Congrats Chad. Ours is somewhere with a beacon pointed our way and the delivery man headed in the same direction. 
- Status
BUT.... They did secure what was remaining and put it in a sealed plastic bag.
This is not our sticker, what did happen to your parcel? Are the products intact?
Inform me please if something is missing or damaged.
Edit
Finally the rest photos in the photobucket loaded, it is not from Vapourart this.
I hope buddy all is well with your package.
Last edited:
But here's the thing that got me the most. juice missing? Yeah, ok. It's "only" a bottle of juice. But look carefully at three things.
1. "We Care" - to make sure you don't get a COMPLETELY empty envelope so we left you one bottle
2. "the careful removal" - see additional pic below. Notice how it got cut only a little in the center?
3. "Re-occurance" - this is becoming a trend around the country based on others posting photos of their invaded packages.
Oh - perseas - no this is NOT yours. Oops.
This was Juice we ordered.
YOUR treasure chest is almost in our hands, but not yet.
This was Juice we ordered.
YOUR treasure chest is almost in our hands, but not yet.
Perseas. THIS is yours. And this is SMART packing.
And who knows what may have fallen out if it wasn't for this
Time to play.
And who knows what may have fallen out if it wasn't for this
Time to play.
But here's the thing that got me the most. Juice missing? Yeah, ok. It's "only" a bottle of juice. But look carefully at three things.
1. "We Care" - to make sure you don't get a COMPLETELY empty envelope so we left you one bottle
2. "the careful removal" - see additional pic below. Notice how it got cut only a little in the center?
3. "Re-occurance" - this is becoming a trend around the country based on others posting photos of their invaded packages.
Wow. I have heard about people at the post office doing that. It's so sad. That's a federal crime, you would think they would be eyeballing every employee so that things like this don't happen. I'm sure they have had tons of complaints about it already. I mean come on! Disgusting.
I'd be calling every PO around demanding a refund.
Perseas, I just wanted to say that I love the fact you use DHL. I ordered at the start of Vapour Day (the wee small hours of Saturday morning here). Australian customs must have been very co-operative, because my third SnP and two lovely drip tips were delivered safely lunchtime Thursday Sydney time (Wednesday night in Europe)!!! That's pretty spectacular
Thank you very much Perseas for sending the replacement Spheroid and drip tip.. Gave it a bath, setup silica and coil, and had a vape. Well the flavour is outstanding. Really great! I'll let her do her magic on the Bagua for now. I will re-unite her with her family member Picolo once I manage to adopt one. For now:
The only item I still need to fix is fully tightening down the tube to the atty. I could only get it this far with the 0 ring gap. I didn't want to force further knowing I'd have problems unscrewing. I'm thinking next time I try to re-screw on opposite sides of the tube?
The only item I still need to fix is fully tightening down the tube to the atty. I could only get it this far with the 0 ring gap. I didn't want to force further knowing I'd have problems unscrewing. I'm thinking next time I try to re-screw on opposite sides of the tube?
Try screwing the Spheroid together before putting it on your mod. I don't have any problem taking her apart. If you do, just wrap a wide rubber band around it to improve your grip.
Sent from my iPad
Sent from my iPad
Hello All! Only have a second right now but, this has worked well for me with
Micro - 30 ga wrapped 1/16 drill bit 9/10 wraps - 1.5ish ohmsish. Organic cotton only.
I have others and I prefer 30 guage.....later for these
NR R NR Dbro
Thanks bro. I some how twisted it up in my mind, and then fell into a trance thinking about it.
30g - resistance wire -
30g - no resistance wire -
1/16" drill bit -
I've everything I need, and I have a zapper that I've yet to use. It's foreign territory to me, so it's remained on the shelf. I need to get off my rump and get to it.
SorryThanks bro. I some how twisted it up in my mind, and then fell into a trance thinking about it.
30g - resistance wire -
30g - no resistance wire -
1/16" drill bit -
I've everything I need, and I have a zapper that I've yet to use. It's foreign territory to me, so it's remained on the shelf. I need to get off my rump and get to it.
I am not paying attention but what do you need for NR wires? The spheroid?
I appreciate Kat messing around with them as he often gets bored
. I have known him to weave his own ekowool, grow his own cotton and hemp....at least he said it was strictly for wicks, sure!Anyway, there is no need at all. Unless I am missing some huge benefactor, although doubt it. We shouldn't take extra steps to cause failure or headaches. I join wires for GG and divers, no more. I have little choice with those.
i may have missed an entire conversation and am sorry if so. I will read back when there is time.
