GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 1

Status
Not open for further replies.

Idaholandho

Gone Fishin'
ECF Veteran
Verified Member
Dec 8, 2012
7,379
23,171
Reading Naked
Hi everyone and Perseas,

I am new here, but been lurking around for a while, especially in this thread, and trying to learn as much as I can on the GP line of mods.

I'm in the process of searching for my first mech mod and the GP's caught my eyes…the clean lines, the small size, the simplicity, and the subtle elegance is exactly what I am after. Read and watched pretty much every review out there regarding the GP's and all has been positive. I am pretty damn set on getting one, or a couple.

I like the polished look of the Paps 2.1, but thats discontinued now. Just wondering…will there be a Paps 2.5 SS in a mirror finish in the near future, or perhaps on the future silver edition paps? If not anytime soon, then I will attempt to get the 2.5 brushed SS or the X on the 8th.

Thank you all!

Hello Hype! Welcome! (you will get many of those here)
Glad you are here. Perseas will answer the tough questions! Finally, the PAPS 2.1 was AWESOME. Still is in my book but, they are not produced any longer...at least at the moment. The masses prefer the brushed looks due to fingerprints and the ss stands up a bit taller when it comes to a finish that hides the occasional fumble. and they are also beautiful.

I would like to see a limited set of re release in the polish, ss, and lux tube together in a box with matching serials. hint hint Perseas...hint.

Anyway, I am going to make room for the morning crew.

Hang out a while - Great people here.
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com
Hi everyone and Perseas,

I am new here, but been lurking around for a while, especially in this thread, and trying to learn as much as I can on the GP line of mods.

I'm in the process of searching for my first mech mod and the GP's caught my eyes…the clean lines, the small size, the simplicity, and the subtle elegance is exactly what I am after. Read and watched pretty much every review out there regarding the GP's and all has been positive. I am pretty damn set on getting one, or a couple.

I like the polished look of the Paps 2.1, but thats discontinued now. Just wondering…will there be a Paps 2.5 SS in a mirror finish in the near future, or perhaps on the future silver edition paps? If not anytime soon, then I will attempt to get the 2.5 brushed SS or the X on the 8th.

Thank you all!

Hi, welcome aboard!
You can always "add" the v2.1 Polished Tubes additionally to your order of [the current] v2.5 SS Paps. Those are usually available and the new switch fits them perfectly.
 

GB023

Super Member
ECF Veteran
Verified Member
Jun 10, 2012
383
751
Great Northwest
Hi everyone and Perseas,

I am new here, but been lurking around for a while, especially in this thread, and trying to learn as much as I can on the GP line of mods.

I'm in the process of searching for my first mech mod and the GP's caught my eyes…the clean lines, the small size, the simplicity, and the subtle elegance is exactly what I am after. Read and watched pretty much every review out there regarding the GP's and all has been positive. I am pretty damn set on getting one, or a couple.

I like the polished look of the Paps 2.1, but thats discontinued now. Just wondering…will there be a Paps 2.5 SS in a mirror finish in the near future, or perhaps on the future silver edition paps? If not anytime soon, then I will attempt to get the 2.5 brushed SS or the X on the 8th.

Thank you all!

Welcome hype62, you will find everyone here very helpful. BTW 2.1 polished tubs are still available on Vapourart.

oops Q already posted. He is one of the most helpful here !
 
Last edited:

RPadTV

Reviewer / Blogger
ECF Veteran
Verified Member
Oct 12, 2012
3,398
7,551
Planet Awesome
www.rpad.tv


Here's an Aqua by Footoon on a Paps X. They look lovely together, don't you agree? Then again, the Paps X makes every atomizer look handsome. The air-flow control on the Aqua actually looks like the AFC on the Paps X. Ha! So far, I'm enjoying it, but don't think it will replace the Kayfun for me. The greater cloud potential and airier draw will definitely make it a hit with the SoCal crowd.

P.S.: This is the first "cool" serial number I've ever snagged. #0101 ...!!!
 

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com


Here's an Aqua by Footoon on a Paps X. They look lovely together, don't you agree? Then again, the Paps X makes every atomizer look handsome. The air-flow control on the Aqua actually looks like the AFC on the Paps X. Ha! So far, I'm enjoying it, but don't think it will replace the Kayfun for me. The greater cloud potential and airier draw will definitely make it a hit with the SoCal crowd.

P.S.: This is the first "cool" serial number I've ever snagged. #0101 ...!!!

Wow, nice! Lookin' good. 21mm vs. 23mm... you have some cheek Ray :)
 

Kane76

Full Member
Verified Member
Oct 5, 2013
51
81
Phoenix, AZ
Hello everyone...another new member here! Like hype said, I have been reading for a long time, but finally decided to become a member. I've had my Paps SS v2.5 w/18500 & 18650 tubes for a few months now & absolutely love it...along w/my SnP's (22mm & 23mm) currently housing a Sophia in each. The best mech mod that I own to date! That is until I get a GPX tomorrow...if I'm lucky. Reading this thread has been very helpful to me for a long while & really appreciate all of you for that. Thanks to all that are on here & to Perseas...you are a genius! You definitely have a life long customer here sir!
 

perseas

Unregistered Supplier
ECF Veteran
Dec 11, 2011
3,442
17,927
Athens, Hellas
www.vapourart.com
Hi everyone and Perseas,

I am new here, but been lurking around for a while, especially in this thread, and trying to learn as much as I can on the GP line of mods.

I'm in the process of searching for my first mech mod and the GP's caught my eyes…the clean lines, the small size, the simplicity, and the subtle elegance is exactly what I am after. Read and watched pretty much every review out there regarding the GP's and all has been positive. I am pretty damn set on getting one, or a couple.

I like the polished look of the Paps 2.1, but thats discontinued now. Just wondering…will there be a Paps 2.5 SS in a mirror finish in the near future, or perhaps on the future silver edition paps? If not anytime soon, then I will attempt to get the 2.5 brushed SS or the X on the 8th.

Thank you all!

Welcome on board buddy!

Thank you for your appraisal, we don't produce currently our mods middle part in polished finish, but it can be done by the user with the help of a PnB adaptor and a dremel, or by hand.
 

perseas

Unregistered Supplier
ECF Veteran
Dec 11, 2011
3,442
17,927
Athens, Hellas
www.vapourart.com
Hello everyone...another new member here! Like hype said, I have been reading for a long time, but finally decided to become a member. I've had my Paps SS v2.5 w/18500 & 18650 tubes for a few months now & absolutely love it...along w/my SnP's (22mm & 23mm) currently housing a Sophia in each. The best mech mod that I own to date! That is until I get a GPX tomorrow...if I'm lucky. Reading this thread has been very helpful to me for a long while & really appreciate all of you for that. Thanks to all that are on here & to Perseas...you are a genius! You definitely have a life long customer here sir!

Welcome Kane to our thread! Thank you very much for your feedback and support. I informed the rest of our team of your appreciation. The only rule here, is that everyone deserves at least 2 answers for the same question. In other words, the speed and eagerness of the people here to respond and support, many times surprises me. I try not to do less than them.
 
Last edited:

curisu

Super Member
ECF Veteran
Verified Member
Jun 15, 2013
361
657
48
San Francisco
I'll leave this here for those who snub their noses at brushed finishes ;)
mu4atejy.jpg


@perseas, Any chance of getting XL length tanks in either quartz or stainless steel?

I'd be in for two!

Sent from my HTCONE using Tapatalk
 
Status
Not open for further replies.

Users who are viewing this thread