Griff's Leather Mod Holsters

[Ruppy]

But it is a GOOD product Griffin Build it well and buyers will come. You got the first part right already

 

[Stownz]

Sorry about that rebar - I do still have your Reo Mini holster on my list of things to try to put together. I've got one big project to (hopefully) finish this week, and then I might be able to get to some of these other mod holsters that folks have been asking about.

Just so everyone understands; if I don't reply to requests for holsters for specific mods right away, it's because the only way I know if I can make one is to try it, and that's a little tricky with mods I don't own. I have to get accurate measurements, then make a wooden form, then work up a pattern and then actually make a holster to ensure that the pattern is good, and it usually takes at least two tries to get it just right.

I figure it takes roughly four hours to get a basic pattern worked up, and then it takes about an hour and a half of actual work time to put one good holster together from the final pattern (plus six to eight hours of drying time). Then I have to sell two of the holsters just to cover the cost of materials involved in working up the pattern.

This is a fun hobby but it's not really a very good business model...

Time to start buying mods, some really incredible ones out there!

Sent from my A500 using Tapatalk

 

[rebar]

Sorry about that rebar - I do still have your Reo Mini holster on my list of things to try to put together. I've got one big project to (hopefully) finish this week, and then I might be able to get to some of these other mod holsters that folks have been asking about.


This is a fun hobby but it's not really a very good business model...

No hurry Tom. I understand. Life comes before hobbies.

I guarantee the measurements Iv sent are accurate. 1 1/2" X 3/4" X 4 3/4" tall with a cannon drop-tip and LR306. The height without the atty and drip tip is 3 1/8"
If we can come up with a good design, I bet you could turn this hobby into a business though since the Reo's are so popular. VP's aren't going away.. If you wanted that is..

Thing is with the reo's.. Your pulling it out by the atomizer. It cant fight tight, or you may pull the drip tip off trying to remove it. Been there done that! You might have to groove the bend lines so the holster is square and the reo slides out easy.

 

[Stownz]

PM me , then you can paypal me an invoice for that Reo Mini holster, don't care how long it takes to make.

 

[cliffy1]

Did you get a web site set up Griffen?

 

[Zoranth]

I would also be very interested in a couple of holsters for GGTS/AVS & GGTS/UFS

 

[Griffin]

I've fallen a bit behind on things and need some time to get caught up and do some reorganizing, so I won't be taking any new orders for a while. I do still have the following holsters already made up and ready to ship for $24.95, including first class shipping within the US:

2x Buzz/GLV2 Flip Top Holster with Sewn Leather Belt Loop
1x Buzz/GLV2 Flip Top Holster with Steel Spring Clip
1x Buzz/GLV2 Flip Top Holster with Sewn Leather Belt Loop & Snap Closure

3x Silver Bullet/Omega Flip Top Holster with Sewn Leather Belt Loop
2x Silver Bullet/Omega Flip Top Holster with Steel Spring Clip
1x Silver Bullet/Omega Flip Top Holster with Sewn Leather Belt Loop & Snap Closure

2x Saber Touch (Detailed Caps) Flip Top Holster with Steel Spring Clip


I also have a few Open Top holsters available for $14.95. These are identical in construction to the Flip Top holsters above but without the flap and tuck band. The fit on these is tighter, to keep the mod in place. You will probably have to remove the Silver Bullet/Omega holster from your belt to get the mod out, but they should loosen up a bit with use. (This is not an issue with the Saber Touch version, though.)

3x Silver Bullet/Omega Open Top Holster with Steel Spring Clip
1x Silver Bullet/Omega Open Top Holster with Sew Leather Belt Loop
2x Saber Touch (Detailed Caps) Open Top Holster with Steel Spring Clip
1x Ali'i (or other 2" x 4" x 1 1/16" box mod with button on top) Open Top Holster with Steel Spring Clip


I'll update quantities as these sell out and will post again once I've gotten caught up and am ready to resume taking orders.

 

[Rosco]

Do the open top holsters have steel spring clips?
I'm loving my holster and use it Constantly...as in my Buzz stays in it all the time except when I change batteries.

 

[Stownz]

Does the buzz holder have a little slot for the screwdriver, and can it be engraved with a patent lawyers phone number?

 

[Scottitude]

Does the buzz holder have a little slot for the screwdriver, and can it be engraved with a patent lawyers phone number?

May be one of the best posts ever!

 

[rebar]

I just received mine. Very nice. Super Heavy leather. 1/16" gap so reo mini slides in and out without being snug. I feel lucky to have had Tim make me one.

 

[bmwjen]

I wonder how many times I can say "gorgeous" in one post without getting cut off...........lol

I got my Reo Mini holster & a holster to fit both my Prodigy & Infinity today & can't stop staring at them, & sliding my Reo mini in & out of it's new holster! WOW!!!! This is a must have accessory & we all know it's all about accessorizing these days!

This black leather is beautiful! It smells awesome! I love the leather stamping! My husband even commented on them saying what a very "neat/clean" job Tim did on the holsters. I'm most likely not gonna wear mine on the daily, but I will wear it to a concert, or event type thing. It's gonna look sharp with jeans & black leather boots this fall!

I also feel super lucky that I was able to have Tim make these for me

 

[Griffin]

I'm finally caught up so I can start taking orders again. Open Top holsters are now available for some mods and I've also added open-top box mod holsters for the Rio Grand and Rio Mini.

These open-top holster fit pretty tightly, to keep the mod in place and have the same open bottom design as the flip-top holsters to make it easier to remove the mod.

I've also recycled an old domain and set up a web site for ordering holsters at SerenityGear Leather.

Prices have been lowered a bit too - all of my "standard" holsters are now $24.95 including first-class shipping within the US.

 

[llvickie]

Nice holsters!

 

[marcalbar]

Hey Griffin!

Just placed an order for an open-top box mod holster for my Grand and Mini! Can't wait!

Marc

 

[Griffin]

Thanks for your order, Marc! I'll get those out to you in a couple of hours and will send the delivery confirmation number by email.

 

[rebar]

Tim went way above and beyond with my Reo mini holster. To make a long story short. He made me another because I kept breaking off my 306 atty's at work with the first holster. This new holster protects the entire mini and you push it up and out from the bottom. Plus, I wear mine everywhere and now it doesn't look like I'm packing a detonator device. Thanks Tim!

 

[Rosco]

Yep...he does Great work. My holster is months old and has been used 24/7 since the day I got it. I don't even have to remove the Buzz to vape...it's awesome.
Clip it to my pocket or belt...pull it off and vape - clip back again. Perfect.

 

[Griffin]

Thanks very much folks!

Sorry that it took so long to get it right rebar, but I'm glad it's working for you!

 

[Mvgratz]

I'm finally caught up so I can start taking orders again. Open Top holsters are now available for some mods and I've also added open-top box mod holsters for the Rio Grand and Rio Mini.

These open-top holster fit pretty tightly, to keep the mod in place and have the same open bottom design as the flip-top holsters to make it easier to remove the mod.

I've also recycled an old domain and set up a web site for ordering holsters at SerenityGear Leather.

Prices have been lowered a bit too - all of my "standard" holsters are now $24.95 including first-class shipping within the US.

Ohhh, I like those! Come payday I'll have to get a "Grand" and a "Mini" from you.