Sorry
I am not paying attention but what do you need for NR wires? The spheroid?
I appreciate Kat messing around with them as he often gets bored
Anyway, there is no need at all. Unless I am missing some huge benefactor, although doubt it. We shouldn't take extra steps to cause failure or headaches. I join wires for GG and divers, no more. I have little choice with those.
i may have missed an entire conversation and am sorry if so. I will read back when there is time.
ID, I've led you astray my friend. I posted my questions here, because this is my fam and your knowledge is trusted. The setup is for my Diver v1&v2.
WOW WOW WOW...I am probably late to the party and everyone already knows this and Perseas, George, and Miro are really tired of hearing this ( ) but I think I will say it anyway...WOW...this machining and quality is 2nd to NONE! Seriously - NONE!!
I expected quality...I expected good machining....but WOW...I REALLY AM SHOCKED! Everything is heavy...butter smooth...silk.
I am truly in a a state of amazement!
This X is crazy GORGEOUS and the button??? OMG!! and I am not thrilled with bottom buttons...but wow!...the SnP's are beyond precise. Sophia byLeo in the SnP = FANTASTIC! INCREDIBLE! The pressure is a bit different and has a bit of a learning curve for me and definitely replace the two brown top cap orings for just one orange oring and make sure you "lube" the oring after so you can turn the Sophia. Did I mention WOW? WOOOOWWWW!
) but I think I will say it anyway...WOW...this machining and quality is 2nd to NONE! Seriously - NONE!!I expected quality...I expected good machining....but WOW...I REALLY AM SHOCKED! Everything is heavy...butter smooth...silk.
I am truly in a a state of amazement!
This X is crazy GORGEOUS and the button??? OMG!! and I am not thrilled with bottom buttons...but wow!...the SnP's are beyond precise. Sophia byLeo in the SnP = FANTASTIC! INCREDIBLE! The pressure is a bit different and has a bit of a learning curve for me and definitely replace the two brown top cap orings for just one orange oring and make sure you "lube" the oring after so you can turn the Sophia. Did I mention WOW? WOOOOWWWW!
WOW WOW WOW...I am probably late to the party and everyone already knows this and Perseas, George, and Miro are really tired of hearing this (
I expected quality...I expected good machining....but WOW...I REALLY AM SHOCKED! Everything is heavy...butter smooth...silk.
I am truly in a a state of amazement!
This X is crazy GORGEOUS and the button??? OMG!! and I am not thrilled with bottom buttons...but wow!...the SnP's are beyond precise. Sophia byLeo in the SnP = FANTASTIC! INCREDIBLE! The pressure is a bit different and has a bit of a learning curve for me and definitely replace the two brown top cap orings for just one orange oring and make sure you "lube" the oring after so you can turn the Sophia. Did I mention WOW? WOOOOWWWW!
Say it again! I'm gathering that you are impressed with your GP venture
WOW WOW WOW...I am probably late to the party and everyone already knows this and Perseas, George, and Miro are really tired of hearing this (
I expected quality...I expected good machining....but WOW...I REALLY AM SHOCKED! Everything is heavy...butter smooth...silk.
I am truly in a a state of amazement!
This X is crazy GORGEOUS and the button??? OMG!! and I am not thrilled with bottom buttons...but wow!...the SnP's are beyond precise. Sophia byLeo in the SnP = FANTASTIC! INCREDIBLE! The pressure is a bit different and has a bit of a learning curve for me and definitely replace the two brown top cap orings for just one orange oring and make sure you "lube" the oring after so you can turn the Sophia. Did I mention WOW? WOOOOWWWW!
No pics. Fail.
Chad, I haven't had time for Pics...I'm too busy with Sophia and her new accessories !!!
I promise, I will!!!
What's a decent charger? Cheaper than a Pila? I have a Pila currently, but will need another soon for a trip. Really don't wanna drop $50, but don't wanna sacrifice reliability either.
Gimmie the scoop! Hit me with some feedback!
Gimmie the scoop! Hit me with some feedback!
I think I had my tank cleaned and set up with Sofia inside and a pic on the forum within 20 minutes of the DHL truck getting here lol.
- Status
Similar threads
- Locked
