back caps in your bag all the time and they are big, but with GG you carry small pieces and if you want you put them on it and you can carry all pieces in one piece.
11) After a week is better because the attrition with hands makes it better and sleeker. But let me ask: Prodigy cant scratch because its anodised? xa xa. Lets see it after 2-3 weeks. The bad thing is that you cant do anything about it when get scratched but with GG you can sandpaper it and its like new again in mat style
12) Oupssss, something right
13) You said in your video that if you go to 6 volts you cant go back, now what?
And something mine (in black this time)
ARE THEY BROTHERS? Yes in external shape (tube with 2 caps!!!), but its not my fault
I saw a thread to puresmoker forum. Casmere was answering to Di. The whole thing is here (with black is Di and with the red is Casmere)
1) if you want the best device, (owner opinion ... and 90% of the owners opinion when they get a new device)
2) hand crafted excellence (and the Prodigy isn't?)
3) simplicity of design and (then why the added expense?)
4) excellence of manufacture (basement full of tools?)
5) no solder, no breakable parts (got the no solder correct, but haven't there already been button issues?)
6) will last a lifetime (make sure to post back when you're 95 ;-))
7) choice of size models (as the Prodigy will be as well)
8) superb vapour production on all models (which 90% of vaporizers do)
9) choice of different battery sizes and strengths (Prodigy - Check)
10) choice of different adapters for different attys (Prodigy - Check)
11) looks sleek and sensuous (And scratched after a weeks use)
12) great throat hit (any 5v+ mod or pv will)
13) terrific flava enhancement of juice (might need to see a plastic surgeon for that one!)
14) total satisfaction of your non-smoking experience (Great!)
My answers are in blue
and I translate the Casmere's answers in some points1) (Translation) You are almost all (90%) stupid guys, you dont know what are you saying.
2) No my friend, the prodigy isnt handmade. Its a factory product and nothing else
3)The added expense is because its a hand made product AND NOT A FACTORY ONE LIKE THE PRODIGY. But you cant understand the cost because you didnt make something with your hands.
4) I dont understand what he means, sorry
5) button issues were with the old button, the one from the stores (like yours), I made my own now, you dont follow the GG threads.
6) If you see a piece of iron and a piece of paper, its not dificult to understand witch will last for ever (exept it is dificult for someone to see simple things
)7) Your choices are separate. My model is all in one
8) Why not 100%?
9) Your choices are separate. My model is all in one (once again)
10) With prodigy you must carry back caps in your bag all the time and they are big, but with GG you carry small pieces and if you want you put them on it and you can carry all pieces in one piece.
11) After a week is better because the attrition with hands makes it better and sleeker. But let me ask: Prodigy cant scratch because its anodised? xa xa. Lets see it after 2-3 weeks. The bad thing is that you cant do anything about it when get scratched but with GG you can sandpaper it and its like new again in mat style
12) Oupssss, something right
13) You said in your video that if you go to 6 volts you cant go back, now what?
And something mine (in black this time)
ARE THEY BROTHERS? Yes in external shape (tube with 2 caps!!!), but its not my fault
Last edited:
And something else. After the GGTRANSFORMER and the Slim version, they are not brothers anymore
I forgot the last one.
Anodising's cost is 0,80 euros per GG, this cost was 15 days ago. Maybe to make one?
ps....... Di, dont go to these threads, you will loose your lovely humor and your smile
And something else I must say because no one says it. The only reason that prodigy is alive is only because the seller is American, nothing else. If Casmere had the GG in his hands and I had the prodigy, my sales would be on zero.
I am very polite person, you already know that but I dont like good people to get fooled and receive irony out there
Anodising's cost is 0,80 euros per GG, this cost was 15 days ago. Maybe to make one?
ps....... Di, dont go to these threads, you will loose your lovely humor and your smile
And something else I must say because no one says it. The only reason that prodigy is alive is only because the seller is American, nothing else. If Casmere had the GG in his hands and I had the prodigy, my sales would be on zero.
I am very polite person, you already know that but I dont like good people to get fooled and receive irony out there
Last edited:
I added in my post that one of the reasons for the expense is because you are backed by a solid 2 year warranty if something were to go wrong.
For a total of $157.69 USD
Whereas the Prodigy for $139.95 USD supports only a 6 month warranty.
but.. that got quickly buried...
For an extra 20 bucks I'd take the extra year and a half.
People say, well its in America, yes this is true.
But by a "too busy" of supplier, whereas the turn around time would probably be the same.
For a total of $157.69 USD
Whereas the Prodigy for $139.95 USD supports only a 6 month warranty.
but.. that got quickly buried...
For an extra 20 bucks I'd take the extra year and a half.
People say, well its in America, yes this is true.
But by a "too busy" of supplier, whereas the turn around time would probably be the same.
Last edited:
I forgot the warranty, Iken yes you are so right, and I must say something else. My warranty is lifetime in reality. If something happens, I only want the post office money and nothing else. So with 20 $ its not 1,5 years, its 100 years.
Something more. We talk about speed? My customers wanted the 18650 option and I gave it in 3 days!!!!!!!!!!!!. Others suppliers want 6 months for the same.
When I got a GG back (for the old button issue) I send it again to his owner the next day.
And the last one. I ask people what they want and I dont make what I want (5v from 6v, no 18650 now, etc) and I dont collect money and send to people something diferent from what they order at first place.
Iken can you please tell me what the casmere means by the basement full of tools on the Di's question 4?
Something more. We talk about speed? My customers wanted the 18650 option and I gave it in 3 days!!!!!!!!!!!!. Others suppliers want 6 months for the same.
When I got a GG back (for the old button issue) I send it again to his owner the next day.
And the last one. I ask people what they want and I dont make what I want (5v from 6v, no 18650 now, etc) and I dont collect money and send to people something diferent from what they order at first place.
Iken can you please tell me what the casmere means by the basement full of tools on the Di's question 4?
Last edited:
Very true Ike - I mean if you quantify longevity, with the prodigy, $140 for 6 months will cost you $23.33 per month if the prodigy dies the day after 6 months is up. Whereas the GG on the other hand will cost you $6.67 per month if the GG dies the day after the 2 year warranty is up. So the initial $20 extra is only a small price to pay for the long term investment.
Then of course lets face it there is personal preference and both devices look very different. Some people prefer the button placement and looks of the prodigy whilst others prefer the GG..... horses for courses.
Fortunately there is plenty of room in this market for any number of good quality manufacturers making what customers desire, so perhaps we ought to lay this one to rest with some dignity intact.
- Status
Similar threads
