GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 1

Status
Not open for further replies.

qorax

ECF Guru
ECF Veteran
Verified Member
Mar 6, 2013
12,652
41,477
Brampton, Canada
www.facebook.com
Origen setup - 3mm eco, 30 guage, organic cotton stuffed in well on top of eco.
.9/1.0 ohms

bzYHBcv.jpg

Wow, fantastic! That's one beautiful build indeed!
 

Kataphraktos

Vaping Master
ECF Veteran
Verified Member
May 1, 2013
3,241
10,032
New York, NY
chadsmo, you may have a point about cheap attys. I tried out a dual coil setup in my Dripper Spiral yesterday, 1.0 ohm around 2mm Ekowool. I thought it would taste like whale urine, but it is actually very very good. I know anything less than about 1.2 ohms is terrible for me in all of my other attys, but perhaps it is meant for my drippers.
 

Idaholandho

Gone Fishin'
ECF Veteran
Verified Member
Dec 8, 2012
7,379
23,171
Reading Naked
Good idea with the cotton. Does the eco get pushed to the side?

No, the eco is laying on both bottom wells.
k1gPyK9.jpg

It is too thick to double up and popped out. So I just stuffed it on top of the eco. I may snip the eco in the well off and just use the cotton in the well. This set up is fantastic.
 

chadsmo

Vaping Master
ECF Veteran
Verified Member
Feb 16, 2013
5,267
11,281
BC Canada
chadsmo, you may have a point about cheap attys. I tried out a dual coil setup in my Dripper Spiral yesterday, 1.0 ohm around 2mm Ekowool. I thought it would taste like whale urine, but it is actually very very good. I know anything less than about 1.2 ohms is terrible for me in all of my other attys, but perhaps it is meant for my drippers.

Yup. The whole IGO line of attys , while cheap and totally beginner friendly , aren't great. Bad chamber design and bad air flow design is a big part of that.
 

Idaholandho

Gone Fishin'
ECF Veteran
Verified Member
Dec 8, 2012
7,379
23,171
Reading Naked
Nice looking setup idaho..... How you like the origen?

It is hands down the best drippers I have ever had(was a Trident fan as well). As said previously, I have owned quite a few and never cared for the warm vapes and the rat nested wicks in some. This is an easy set up with 1.2/1.5/2.0mm airholes with great production and a pleasant ton of vapor. Talking with Yankeestud, unknowingly pushed me a bit and I bought one impulsively like everything except GP and i really like it.
 

chadsmo

Vaping Master
ECF Veteran
Verified Member
Feb 16, 2013
5,267
11,281
BC Canada
It is hands down the best drippers I have ever had(was a Trident fan as well). As said previously, I have owned quite a few and never cared for the warm vapes and the rat nested wicks in some. This is an easy set up with 1.2/1.5/2.0mm airholes with great production and a pleasant ton of vapor. Talking with Yankeestud, unknowingly pushed me a bit and I bought one impulsively like everything except GP and i really like it.

Agreed. I really love mine.
 

bots

Senior Member
ECF Veteran
Feb 22, 2013
192
297
AT
Just curious... does anyone use the SnP 23 on their PAPS 2.3/2.5. I'm just wondering if that extra 1mm on the tank is going to bother me ...

it works, but ...

if you get yourself a 23mm SnP for your 22mm Paps ...

you will order a 22mm SnP after that ...

and then ...

you will be crazy for v.day to order an X for the 23mm SnP lying around ;) like me :)
 
Last edited:

Doublek79

Super Member
ECF Veteran
Verified Member
Nov 17, 2013
333
639
Ewood ohio
chadsmo, you may have a point about cheap attys. I tried out a dual coil setup in my Dripper Spiral yesterday, 1.0 ohm around 2mm Ekowool. I thought it would taste like whale urine, but it is actually very very good. I know anything less than about 1.2 ohms is terrible for me in all of my other attys, but perhaps it is meant for my drippers.

I'm a bit curious as to how you know what whale urine tastes like??:?::D
 

yankeebobo

Vaping Master
ECF Veteran
Verified Member
Jun 23, 2012
7,046
21,034
Western MA
It is hands down the best drippers I have ever had(was a Trident fan as well). As said previously, I have owned quite a few and never cared for the warm vapes and the rat nested wicks in some. This is an easy set up with 1.2/1.5/2.0mm airholes with great production and a pleasant ton of vapor. Talking with Yankeestud, unknowingly pushed me a bit and I bought one impulsively like everything except GP and i really like it.

At the price point, it is a must try for sure. Having one is a great move. Of course mine currently has the same micro in it as the spheroid has. The couple dual builds I tried didn't fair well. But you know me, I'll get another going. :)
 

rodsky77

Super Member
ECF Veteran
Verified Member
Oct 25, 2013
973
1,863
Switzerland
Hi all :)

Has anyone noticed any flavor changes when you use Juwel pads in the Spheroid?
I bought some pads (Jumbo, white) in anticipation of the Spheroid - they will probably last me for the next 20 years :oops: (just the same as what people experienced with buying a bag of sera wool - you just don't need that much), and decided to try them as the filler. And I can't tell whether it's the filler that's messing with the flavor of the juice or something else. Did you wash your Juwel pads prior to use?

Thanks in advance.
 

perseas

Unregistered Supplier
ECF Veteran
Dec 11, 2011
3,442
17,927
Athens, Hellas
www.vapourart.com
Hello and good morning to all :)

We implemented the payment settings of Vapour Art Store with the express checkout. There is no need anymore for login to our site or to have a Paypal account in order to make a purchase. The next days we shall open the store for a limited number of pre orders of upcoming products which will work independently from the Vapourday's batches.
 

rodsky77

Super Member
ECF Veteran
Verified Member
Oct 25, 2013
973
1,863
Switzerland
Hello and good morning to all :)

We implemented the payment settings of Vapour Art Store with the express checkout. There is no need anymore for login to our site or to have a Paypal account in order to make a purchase. The next days we shall open the store for a limited number of pre orders of upcoming products which will work independently from the Vapourday's batches.

Great news Perseas! :)

So, these orders will work on a different timeline from the Vapour days, will the timeline be specified during the order, or will you just have a set timeline like shipping 15-45 days from the date of the order?
 

Pathology

Ultra Member
ECF Veteran
Verified Member
Mar 1, 2013
1,128
3,492
35
Vienna, IL
Build edit - removed the cotton - I like to see the wick surrounded by copious puddles of juice.


and whoda thunk? No leaks.

I stopped using a loop/U-wick design in my builds because it kept stealing more juice from one side than the other lol. I cut the top off now and it works great and even.
 

Pathology

Ultra Member
ECF Veteran
Verified Member
Mar 1, 2013
1,128
3,492
35
Vienna, IL
Hello and good morning to all :)

We implemented the payment settings of Vapour Art Store with the express checkout. There is no need anymore for login to our site or to have a Paypal account in order to make a purchase. The next days we shall open the store for a limited number of pre orders of upcoming products which will work independently from the Vapourday's batches.

Well you'll be seeing quite a few preorders from me next month!
 

millertime660

Vaping Master
ECF Veteran
Verified Member
Oct 24, 2008
3,003
3,456
43
Central Mass
Hello and good morning to all :)

We implemented the payment settings of Vapour Art Store with the express checkout. There is no need anymore for login to our site or to have a Paypal account in order to make a purchase. The next days we shall open the store for a limited number of pre orders of upcoming products which will work independently from the Vapourday's batches.

"Uh oh" said my bank account!
 
Status
Not open for further replies.

Users who are viewing this thread