- Status
Standard serialized PAPS will come in 350. Additional tubes are separate and are not serialized but incredibly reasonable. Top caps and switches are also available when in stock.
Please go to www.VapourArt.com for information. Soon the American supplier will stock out of Portland. His link can be found on VA website.
GL
I'm lovin the draw on this kayfun lite, it's just perfect for me, and lookin good on a gp lux too! What more can a man ask for.
Last edited:
women .I'm lovin the draw on this kayfun lite, it's just perfect for me, and lookin good on a gp lux too! What more can a man ask for.
No more "keep it upright" worries...
In possession for 24-hrs. now, kept flat down the whole night (the first one since Spheroid) -- No Leakage! Chain-Vaped at times, had to cut-down the Nic from the 2nd tank, tried 3 juices (yes, on my 3rd tank-fill now), vapor production is gigantic, taste is fantastic, TH is pretty strong, easy-peesy setting up.
BOTTOMLINE: The K-Lite looks superb on the Paps SS-Brushed. It's texture & hue is very similar, in fact it looks 'same' unless u take it at hand - in which case u can 'feel' the brushed finish of the Paps. Else, it's a complete match. The Paps' "polished SS" end caps - alongwith the "clear tank" - make the combo all the more beautiful... offering a contrasting hint in between a near hybrid look. I purposefully took the pic with a 'colorless juice' (Menthol over Watermelon) to maintain the contrast. Nonetheless, colored juices look equally good in this setup. Overall, this is a lovely atty for our Paps.
In possession for 24-hrs. now, kept flat down the whole night (the first one since Spheroid) -- No Leakage! Chain-Vaped at times, had to cut-down the Nic from the 2nd tank, tried 3 juices (yes, on my 3rd tank-fill now), vapor production is gigantic, taste is fantastic, TH is pretty strong, easy-peesy setting up.
BOTTOMLINE: The K-Lite looks superb on the Paps SS-Brushed. It's texture & hue is very similar, in fact it looks 'same' unless u take it at hand - in which case u can 'feel' the brushed finish of the Paps. Else, it's a complete match. The Paps' "polished SS" end caps - alongwith the "clear tank" - make the combo all the more beautiful... offering a contrasting hint in between a near hybrid look. I purposefully took the pic with a 'colorless juice' (Menthol over Watermelon) to maintain the contrast. Nonetheless, colored juices look equally good in this setup. Overall, this is a lovely atty for our Paps.
No more "keep it upright" worries...
In possession for 24-hrs. now, kept flat down the whole night (the first one since Spheroid) -- No Leakage! Chain-Vaped at times, had to cut-down the Nic from the 2nd tank, tried 3 juices (yes, on my 3rd tank-fill now), vapor production is gigantic, taste is fantastic, TH is pretty strong, easy-peesy setting up.
BOTTOMLINE: The K-Lite looks superb on the Paps SS-Brushed. It's texture & hue is very similar, in fact it looks 'same' unless u take it at hand - in which case u can 'feel' the brushed finish of the Paps. Else, it's a complete match. The Paps' "polished SS" end caps - alongwith the "clear tank" - make the combo all the more beautiful... offering a contrasting hint in between a near hybrid look. I purposefully took the pic with a 'colorless juice' (Menthol over Watermelon) to maintain the contrast. Nonetheless, colored juices look equally good in this setup. Overall, this is a lovely atty for our Paps.
Looks like it was made for the paps.
I havn't used a tank for approx 3 months as back then I hadn't discovered any juices that I enjoyed for more than an hour or so. I now have found a daily vape that I love and only vape that 90% of the time so may revisit the tank scene.
The lite looks like the perfect place to start again if I can find one. Hopefully C9V will some again soon.
And on the lite version, the drip doesn't screw in. You can use any 510 tip like your super t shorties.
on the 3.1 you can also use any drip tip you like, the thread in drip tip for the 3.1 and earlier kayfuns was just to provide a more solid option for on the go that couldnt be pulled out, the lite just comes with a you-know-what shaped one
thats similar to the thread-in one theyve been using beforehand. the only real differences are no collection/condensation/catch chamber, a fill screw on the bottom instead of a fill valve on the side, no air control, and no hybrid connector, other than that it is a 3.1 kayfun. so far i heard good things about it... from what i hear despite the lack of the collection chamber, if set up right they dont leak out the air hole.I guess a little piece of metal can make my day....
Hybrid kayfun 3.1 / Paps 2.5 incoming
Adapter :: Hybrid Connector -
so the actual connection to the battery is just a plastic spacer with different sized SS(<awful conductor) pins to put in it that are not even flat, with very little contact surface? in what way would that be better than a solid 510 connector with flat contacts on both sides and a GP adjustable post? besides the kayfun 3.1 already has a hybrid connector if you take off the collector tank at the base, something that adapts those threads to the 20x1 threads on the paps would be ideal. or if you want to use it with a kayfun lite, maybe if there was something like the GP post that threads into the male 510 connector on the kayfun lite, that would actually be pretty nice imo.
thats actually a pretty awesome idea imo, perseas pretty plz make us a kayfun 3.1 to paps thread atapter?
Last edited:
Yes, thats a ....load of cigarettes. Glad I'm vaping
Sent from my GT-N7100 using Tapatalk 4 Beta
Sent from my GT-N7100 using Tapatalk 4 Beta
I wouldnt attempt it. The Spheroid I am sure was designed with that in mind along with the chamber size, air intake and air tube size. I find it perfect as most everything I own has an airy draw and find it to be much better. I wish everything I owned hit this smooth. Although, mine are not tight at all. Did you buy yours new? or used? The air holes can get juice in them and the need for a good soak in warm water might help your issue a bit. I tend to clean mine out when I rewick as part of maintenance.
GL
I find the draw on mine is a little tighter or airier depending on how high the coil is set off the air intake (in other words, higher = airier), but it won't approach anything like a Genesis-style or bored-out RDA draw.
I couldn't agree more. I find my Spharry perfect, neither tight not loose... just right. Thus, I wouldn't want Perseas to attempt any changes in that.
_______________________________________________________
Ps.: If one had purchased it used - one may relook at the air-hole... b'coz it might be modded by the previous user. Perseas has a YT vid about it... closing/reducing one of the air-holes, there r two.
Take the base apart and tighten the screws to the positive and negative posts. This will allow the 510 pin to sit slightly higher, increasing airflow.
I suppose you have cleaned the interior of the base from any liquid remnants. The air hole has to be 1,2 mm wide, this is the ideal size. Check please yours and if something is not right, inform me.
Last edited:
Would it be Nice if we could also buy Sectional Tubes from Perseas, as accessories, for 18500 and 18650 batteries?
B'coz, I'd love to have extended battery life, but without losing out the happiness of holding my 'original' serial numbered mod.
Just thinking...
B'coz, I'd love to have extended battery life, but without losing out the happiness of holding my 'original' serial numbered mod.
Just thinking...
Would it be Nice if we could also buy Sectional Tubes from Perseas, as accessories, for 18500 and 18650 batteries?
B'coz, I'd love to have extended battery life, but without losing out the happiness of holding my 'original' serial numbered mod.
Just thinking...
I would be happy to just be able to buy a lux w/ two extra tubes. I wanna feel this button everyone keeps talking about.
Would it be Nice if we could also buy Sectional Tubes from Perseas, as accessories, for 18500 and 18650 batteries?
B'coz, I'd love to have extended battery life, but without losing out the happiness of holding my 'original' serial numbered mod.
Just thinking...
then what would i do with all my tubes??
btw there will be, paps X, X for eXtension
- Status
Similar threads
- Locked
