GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 1

[qorax]

Mine is still with Perseas. And to punish me for replacing it, my ecig killed itself on Sunday after more than a year of service. I'm back to disgusting analogs until my Paps arrives

Uh, sad If u were nearby I'd hand u one. Didn't u have a back up? Anything would be better than grabbing those stinkies again...

 

[Idaholandho]

No doubt, go buy one at the store.

VaporArt has thier shipping together, many vendors should take note. It will be here before you know it.

 

[ArtificialSwedener]

Uh, sad If u were nearby I'd hand u one. Didn't u have a back up? Anything would be better than grabbing those stinkies again...

I have an old eGo-style backup (my first ecig). Turns out none of my remaining clearos work with it :/
What are the chances of this happening exactly when I order something new?

At least my order status has changed from "Completed & DHL Error" to "Completed & DHL 1". No idea what it means though.

 

[qorax]

I have an old eGo-style backup (my first ecig). Turns out none of my remaining clearos work with it :/
What are the chances of this happening exactly when I order something new?

At least my order status has changed from "Completed & DHL Error" to "Completed & DHL 1". No idea what it means though.

That eGo is just a power source... if it holds charge it should fire anything atop (as long as it fits)... where's the snag actually?

 

[sircharles]

On phone now so no pics. My avitar has Ithaka on Lux and my sig is LUX with GG UFS and new SS with Ithaka.
I am polishing my KLite now for polished GP tube but have photos at home on PAPS SS at home.
Better seen in my gallery.

i was on the phone earlier
just saw your gallery

Lux looks really good
im glad i ordered one

now DHL need to go pick it up
before piccolo and spheroid shows up online

 

[dxology]

I just realized how much vapemail I have coming in soon. Some ekowool, some ribbon kanthal, an igo-l, a kayfun lite, and a lux. Maybe it will all be in Thursday or Friday cause I'm off from work those days. I'll be like a kid on Christmas.

 

[Idaholandho]

Mine is still with Perseas. And to punish me for replacing it, my ecig killed itself on Sunday after more than a year of service. I'm back to disgusting analogs until my Paps arrives

AAAAHHHHH! No!
VaporArt is much closer to you than me and, I am usually 4 days from delivery to Idaho, USA.
You are going to love it! Your Sweedish friends should also. There are many Swedish-Greeks in Sweden! GL

 

[Idaholandho]

I just realized how much vapemail I have coming in soon. Some ekowool, some ribbon kanthal, an igo-l, a kayfun lite, and a lux. Maybe it will all be in Thursday or Friday cause I'm off from work those days. I'll be like a kid on Christmas.

Nice man! Sounds like you will be busy! The Kayfun is a breeze to set up and when you do secure your switch on the LUX, put the battery in through the top, put the Kayfun on the LUX topcap and set the connection screw(fat one) then adjust the battery screw so there is no battery rattle(about 2 full turns out of the fat screw). Then upon battery changes, remove the atty and topcap together to replace. This will prevent having to re adjust the ring locking mech or messing with it. Perseas taught us that moons ago on the old switches and it becomes habit. You'll see.

 

[Zencoder]

I have to admit,, despite the hicups along the way, domo delivered... just checked.. my extra tubes and switches etc. from them are flying over the US and will be here tomorrow.. now if they can get the other bits.. this might be my go to place...

 

[ArtificialSwedener]

That eGo is just a power source... if it holds charge it should fire anything atop (as long as it fits)... where's the snag actually?

It's an eGo clone. The clearo is ~1mm too wide so I can't screw it on. Unfortunately the few ecigs I have seen in shops around here were all chinese disposable cigarette type ones going for ~$25

 

[UKPaul]

No brushed 2.5 yet.

 

[kiba]

brodaho you got your GG's mixed up, thats an iatty not a ufs

 

[Idaholandho]

brodaho you got your GG's mixed up, thats an iatty not a ufs

I was on my phone and my sig doesnt show so my pea brain was doing its best on memory. Oh, and I suck!

 

[kiba]

^ ten chars of klmao

 

[Idaholandho]

I wanted to share this. This is the wick I now use on the Spheroid - 2 side by side loops of 1.5 ekowool and wire of choice(use a needle to stabilize wick and help wrap coil if needed).
The loops are pulled to size by tails and cut off. The loops lay in perfect angles to sit on the sides of the airtube in contact with the fluff and tend to stay in that position.
I think this is a better option than the figure 8 I was using because these loops will not disfigure or lay down. I can leave the loops 1-2mm longer than fig 8 or tails because these loops flatten easier against the fluff material and have more surface area to draw the juice from the fluff.

 

[qorax]

I wanted to share this. This is the wick I now use on the Spheroid - 2 side by side loops of 1.5 ekowool and wire of choice(use a needle to stabilize wick and help wrap coil if needed).
The loops are pulled to size by tails and cut off. The loops lay in perfect angles to sit on the sides of the airtube in contact with the fluff and tend to stay in that
I think this is a better option than the figure 8 I was using because these loops will not disfigure or lay down. I can leave the loops 1-2mm longer than fig 8 or tails because these loops flatten easier against the fluff material and have more surface area to draw the juice from the fluff.

Thanks for the info/image iDbro. I think this indeed is a better setup... I'll change mine to this today. How did u make those 2 loops? Figure-8 but held vertically?

 

[kiba]

truth. this is nhow my gf does it. but my sausage fingers are too big so i get her to do it lol







after your done wrapping it you pull on the ends to shorten up the bunny ears, then clip the extra with a nail file. here is that same wick setup on a kaypaps

 

[masguapoakosayo]

Is that picture photoshopped? cuz that coil looks too perfect! nice..

 

[qorax]

truth. this is nhow my gf does it. but my sausage fingers are too big so i get her to do it lol







after your done wrapping it you pull on the ends to shorten up the bunny ears, then clip the extra with a nail file. here is that same wick setup on a kaypaps

Fangtastic !
Thanks for those images and setting it straight... I loved it

 

[curisu]

Am I alone in wondering why my lux has been stuck in bulgaria for two days? DHL reports that shipping info has been received but nothing else

Apologies if this is somehow expected, but my other two overseas shipments have tracked just fine and arrived quickly.