GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 1

[chadsmo]

throwback8" data-source="post: 11886977" class="bbCodeBlock bbCodeBlock--expandable bbCodeBlock--quote js-expandWatch">

Absolutely. I started off with 2 VTC3's and found them to be stellar. Once I saw the VTC4's come up it was a no brainer and I snagged 4 of them. The life on them is utterly impressive when you consider the fact they have a 30 amp continuous limit.

Yup. In the last 11 months of vaping I havnt used a ton of mechs. I own them and I use them now and then but not as ADVs. Last week I got Origen and two of the VTC4s so I've been using my mech a lot more. I used if all day at work, then when I got home I checked the battery and it was 3.9 …? What? So vaped all through a movie on the couch for two hours and it was still going. It's pretty crazy actually. They need to make 350 and 500 versions too!

 

[Jojobo]

Just to make it clear, cell phones, mods to include anything vape related, books, food, tv, gardening tools, tig welders, friends, sheep, stray animals, shop tools, pillows, furniture and more are absolutely banned from any of the bathrooms in our home. Even the thought makes me shutter with disgust .

ROFLMAO...does that include when it is time for a TUBBY?

 

[yankeebobo]

I just took down two spheroids, my lux, and SS paps for a clean down. Course I left the patina on.
Fresh vape.

 

[chadsmo]

I just took down two spheroids, my lux, and SS paps for a clean down. Course I left the patina on.
Fresh vape.

What's your lux looking like and how old is it. I think I'll be ordering one with my Heron.

 

[Peter_C]

Ok. Sitting here, picturing me doing my business petting my dog

And???

How on earth do you get the door shut in time? 3 dogs here, am lucky if the whole crew doesn't follow me in...

 

[yankeebobo]

What's your lux looking like and how old is it. I think I'll be ordering one with my Heron.

Looking really nice. I'll have to take a pic when I have more light. This is THE nicest patina I've seen. Period.

Oh. And about a month.

 

[yankeebobo]

And???

How on earth do you get the door shut in time? 3 dogs here, am lucky if the whole crew doesn't follow me in...

I give them that look. My eyes triple in size. They wimper and walk away.

 

[digitals]

@millertime:

I PMd you, but thought I would let you know that I mailed your DT out this morning. I always ship Flat Rate, so give it a couple days and you should have it.

 

[Pathology]

So, I have a "classy" GP drip tip....but it doesn't fit in any of my mods... The metal is too big. Its not the O-rings because it doesn't make it that far. I've tried twisting, wiggling, forcing...everything. The best I've gotten is it in about 1mm and it gets stuck and I have to pry it out (with pliers..).

Any idea what's up? Are these meant only for specific atties or what?

..Sent from the vape lair..

 

[landman2k1]

So, I have a "classy" GP drip tip....but it doesn't fit in any of my mods... The metal is too big. Its not the O-rings because it doesn't make it that far. I've tried twisting, wiggling, forcing...everything. The best I've gotten is it in about 1mm and it gets stuck and I have to pry it out (with pliers..).

Any idea what's up? Are these meant only for specific atties or what?

..Sent from the vape lair..

What atties? My GP tips work on my Kayfuns, Sophias, Origen dripper, and both Senios...

Edit: It is a little tight on the Taifun GT, just checked, but still fits. You may need to hit up P. =)

 

[Pathology]

What atties? My GP tips work on my Kayfuns, Sophias, Origen dripper, and both Senios...

Edit: It is a little tight on the Taifun GT, just checked, but still fits. You may need to hit up P. =)

Origen Dripper, Trident, Nimbus, and a couple of carto tanks.





..Sent from the vape lair..

 

[chadsmo]

North American dwelling GP veterans, got a quick one for you. My order made in to the East Midlands UK sort centre not long ago. Chances for Friday delivery to western canada ?

 

[digitals]

So, I have a "classy" GP drip tip....but it doesn't fit in any of my mods... The metal is too big. Its not the O-rings because it doesn't make it that far. I've tried twisting, wiggling, forcing...everything. The best I've gotten is it in about 1mm and it gets stuck and I have to pry it out (with pliers..).

Any idea what's up? Are these meant only for specific atties or what?

..Sent from the vape lair..

I've only had one issue with the Orings, but never the DT not fitting due to width.

I would certainly PM Perseas as I am sure he would want to know.

 

[chadsmo]

Origen Dripper, Trident, Nimbus, and a couple of carto tanks.


..Sent from the vape lair..

I'm going to pull an Idaho here and say PM Perseas about that and he'll sort it out for you.

 

[Idaholandho]

ROFLMAO...does that include when it is time for a TUBBY?

I do not have the attention span for one, your just mocking me . D is the bath Queen with her iPad...her 2nd iPad *cough.

I just took down two spheroids, my lux, and SS paps for a clean down. Course I left the patina on.
Fresh vape.

Ah fresh vapes are the best.

Looking really nice. I'll have to take a pic when I have more light. This is THE nicest patina I've seen. Period.

Oh. And about a month.

The patina is gorgeous huh? It ages at a nice pace and a bright feel good patina. The best patina in the biz. Unlike the plutonium enriched metal tubes of some.
This makes me want more.

 

[landman2k1]

This makes me want more.

I'm sure you have other rooms to "furnish"!

 

[Akdare]

North American dwelling GP veterans, got a quick one for you. My order made in to the East Midlands UK sort centre not long ago. Chances for Friday delivery to western canada ?

Obsess much?


Sent from my iPad

 

[Pathology]

I would, but I doubt there's much he can do. I got it in a trade, and I had to use pliers on it (had a towel around the tip to prevent scratching) in a twisting motion, and it caused a faint line around the middle of it. Wouldn't seem right asking him to rectify a problem when I got it second hand then scratched it. It was either the tip or my Origen Dripper lol... I tried everything for several hours to get it out before I had to use pliers. Had to either grip the tip or the atty...had to choose the tip

Its not like...destroyed. Just blemished with a perfect faint line all the way around it :\

..Sent from the vape lair..

 

[Idaholandho]

So, I have a "classy" GP drip tip....but it doesn't fit in any of my mods... The metal is too big. Its not the O-rings because it doesn't make it that far. I've tried twisting, wiggling, forcing...everything. The best I've gotten is it in about 1mm and it gets stuck and I have to pry it out (with pliers..).

Any idea what's up? Are these meant only for specific atties or what?

..Sent from the vape lair..

This we can answer
Please pm your address and I will gladly send replacements. I have posted many times before your time on a couple of forums that King P sent me 100 or more Orings for those that may have issue. There is no cost to you as I have sent plenty out on ECF.
If twisting and quick snapping in or very carefully and slowly inserting fails I've got some left. Doesn't matter I would like to send some regardless. Let me know how many you need . Happy to help.

 

[digitals]

I would, but I doubt there's much he can do. I got it in a trade, and I had to use pliers on it (had a towel around the tip to prevent scratching) in a twisting motion, and it caused a faint line around the middle of it. Wouldn't seem right asking him to rectify a problem when I got it second hand then scratched it. It was either the tip or my Origen Dripper lol... I tried everything for several hours to get it out before I had to use pliers. Had to either grip the tip or the atty...had to choose the tip

Its not like...destroyed. Just blemished with a perfect faint line all the way around it :\

..Sent from the vape lair..

Nonetheless, I would still PM Perseas, so that he knows there may be devices the GP tips do not fit. It may be of concern to him.