GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 1

Status
Not open for further replies.

crss

Ultra Member
ECF Veteran
Verified Member
  • Mar 19, 2013
    1,699
    4,415
    dev/null
    Clear R91.jpg R91 + clear parts on my v2 paps.
    nano-klite-v2_PAPS.jpg KLite nano on same paps.
    PAPSv2.5-n-Stratus22.jpg Stratus22 on my v2.5 paps
    The kayfun style attys are good. The gennies, i get better flavor. The taifun GT, a must have.
     

    crss

    Ultra Member
    ECF Veteran
    Verified Member
  • Mar 19, 2013
    1,699
    4,415
    dev/null
    The nano kayfuns are really nice! Only thing that sucks is the chimney sticking up and my drip tips dont fit. Had to bore out the threaded kayfun tip for now till i can counter sink a relief on my favorite tip.
    Then there is the nano kit + small chimney cap, also a medium kit here. kayfun - Gr-Modders
    I did have to drill out my DT, my nano kit was purchased in July from RV. I like the 22mm hybrid tubes now available for the Kayfuns.
     

    rodsky77

    Super Member
    ECF Veteran
    Verified Member
    Oct 25, 2013
    973
    1,863
    Switzerland
    The nano kayfuns are really nice! Only thing that sucks is the chimney sticking up and my drip tips dont fit. Had to bore out the threaded kayfun tip for now till i can counter sink a relief on my favorite tip.

    The kit is supposed to have a smaller chimney an the tip should then fit? It doesn't fit even with the smaller chimney?

    Sent from my GT-N7100 using Tapatalk
     

    rodsky77

    Super Member
    ECF Veteran
    Verified Member
    Oct 25, 2013
    973
    1,863
    Switzerland
    If you can find one in stock...

    I picked one up here. It still enroute, will report back when I get it.

    I thought about getting one, but then I like my KFLs the way they are. The question of the day is: Kayfun Mini or one more Spheroid for my microstick - need to be able to switch flavors.

    Sent from my GT-N7100 using Tapatalk
     

    landman2k1

    Super Member
    ECF Veteran
    Verified Member
    Jul 2, 2013
    793
    2,794
    McKinney, Texas
    I thought about getting one, but then I like my KFLs the way they are. The question of the day is: Kayfun Mini or one more Spheroid for my microstick - need to be able to switch flavors.

    Sent from my GT-N7100 using Tapatalk

    I have been thinking about the KF mini lately. It seems to be the best option if you are looking for slim form with a window.

    Edit: Idaho posted a few pages back... he likes the mini, that gives me enough confidence to purchase. =)
     

    rodsky77

    Super Member
    ECF Veteran
    Verified Member
    Oct 25, 2013
    973
    1,863
    Switzerland
    I have been thinking about the KF mini lately. It seems to be the best option if you are looking for slim form with a window.

    Edit: Idaho posted a few pages back... he likes the mini, that gives me enough confidence to purchase. =)

    Cool :)

    One concern though, read somewhere that they have issues when they are one third full.

    @Idaho is it true?

    Sent from my GT-N7100 using Tapatalk
     
    Last edited:

    Akdare

    Ultra Member
    ECF Veteran
    Verified Member
    Sep 25, 2013
    1,878
    5,447
    DFW, Texas
    I have been thinking about the KF mini lately. It seems to be the best option if you are looking for slim form with a window.

    Edit: Idaho posted a few pages back... he likes the mini, that gives me enough confidence to purchase. =)

    I also have the kayfun mini...love it. May even be better than the KFL. Got the full kit at cloud9.

    I bought the nano kit from rampage...it is only the two shorter rings, no shorter chimney. You cannot use the kayfun drip tip, as the chimney extends thru the chimney oring too far, but I had a couple of other tips that work fine. My issue with the nano kit it that it only holds 1.5ml.

    I have since rebuilt it using only one of the shorter rings, and one of the standard rings...hold 3 ml, kayfun drip tip fits, 5 mm shorter than the original. Seems to be the best compromise for me, YMMV.


    Sent from my iPad
     

    landman2k1

    Super Member
    ECF Veteran
    Verified Member
    Jul 2, 2013
    793
    2,794
    McKinney, Texas
    Cool :)

    Sent from my GT-N7100 using Tapatalk

    If you don't already have Spheroid, that would definitely be the way to go for the microstick. You won't find better... After re-reading your post, it sounds like maybe you don't have either one yet. If that's the case, Spheroid, hands down. =)
     
    Last edited:

    Akdare

    Ultra Member
    ECF Veteran
    Verified Member
    Sep 25, 2013
    1,878
    5,447
    DFW, Texas
    @rodsky, the only issue I had with mine is in long mode, it's 7ml...and I had a little trouble getting it to start wicking correctly. But I may have filled it a little much. Solved it with a pull with the airhole covered, and a dry pull every so often. The issue went away after I'd vaped 1-2ml.


    Sent from my iPad
     

    rodsky77

    Super Member
    ECF Veteran
    Verified Member
    Oct 25, 2013
    973
    1,863
    Switzerland
    I also have the kayfun mini...love it. May even be better than the KFL. Got the full kit at cloud9.

    I bought the nano kit from rampage...it is only the two shorter rings, no shorter chimney. You cannot use the kayfun drip tip, as the chimney extends thru the chimney oring too far, but I had a couple of other tips that work fine. My issue with the nano kit it that it only holds 1.5ml.

    I have since rebuilt it using only one of the shorter rings, and one of the standard rings...hold 3 ml, kayfun drip tip fits, 5 mm shorter than the original. Seems to be the best compromise for me, YMMV.


    Sent from my iPad

    Any issues with the Mini performance wicking or otherwise when 1/3 or less full?

    Cloud9 has 2 kits with the shorter chimney here: Cloud 9 Vaping - electronic cigarettes, e-liquid & e-smoking supplies

    That's the thing - 1.5ml is just not enough.
     

    rodsky77

    Super Member
    ECF Veteran
    Verified Member
    Oct 25, 2013
    973
    1,863
    Switzerland
    If you don't already have Spheroid, that would definitely be the way to go for the microstick. You won't find better... After re-reading your post, it sounds like maybe you don't have either one yet. If that's the case, Spheroid, hands down. =)

    Just got one and love it :)

    Just thinking whether I should get a 2nd one for another flavor or the KF Mini :)
     

    rodsky77

    Super Member
    ECF Veteran
    Verified Member
    Oct 25, 2013
    973
    1,863
    Switzerland
    @rodsky, the only issue I had with mine is in long mode, it's 7ml...and I had a little trouble getting it to start wicking correctly. But I may have filled it a little much. Solved it with a pull with the airhole covered, and a dry pull every so often. The issue went away after I'd vaped 1-2ml.


    Sent from my iPad

    I see, thanks :) I doubt that I would run it in the 7ml mode - too long :)
     

    crss

    Ultra Member
    ECF Veteran
    Verified Member
  • Mar 19, 2013
    1,699
    4,415
    dev/null

    INFRNL

    Super Member
    ECF Veteran
    Verified Member
    Dec 3, 2013
    866
    2,439
    Colorado
    Did someone say something about KFL+ and nano kits:D
    IMO, KFL+ is a must have atty. I like the nano kits because I like things to be as stealth as possible. I am not a fan of the mini kits. If you get the teamrampage nano kits, you will have to trim your chimney with a dremel. Leo and GP tips will not sit fully flush in the KFL. The Leo tips get close, but not fully seated properly.

    Flavor is amazing on the KFL's There is a flavor difference between KFL and spheroid, but both good, must have both.
     
    Status
    Not open for further replies.

    Users who are viewing this thread