GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 1

[TroyDestroy]

Shipping Notification Received

-Ordered at 8:08am today
-Shipping email received at 11:33am today

Man, that is Super-Fast !

what you order this time qorax?

be aware the notification is just them printing labels, might not go out to delivery company until tomorrow or Monday, fast none the less

 

[philip100]

yall can keep your gennies... i got tired of stained shirts and sticky pockets!

they are sharp looking though!

Well... I'm gennie lover . The only ceramic-wick powered atty that I still use is a Spheroid, which is freaky awesome in case of taste

That's pathetic
Who the hell would put economic gas engine into a F1 bolid cover???

 

[negrete35]

Well... I'm gennie lover . The only ceramic-wick powered atty that I still use is a Spheroid, which is freaky awesome in case of taste

That's pathetic
Who the hell would put economic gas engine into a F1 bolid cover???

What is on top of this Paps/Gus?

 

[negrete35]

Soon, LUX will stop to be produced to make room for the Silver Edition, but we'll continue to support it.

So will this be the same as the prototype we saw on Facebook, the brushed finish, but polished "engraving"?

 

[Jacoji]

I'm glad I ordered replacement 2.5 switches today - there is a lot of hissing when I change between the 2.5-buttoned PAPS and the 2.1-buttoned PAPS and set it down without thinking (which is every time).

 

[Idaholandho]

I'm glad I ordered replacement 2.5 switches today - there is a lot of hissing when I change between the 2.5-buttoned PAPS and the 2.1-buttoned PAPS and set it down without thinking (which is every time).

J! Yes I am not good at the drunk test. 4 times, 4 coils, 3 batteries for me. But, you know this and I suspect it does not suprise you so, shutup girl

 

[Jacoji]

J! Yes I am not good at the drunk test. 4 times, 4 coils, 3 batteries for me. But, you know this and I suspect it does not suprise you so, shutup girl

I was expecting an "I told you so" from you.

 

[kiba]

chris which mod is a copy? if you mean the astro, i dont think its a copy... poorly designed maybe, but not a copy.

I just ordered an Arrow that is going to look soooo good on the piccolo and allow me to use a genesis atty on the road.

Raises and bonuses are always good

the arrow is a very nice atty, my gf had one for about a week, but traded it for a mini micro, the reason being that it is 17mm, for the bagua which is 17mm, my gf's piccolo 2.5 is 16mm, and the 3.0 piccolos have a top cap that tapers down to 16mm at the top, so you may have a bit of a gap, or ledge with the arrow. only about 1mm though. but thats the main reason she went with the mini micro instead of the arrow, for her piccolo.

Hello GP. Good day to all! Hope everyone got to order what they needed today.
Someone's using my Bully Tip and Zau for their photoshop projects. Hmmmm. And, Although nice, I believe there are many better funtioning choices than the Caravella atty or the ZAU for that matter.

thats a senesis, i think theyre pretty sweet and they have a solid brass post, pedro was supposed to make a genny but never did.

 

[kiba]

btw perseas, got any new paps x pics for your dedicated followers to drool over

 

[negrete35]

Yeah, what kiba said.

 

[qorax]

what you order this time qorax?

be aware the notification is just them printing labels, might not go out to delivery company until tomorrow or Monday, fast none the less

The v2.5 Media Blasted SS this time.



Yep I know, but still pretty fast as u correctly stated.

 

[negrete35]

The v2.5 Media Blasted SS this time.

View attachment 220621

Yep I know, but still pretty fast as u correctly stated.

So, this is considered media blasted and not brushed?

 

[perseas]

So will this be the same as the prototype we saw on Facebook, the brushed finish, but polished "engraving"?

Yes, the tube will be like that, we are still testing the button, if it will be silver plated or something else.

btw perseas, got any new paps x pics for your dedicated followers to drool over

I'll post photos, but not yet, I wait some things to be done first.

So, this is considered media blasted and not brushed?

No, this an impression caused by the light, it is a brushed finish.

 

[rumthin]

Heys guys. Just looking for a little help with my ss paps 2.5. I've had it for a couple of days now. It's beautiful btw, but I've recently run into a problem. It just isn't firing properly, and the fire button is getting very warm hottish.

I have an rsst on top and the rsst is firing fine on my sigelei, so I know it isn't a problem with the rba. The coils on the rsst warm up, but they don't glow red on my paps. The weird thing is, it was working perfectly fine until I decided to clean my rsst. I think it might be a conductivity issue, as my igo-l and diver work on the paps, but everything is just a lot weaker now.

Any suggestions?

 

[Idaholandho]

chris which mod is a copy? if you mean the astro, i dont think its a copy... poorly designed maybe, but not a copy.



the arrow is a very nice atty, my gf had one for about a week, but traded it for a mini micro, the reason being that it is 17mm, for the bagua which is 17mm, my gf's piccolo 2.5 is 16mm, and the 3.0 piccolos have a top cap that tapers down to 16mm at the top, so you may have a bit of a gap, or ledge with the arrow. only about 1mm though. but thats the main reason she went with the mini micro instead of the arrow, for her piccolo.



thats a senesis, i think theyre pretty sweet and they have a solid brass post, pedro was supposed to make a genny but never did.

Kiba in the houuuuse. Not so much a clone but in general. There are obvious similarities with the Astro that are in question for many. I saw my first astro 2 months ago and it felt cheapish, I think the lunar designs didn't help. I didn't put the similarities together until the above post. I think the mercury may be a bit better in terms of looks. We'll see.

 

[perseas]

Heys guys. Just looking for a little help with my ss paps 2.5. I've had it for a couple of days now. It's beautiful btw, but I've recently run into a problem. It just isn't firing properly, and the fire button is getting very warm hottish.

I have an rsst on top and the rsst is firing fine on my sigelei, so I know it isn't a problem with the rba. The coils on the rsst warm up, but they don't glow red on my paps. The weird thing is, it was working perfectly fine until I decided to clean my rsst. I think it might be a conductivity issue, as my igo-l and diver work on the paps, but everything is just a lot weaker now.

Any suggestions?

The Paps is a completely mechanical mod, so if it feels weaker, something has changed: the battery, the resistance value, the 510 connection of the atty, the negative post, the positive post, the spring. If the button is getting very warm, check the spring, whether it is dislocated and causes any short. You have to take apart the switch. Unscrew the holding nut by turning it clockwise, dismantle the switch and assemble it again with the spring in its proper position. Inspect also the 510 connection of your atty. Look at your battery, if the coating is peeled off somewhere.

 

[TroyDestroy]

Yes, the tube will be like that, we are still testing the button, if it will be silver plated or something else.

how about top cap and switch in the lux material with a SS brushed sleeve? like a lux but opposite? you could call it the XUL??? i'd be all over that!

 

[negrete35]

Yes, the tube will be like that, we are still testing the button, if it will be silver plated or something else.

So, the tube may actually be silver plated?! That would be pretty cool, but please also do the tube like the one shown on facebook, I love the polished GP and the brushed finish. I like to use my mods and I would be afraid to even think of using a polished Silver plated tube.

 

[qorax]

For the Provari?

Hi Cobra, here's what Alvinado has on her Lux... pretty cool I must say:

It is complete, this is officially my nicest PV

Paps lux with Synthesis and ghost modder drip tip

Synthesis RBA with Brass Sleeve

 

[qorax]

So, the tube may actually be silver plated?! That would be pretty cool, but please also do the tube like the one shown on facebook, I love the polished GP and the brushed finish. I like to use my mods and I would be afraid to even think of using a polished Silver plated tube.

Not the Tube... he's talking about the Button.