- Status
Yes, kudos...wow, you must have been bored at your in-laws...
Sent from my iPad
Sent from my iPad
Hello! Sure is, plenty here too help you get back on track if we can. If not Perseas will be out of his Genius think tank in a bit to follow up. What gives?
Well I just got the snp today. I'm still pretty new to carto tanks. I have been using smok 3ohm pre punched and ikenvape 3omh pre punched. But for some reason I can't get them to wick properly in the snp. I'm using a 70pg30vg.
Ok, prime fill your carto as usual(get the filler nice and wet).
If your orings are ok and the carto fits snug with the darker orings great, if not insert the light red/orange.
Insert carto tool into carto.Grease the exterior of the carto and carto tool with your juice obviously for ease of insertion and insert so the top of carto and the refill rings are same side up.
Screw outer rings on firm and align the top with full holes so you can fill tank with syringe making sure both tiny orings are in place for a nice seal when ready.
Fill. When full, make sure and tighten the top about 1/4 more turn only to create a nice seal.
The SnP primarily works on a vacuum. If there is none than the tank may leak at the weak point Kir the bottom of carto when using.
Not knowing your pre punch hole set up, make sure the holes are above the tank deck when submirged for juice flow.
We primarily use divers and Leo but traveling my wife prefers a Boge slotted or the larger hole carto.
If they are the smaller hole than an extra punched hole on the opposing side is needed for sure.
Don't give up friend, as the SnP is the finest tank available. Pease feel free to hang out and laugh and learn a bit.
If your orings are ok and the carto fits snug with the darker orings great, if not insert the light red/orange.
Insert carto tool into carto.Grease the exterior of the carto and carto tool with your juice obviously for ease of insertion and insert so the top of carto and the refill rings are same side up.
Screw outer rings on firm and align the top with full holes so you can fill tank with syringe making sure both tiny orings are in place for a nice seal when ready.
Fill. When full, make sure and tighten the top about 1/4 more turn only to create a nice seal.
The SnP primarily works on a vacuum. If there is none than the tank may leak at the weak point Kir the bottom of carto when using.
Not knowing your pre punch hole set up, make sure the holes are above the tank deck when submirged for juice flow.
We primarily use divers and Leo but traveling my wife prefers a Boge slotted or the larger hole carto.
If they are the smaller hole than an extra punched hole on the opposing side is needed for sure.
Don't give up friend, as the SnP is the finest tank available. Pease feel free to hang out and laugh and learn a bit.
Last edited:
Ahhh! They look so nice mate. We will need more pics as they are in use and in patina mode.
Beautiful.
My urge at the moment is to go out and buy white cotton gloves and polish constantly
I'm sure that will pass, but I doubt I will ever be as willing to take the Lux everywhere as I am with my X.
I don't leave home without one, I want people to wow! Use them at your discretion! But, two more caps and switches and you will be in heaven.My urge at the moment is to go out and buy white cotton gloves and polish constantly
I've never quite understood having a beautiful mod that never leaves the house. I take my X everywhere and bore people to death showing them; the Lux may not get quite as many outings - at least in the first month.
If V3 caps and switches fit when they come out next year, I may be very tempted!
Do you know if you can get the short chimney for this kit anywhere? I may buy a kit just in case, especially since I missed out on the other deal. I also see cloud 9 will be getting some here shortly as well.
Great job on the thread Chad! The only thing is you should have waited until most of us get in on the first batch....now I might not get a chance
Are we going to have to order direct from Perseas to get these right away or is he already shipping to the suppliers?
Very nice!
You are correct about the beautiful mod my friend. Oh they will fit!
Great job on the thread Chad! The only thing is you should have waited until most of us get in on the first batch....now I might not get a chance
You know I actually had that thought but just wanted to be the one that started a thread on the atty.
I do not know where to buy the chimney on its own. They are offered on the original body kits as part of.
They have not yet left Sophia. Perseas will have a release date soon for us as he mentioned earlier. He will know more tomorrow or tues..
Domo Vapor Co. will definitely have them for sale when the time comes. Make sure and grab some extra fluff V2 for yourself.
- Status
Similar threads
- Locked
