GP Series by VapourArt - Official Thread for GP Spheroid, GP PAPS, X, GP Piccolo, GP SnP and more - Part 3

[newyork13]

I ordered my new Piccoloid. Looking forward to it.
As I recall, it was often mentioned that a reduction in nicotine levels was normal moving from other devices to Spheroid/Heron. Although I do tend to vape 6mg in my Spheroid vs. 12 otherwise, I'm not entirely sure.
What are other folks experiencing?
And, do v4 spheroid users feel any difference in nic % in a fluff vs. fluffness mode in the spheroid?

 

[Firestorm]

As I recall, it was often mentioned that a reduction in nicotine levels was normal moving from other devices to Spheroid/Heron. Although I do tend to vape 6mg in my Spheroid vs. 12 otherwise, I'm not entirely sure.
What are other folks experiencing?
And, do v4 spheroid users feel any difference in nic % in a fluff vs. fluffness mode in the spheroid?

I use 6mg in all of my atomizers and I build them at the same resistance and I can't say that I notice a difference in my nicotine intake when I compare a Spheroid or Heron to a KFL or Calix for example. I also can't say that I notice a difference in my nicotine intake whether I run with or without fluff in a Spheroid. There could be some validity to it, but I haven't noticed it and I can't offer with anything empirical either way.

 

[Woody7781]

My new favorite coffee: Dark Matter Unicorn Blood

Unicorn Blood is a Northern Italian inspired espresso blend for all walks of life. This espresso will tease your palate's deepest pleasures with massive walnut aroma, creamy peanut butter body, and an intense yet balanced milk chocolate finish. Unicorn Blood is mildly acidic, with a mouth-encompassing comfort that will have you desire more, shot after shot.

Notes: peanut butter, walnut, milk chocolate.

It tastes great with Grant's and there's no better mod than my Paps.

Wow. I need to try that stuff. Sounds right up my alley.

 

[RedhatPat]

We take seriously the concept of making uncomplicated mods with long lasting quality and we feel very pleased when this is acknowledged. Thank you very much!

I'm greatful to be using you 'n the rest of the GP team's products because of two simple reasons. The first reason is a no-brainer, it's lasted years and years enough that I stop counting because every year bleeds into the next. So you have my confidence.

Secondly, from some observation since I have been back -- it is clear that your family wont sit still. In other words, you're always trying to better yourselves with your fingers on the pulse of the community.

Be well my friend and thank you from all of us,

RhP

 

[newyork13]

As I await shipment of my new piccoloid, a question or two for my friends.
I anybody running the new spheroid without fluff but with silica wicks?
If I understand the new setup right, my current build using a silica loop won't be appropriate as the tails will be pointing downward within the cap.
To use silica wicks I'm wondering if I should use one strand and cut them to the circumference of the deck or two or what?
Any experiences or thoughts folks can share?

 

[landman2k1]

As I await shipment of my new piccoloid, a question or two for my friends.
I anybody running the new spheroid without fluff but with silica wicks?
If I understand the new setup right, my current build using a silica loop won't be appropriate as the tails will be pointing downward within the cap.
To use silica wicks I'm wondering if I should use one strand and cut them to the circumference of the deck or two or what?
Any experiences or thoughts folks can share?

You can use silica, you just won't need the loop. You would have the tails cut right at the cap just like a cotton build a la Qorax. As for the number of strands, I guess that depends on the thickness of the silica, but I would guess you want the holes somewhat filled without choking. Q's build should work equally well for silica as it does cotton. Hope that helps. =)

 

[newyork13]

You can use silica, you just won't need the loop. You would have the tails cut right at the cap just like a cotton build a la Qorax. As for the number of strands, I guess that depends on the thickness of the silica, but I would guess you want the holes somewhat filled without choking. Q's build should work equally well for silica as it does cotton. Hope that helps. =)

yes, thanks

 

[MKID]

 

[Bahiaboy]

Well my New Piccoloid arrived this afternoon amazing delivery time 1 day to get here to Spain
I have coiled it up as per Qorox Vids and it is fine with no leaks a Great Vape !
I have a question though
I am using AW IMR 14500 Battery,s nipple top , I have an issue where it fires when I unlock it no pressure on the fire button
Unlocking it seems to fire it straight away ?
Is there an adjustment I need to make or do I need flat top Batts
Any ideas or information greatfully received

 

[perseas]

Well my New Piccoloid arrived this afternoon amazing delivery time 1 day to get here to Spain
I have coiled it up as per Qorox Vids and it is fine with no leaks a Great Vape !
I have a question though
I am using AW IMR 14500 Battery,s nipple top , I have an issue where it fires when I unlock it no pressure on the fire button
Unlocking it seems to fire it straight away ?
Is there an adjustment I need to make or do I need flat top Batts
Any ideas or information greatfully received

Check please the if you have installed the shorter pin for the GPin. In case the issue persists, contact us at info@vapourart.com and we shall fix it, no worries.

 

[Bahiaboy]

Check please the if you have installed the shorter pin for the GPin. In case the issue persists, contact us at info@vapourart.com and we shall fix it, no worries.

Thank you for the Quick response
The shorter pin was fitted,I took the firing switch apart and gave it a turn on the Screw ! It seems to be working fine now !
Must say though for the size this little Piccoloid is an astonishing device Great Flavour and Great Vape 10/10

 

[perseas]

Thank you for the Quick response
The shorter pin was fitted,I took the firing switch apart and gave it a turn on the Screw ! It seems to be working fine now !
Must say though for the size this little Piccoloid is an astonishing device Great Flavour and Great Vape 10/10

I am glad that it works flawlessly now! Thank you very much for the feedback

 

[Rhody]

Just wanted to say, absolutely LOVE,LOVE,LOVE my spheroid v4....but I have a question, it's been
leaking past couple of days. I must be doing something wrong, I've re-wicked it many times, but still get some leaking from the air hole. I have about 2mm cellucotton sticking out of the cap, maybe it's too much
or not enough, not really sure.
I'd appreciate any help....

 

[perseas]

Just wanted to say, absolutely LOVE,LOVE,LOVE my spheroid v4....but I have a question, it's been
leaking past couple of days. I must be doing something wrong, I've re-wicked it many times, but still get some leaking from the air hole. I have about 2mm cotton sticking out of the cap, maybe it's too much
or not enough, not really sure.
I'd appreciate any help....

Hello buddy

Try please a build with a moderate cotton density, cut the cotton edges very near to the slots. The leaking is an indication of over wicking or weak battery.

 

[Rhody]

Thank you Perseas for you help...I'll try that

 

[perseas]

Thank you Perseas for you help...I'll try that

I haven't try celucotton with v4. My experiences on cellucotton with v3 were not good. Not due to any leaking, I hadn't, but I cannot stand the taste. I prefer pure cotton like KGD. In my opinion, nothing beats it.

 

[Rhody]

I may try KGD next if the cellucotton doesn't do it....re-wicked it already and so far so good.
I've never minded the taste of cellucotton, KGD tastes really good too, and I think I'll do that next
Sometimes the slightest change in something makes all the difference.

 

[qorax]

Spheroid (v4) in use again

 

[perseas]

Happy Vaporday. Was gonna pull the trigger on a Piccoloid, but me and paypal are not on good terms right now since they busted me using a VPN, which, according to their terms of service, means I'm a malicious super hacker cyber criminal.

The other option is wire transfer, you can send us an email at info@vapourart.com for details.

 

[perseas]

Spheroid (v4) in use again

Educational, short and funny in a Qorax style, keep on bro!